TECHNICAL GUIDE
MODELS: MX
MODULAR STANDARD ECM AIR HANDLERS
FOR USE WITH SPLIT SYSTEM
COOLING & HEAT PUMP
1200 - 2000 CFM BLOWERS
3 - 5 TON COILS
OPTIONAL 1 & 3
ELECTRIC HEATERS
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at:
www.york.com
Additional rating information can be found at:
www.ahridirectory.org
ISO 9001
Certified Quality
Management System
635425-YTG-D-0413
DESCRIPTION
This unique modular system allows the flexibility to handle an y
application. These versatile coils and blowers may be used for
upflow, downflow, or horizontal left or right applications. They
may be combined to function as a cooling only unit or with a
heat pump including electric heat for 1 and 3 phase applications. The blower and electric heater could be used as stand
alone electric furnaces.
FEATURES
Blowers - Models to match any air flow or voltage requirement.
The compact size allows easy installation. Blowers are sized to
deliver design air quantity both efficiently and quietly. All models
use a high efficiency brushless DC motor to provide cooling
SEER rating enhancement. The durable, pre-painted steel protects the unit against rust and corrosion. All models have 1 inch
foil face fiber glass insulation, providing a thermal insulation
value of R-4.2.
Coils - Staggered rows of rifled copper tubes are mechanically
expanded into enhanced surface aluminum fins to provide high
heat transfer and long-lasting quality. The MC multi-position
coils may be used for upflow, downflow, and horizontal left or
right applications. Coil cabinets are insulated with 3/4" fo il face
insulation to prevent sweating.
Thermal Expansion Valves - Coils are ordered as "Flex-coil"
units without a factory installed metering device or with R-410A
factory installed TXV’s. Flex-coil models allow for field installed
R-22 or R-410A TXV’s for added flexibility to meet refrigerant
system choice.
Electric Heaters - Both single and three phase electri c heater
models are available to match any requirement. All heaters
include nickel-chromium elements with a 5-year limited warranty on single phase heating elements and 1 year limited warranty on 3 phase heating elements. Sequential operation is
provided to control heaters in all models. Circuit breakers are
used in 208/230 volt, single-phase heaters of 15 KW and larger.
Models equipped with circuit breakers may be altered in the
field to use multi-source power supply. Over-temperature limit
switches provide protection fro m ai rfl o w lo ss w it h fu si bl e li nk
backup protection.
Accessories - A full line of matching accessories available for
use with the blower and coils to allow any type application.
LIMITATIONS
These units must be wired and installed in accordance with all
national and local safety codes.
Voltage limits are as follows:
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
AIR HANDLER VOLTAGE
208/230-1-60 187 - 253
* Rated in accordance with ARI Standard 110, utilization range “A”.
Air flow must be within the minimum and maximum limits approved for electric
heat, evaporator coils and outdoor units.
NORMAL OPERATING
VOLTAGE RANGE*
635425-YTG-D-0413
J
10-3/8”
E
CIRCUIT BREAKER
PANEL
BOTTOM INLET
DIMENSIONS
B
A
K
TOP OUTLET
DIMENSIONS
D
21-1/2”
20-1/2”
DIMENSIONS
FIGURE 1: Dimensions & Duct Connection Dimensions
TA BL E 1: Dimen sio ns
Dimensions
Models
12B
12D 24-1/2 23-1/2 21-19/32
16C 21 20 18-3/32
20D 24-1/2 23-1/2 21-19/32
1.Actual size (Conduit size).
ABDEJK
Height Width Power Control
17-1/2 16-1/2 14-19/32
25
Wiring Knockouts
7/8” (1/2”)
1 3/8” (1”)
1 23/32” (1 1/4”)
1
7/8” (1/2”)
2 Johnson Controls Unitary Products
COOLING CAPACITY - Coil Only
Blower
Model
MX12B
MX12D
MX16C
MX20D
Note: Airflow is calculated for each system tonnage. Capacity varies with O.D. product.
Coil
Model
MC30B**C 1,025
MC36B**C 1,250
MC43B**C 1,220
MC48D**C 1,125
MC60D**C 1,275
MC62D**C 1,450
MC43C**C 1,365
MC48C**C 1,650
MC48D**C 1,525
MC60D**C 1,780
MC62D**C 1,795
Rated
CFM
Entering Air F
(Dry/Wet Bulb)
Multi-Position - Upflow/Downflow/Horizontal
72 41.5 37.8 33.7 29.5
67 36.2 32.4 28.6 24.5
62 29.1 25.3 24.0 19.2
57 24.1 21.5 18.7 15.8
72 52.0 47.3 42.3 37.3
67 41.7 36.8 32.3 27.4
62 32.5 27.3 29.8 22.2
57 27.9 25.8 23.8 22.2
72 81.1 66.3 60.7 48.8
67 65.7 57.0 47.1 37.0
62 54.9 45.2 34.7 24.7
57 42.2 37.4 31.9 26.9
72 46.8 42.4 37.6 33.0
67 37.4 33.3 29.4 24.3
62 28.9 24.6 21.7 19.6
57 25.1 23.3 21.7 19.6
72 53.7 48.4 43.5 37.5
67 43.0 38.0 33.3 27.7
62 33.1 28.1 24.5 22.4
57 28.8 26.5 24.5 22.4
72 91.7 78.4 68.1 52.3
67 73.4 61.5 52.0 38.6
62 57.3 45.6 38.4 31.2
57 49.2 43.0 38.4 31.2
72 68.7 67.6 65.8 54.4
67 67.0 62.7 51.4 39.9
62 59.3 48.8 38.2 26.9
57 46.5 41.1 35.4 29.8
72 100.5 86.4 72.0 56.8
67 80.4 67.5 55.0 42.1
62 62.7 49.9 40.7 34.0
57 53.9 47.2 40.7 34.0
72 69.8 88.2 74.2 60.5
67 83.5 71.6 58.6 44.4
62 65.6 55.5 42.8 30.5
57 52.2 46.6 39.8 33.5
72 110.4 98.3 82.4 66.1
67 91.7 76.9 62.8 47.2
62 72.2 58.3 44.2 29.7
57 55.1 50.4 43.4 36.3
72 122.1 106.5 88.9 72.4
67 98.2 84.0 67.9 51.6
62 68.3 63.9 48.5 32.7
57 59.6 53.2 45.6 38.4
635425-YTG-D-0413
MBH @ Evaporator Temperature and
Corresponding Pressure °F/PSIG
35/61.5 40/68.5 45/76.0 50/84.0
Johnson Controls Unitary Products 3
635425-YTG-D-0413
Physical and Electrical Data - Cooling Only (60 Hz)
Models MX12BN21 MX12DN21 MX16CN21 MX20DN21
Blower - Diameter x Width 10 x 9 10 x 10 10 x 10 10 x 10
Motor
HP 1/31/31/23/4
Nominal RPM 1050 1050 1050 1050
Voltage 230
Amps Full Load (230) 2.8 2.8 4.1 6.0
Type DISPOSABLE OR PERMANENT
1
Permanent Filter
Size 16 x 20 x1 24 x 20 x 1 20 x 20 x 1 24 x 20 x1
Filter Bulk Pack 1PF0601BK 1PF0604BK 1PF0602BK 1PF0604BK
Shipping / Operating Weight (lbs.) 70 / 66 83 / 77 83 / 77 89 / 83
1. Field Supplied.
FULL CASED “A” TYPE MULTI-POSITION
Model Application
MC30B3XC1
MC36B3XC1
MC43B3XC1
MC43C3XC1
MC48C3XC1
MC48D3XC1
MC60D3XC1
MC62D3XC1
Cooling /
Heat Pump
Cooling /
Heat Pump
Cooling /
Heat Pump
Cooling /
Heat Pump
Cooling /
Heat Pump
Cooling /
Heat Pump
Cooling /
Heat Pump
Cooling /
Heat Pump
Refrig.
Conn.
Types
Sweat 4.38 2 14 (2) 18 x 17.5 1 x 0.866 3/8 Enhanced None 54
Sweat 4.86 2 14 (2) 20 x 17.5 1 x 0.866 3/8 Enhanced None 65
Sweat 4.86 3 12 (2) 20 x 17.5 1 x 0.866 3/8 Enhanced None 73
Sweat 4.86 3 12 (2) 20 x 17.5 1 x 0.866 3/8 Enhanced None 75
Sweat 5.35 3 12 (2) 22 x 17.5 1 x 0.866 3/8 Enhanced None 82
Sweat 5.35 3 12 (2) 22 x 17.5 1 x 0.866 3/8 Enhanced None 82
Sweat 5.83 3 12 (2) 24 x 17.5 1 x 0.866 3/8 Enhanced None 86
Sweat 6.80 3 12 (2) 28 x 17.5 1 x 0.866 3/8 Enhanced None 98
Face
Area
(Sq. Ft.)
Rows
Deep
Fin Per
In.
Coil Size
Tube
Geometry
Tube Dia. Fin Type TXV
Operating
Weight
(Lbs.)
Electrical Data - 1 Ø - 208/230-1-60
Models
MX12B
MX12D
MX16C
Heater
Models*
4HK*6500506 0.5 Med/#3 3.6 4.8 12.3 16.4 3.6 4.8 3.6 4.8 3.6 4.8
4HK*6500806 0.5 Med/#3 5.6 7.5 19.2 25.6 2.8 3.75 5.6 7.5 5.6 7.5
4HK*6501006 0.5 Med/#3 7.2 9.6 24.6 32.8 3.6 4.8 7.2 9.6 7.2 9.6
4HK16501306 0.5 Med/#3 9.8 13 33.3 44.4 3.3 4.3 6.5 8.6 9.8 13
4HK165N1506 0.5 Med/#3 10.8 14.4 36.9 49.1 3.6 4.8 7.2 9.6 10.8 14.4
4HK*6500506 0.5 Med/#3 3.6 4.8 12.3 16.4 3.6 4.8 3.6 4.8 3.6 4.8
4HK*6500806 0.5 Med/#3 5.6 7.5 19.2 25.6 2.8 3.75 5.6 7.5 5.6 7.5
4HK*6501006 0.5 MedHi/#2 7.2 9.6 24.6 32.8 3.6 4.8 7.2 9.6 7.2 9.6
4HK16501306 0.5 MedHi/#2 9.8 13 33.3 44.4 3.3 4.3 6.5 8.6 9.8 13
4HK16501506 0.5 MedHi/#2 10.8 14.4 36.9 49.1 3.6 4.8 7.2 9.6 10.8 14.4
4HK16501806 0.5 MedHi/#2 13.2 17.6 45.1 60.1 3.3 4.4 6.6 8.8 13.2 17.6
4HK16502006 0.5 MedHi/#2 14.4 19.2 49.2 65.5 3.6 4.8 7.2 9.6 14.4 19.2
4HK*6500506 0.5 Lo/#5 3.6 4.8 12.3 16.4 3.6 4.8 3.6 4.8 3.6 4.8
4HK*6500806 0.5 Lo/#5 5.6 7.5 19.2 25.6 2.8 3.75 5.6 7.5 5.6 7.5
4HK*6501006 0.5 MedLo/#4 7.2 9.6 24.6 32.8 3.6 4.8 7.2 9.6 7.2 9.6
4HK16501306 0.5 MedLo/#4 9.8 13 33.3 44.4 3.3 4.3 6.5 8.6 9.8 13
4HK16501506 0.5 MedLo/#4 10.8 14.4 36.9 49.1 3.6 4.8 7.2 9.6 10.8 14.4
4HK16501806 0.5 Med/#3 13.2 17.6 45.1 60.1 3.3 4.4 6.6 8.8 13.2 17.6
4HK16502006 0.5 Med/#3 14.4 19.2 49.2 65.5 3.6 4.8 7.2 9.6 14.4 19.2
Max.
Static
Min.
Speed Tap
Total Heat
1
kW Staging
kW MBH W1 Only W2 Only W1 & W2
208v 230v 208v 230v 208v 230v 208v 230v 208v 230v
4 Johnson Controls Unitary Products