Yokogawa TY500 Data sheet

Reliable and Convenient for Maintenance

Digital Multimeter

series Built-in Memory Type Standard Type

Based on Safe Design, Supporting Various Maintenance Applications

•High Precision

⋅ Basic accuracy 0.09%

⋅ True RMS measurement

•

Ensured Field Site Safety

⋅ Conforms to safety standards EN61010-1

1000V CAT.#, 600V CAT.$

⋅ Safety shutters for preventing erroneous insertion

of test leads into current measurement terminals

•New Functions for Yokogawa Middle Class DMMs

⋅ Current direct reading function provided by current clamp sensor (optional)

⋅ Low-pass Filter (LPF)

⋅ Logging-mode memory for 1600 data*

⋅ USB communication, application software*

(Optional DMM communication package)

*TY530 only

•

Closed Case Calibration

Built-in Memory Type

Standard type

LF TY700/TY500-E

Model and Specification Code

Name Model

Digital Multimeter

TY520

TY530

Optional Accessories

Name Model Specification

DMM communication package 92015 USB communication adapter + USB communication cable + Application software Communication package for printer 97016 Printer adapter + Printer cable Printer 97010 Thermal printer Paper width 112mm AC adapter for printer 94005 AC 100V ± 10%

Thermal printing paper 97080 10 rolls (1 set) Test leads 98015 1000V CAT #, 600V CAT $ Red/black (1 set) Test leads with Alligator Clip 99014 1000V CAT #, 600V CAT $ Red/black (1 set) Fuse 99015 440mA/1000V (1 piece/1 unit)

TC-K temperature probe 90050 -50 to 600°C (For liquids)

94006 For Printer, Europe

99016 10A/1000V (1 piece/1 unit)

TY500 General Specifications

Measurement Functions

Additional Functions :Data hold/auto hold/range hold, maximum/minimum/average values (TY530 only), resistance, relative and percentage

Display :3.5-digit LCD: 7-segment

Performance

Test conditions: Temperature and humidity = 23 ± 5°C, 80% RH or less; Accuracy = ± (% rdg + dgt). Note: A response time is the time required for achieving the accuracy specified for the corresponding range.

DC Voltage Measurement( V)

NMRR: 60dB or greater for 50/60Hz ± 0.1% CMRR: 120dB or greater for 50/60Hz (Rs = 1kΩ) Response time: 1 second or less

AC Voltage Measurement (~V)

Range Resolution

600mV 0.1mV 10MΩ, <200pF 6V 0.0001V 60V 0.001V 0.5+5 1+5 600V 0.01V 10MΩ, <50pF

1000V 0.1V Shown above is the accuracy at 5 to 100% of range (200 to 1000V for 1000V range, peak 1500V or less). Response time: 2 seconds or less Add accuracy = ±(2% of reading + 2% of F.S.), except for sinusoidal wave. CMRR: 60dB or greater for DC to 60Hz (Rs = 1kΩ). 4 counts or less is corrected to 0.

Resistance Measurement (Ω)

Range Resolution Accuracy

600Ω 0.1Ω <1.2mA 6kΩ 0.001kΩ <110μA 60kΩ 0.01kΩ <13μA 600kΩ 0.1kΩ <1.3μA 6MΩ 0.001MΩ 0.5+1

60MΩ 0.01MΩ

*1: Accuracy after zero calibration for 600Ω to 6kΩ range. Response time: 2 seconds or less for 600Ω to 600kΩ, 10 seconds or less for 6MΩ to 60MΩ.

Frequency Measurement (Hz) AC coupling, Maximum effective display: 9999

Range (auto-ranging) Resolution Accuracy Input Voltage Range

10.00 - 99.99Hz 0.01Hz

90.0 - 999.9Hz 0.1Hz

0.900 - 9.999Hz 0.001kHz 0.4 - 600V rms

9.00 - 99.99kHz 0.01Hz 0.8 - 100V rms

:DC Voltage, AC voltage, DC current, AC current, resistance, frequency, temperature, capacitance, continuity check, diode test For AC voltage/current, RMS/MEAN detection can be switched (TY530 only). Low-pass filter can be switched on/off

value calculation, memory function (TY530 only), communication function (TY530 only), logging-mode memory (TY530 only), auto power off, backlight

Digital display: [6000] counts Bar graph display: 31-segment Polarity indicator: “-” appears when the polarity is negative Overrange indicator: “OL” Low-battery indicator: “ ” appears at or below the minimum operating voltage.

Range Resolution

600mV 0.1mV 10MΩ 6V 0.001V 60V 0.01V 600V 0.1V 10MΩ 1000V 1V 0.15+2

50/60Hz 40-500Hz 500Hz - 1kHz

0.4+1

1+2(0-40MΩ) 2+2(40-60MΩ)

Accuracy

TY520, TY530

0.09+2

AC coupling, RMS detection (TY530, TY520) crest factor: 3/mean-value detection (TY530 only) sinusoidal wave

Accuracy

Maximum Testing

Current Voltage Voltage

<130nA

0.02+1

Input Resistance Maximum Input Voltage

11MΩ

Input Impedance

1.5+5

Open-circuit

<3.5V

<1.3V

Input Protection

1000V rms

0.2 - 600V rms

11MΩ, <50pF

1000V DC

1000V rms AC

Maximum Input

Voltage

1000V rms AC

1000V DC

Capacitance( )

Range Resolution Accuracy 10nF 0.01nF 2+10* 100nF 0.1nF 1μF 0.001μF 10μF 0.01μF 100μF 0.1μF 1000μF1μF

*1: Accuracy after zero calibration for 10nF to 1μF range.

TY Series Common Accessories

Name Model Specification

TC-K temperature probe 90051 -50 to 600°C (For liquids)

Current clamp probe 96001 For 400A,AC Output: 10mV/A, AC

Carrying case 93029 Hard type (Houses the DMM, the test leads and communication cable)

Measuring Rate :5 times/sec (Frequency: 1 time/sec, Capacitance: max. 0.14 times/sec (1000μF), Resistance: 2.5 times/sec,

Operating Temp. and Humidity Storage Temp. and Humidity Temperature Coefficient Power Supply :Four AA (R6) dry cells Battery Life :Approx. 300 hours (for continuous DC voltage measurement with alkaline cells) Withstanding Voltage :6.88kV for 5 seconds (between input terminals and casing) Dimensions :Approx. 90(W) x 192(H) x 49(D) mm Weight :Approx. 570g (including batteries) Compliance with Standards

Standard Accessories :AA (R6) dry cells: 4, Test lead set (98015): 1, Fuse (installed) 440mA/1000V and 10A/1000V, Instruction manual: 1

DC Current Measurement ( A)

Range Resolution Accuracy

600μA 0.1μA 6000μA1μA 0.2+2 60mA 0.01mA 600mA 6A 0.001A 0.5+5 10A 0.01A fuse-protected

Maximum testing current at 600mA of range is 440mA. Response time: 1 second or less.

AC Current Measurement (~A) RMS detection crest factor: 3

Range Resolution

600μA 0.1μA 6000μA1μA 440mA 60mA 0.01mA 600mA 6A 0.001A

10A 0.01A Shown above is the accuracy at 5 to 100% of range (2 to 10A for 10A range). Response time: 3 seconds or less Add accuracy = ± (2% of reading + 2% of F.S.), except for sinusoidal wave. 4 counts or less is corrected to 0.

Diode Test( )

Range Resolution Accuracy Testing Current (Vf=0.6V) Open-circuit Voltage Input Protection Voltage

2V 0.001V 1+2 Approx. 0.5mA <3.5V 1000V rms

Continuity Check( )

Range Resolution Accuracy 600Ω 0.1Ω Buzzer sounds at 50+30Ω or less Approx. 1.2mA <3.5V 1000V rms

Temperature: 0.7 times/sec), Bar graph display: 25 times/sec (DC voltage, diode test: 5 times/sec) :-10 to 55°C; 80% RH or less (no condensation) 40 to 55°C; 70% RH or less :-30 to 70°C; 70% RH or less (no condensation) :Add the accuracy 0.1/°C to the basic accuracy at a temperature within -10 to 18°C and 28 to 55°C.

:Safety EN61010-1, EN61010-031, 1000V CAT#, 600V CAT$, pollution level 2, 2000m max. above sea level

EMC: EN61326-1 Class B, EN55011 Class B Group 1

0.1mA

Input Protection Voltage

2+5

1000V rms

3+5

90055 -20 to 250°C (For surfaces) 90056 -20 to 500°C (For surfaces)

96030 200A,AC 96031 500A,AC 96032 700A,AC 96033 50A,AC 96034 3000A,AC 96035 3000A,AC

Voltage Drop

<0.12mV/μA

<3.3mV/mA

<0.1V/A

50/60Hz 40Hz - 1kHz

0.75+5 1.5+5 <3.3mV/mA

Accuracy

Testing Current (Vf=0.6V)

Temperature Measurement (TEMP)

Range Resolution Accuracy

-50 - 600°C 0.1°C2+2°C 1000V rms

Temperature probe: Type K thermocouple sensor (optional)

Voltage Drop

<0.12mV/μA

<0.1V/A

Open-circuit Voltage

Maximum Input

Current

440mA

fuse-protected

10A

Maximum Input

Current

fuse-protected

10A

fuse-protected

Input Protection Voltage

92015 DMM communication package (TY720, TY710, TY530) 97016 Communication package for printer (TY720, TY710, TY530) 98015 Test leads 99014 Test leads with Alligator Clip

97010 Printer 90055 TC-K temperature probe 96001 Current clamp probe 93029 Carrying case

Current Clamp Probes

Name 96036 96033 96030 96031 96032 96034 96035

Current Clamp Probe

*9V battery-operated.

Measurable Conductor Diameter dia. 40mm dia. 18mm dia. 30mm dia. 30mm dia. 65mm dia. 65 x 100mm dia. 170mm Measurement Range 2A,AC 50A,AC 200A,AC 500A,AC Output Voltage 50mV,AC 500mV,AC 500mV,AC 500mV,AC 250mV,AC 500mV,AC 500mV,AC Accuracy

*varies according to input/Amplitude

Frequency Range 20Hz - 5kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 5kHz 45Hz - 66Hz 30Hz - 1.5kHz 10Hz - 20kHz Maximum Circuit Voltage 50V,AC 300V,AC 600V,AC 600V,AC 600V,AC 600V,AC 1000V,AC (pri)

±0.5% of rdg ±0.5% of rdg ±0.5% of rdg ±0.5% of rdg ±1.0% of rdg ±1.0% of rdg ±1.0% of rdg

700A,AC (1000A for 5 minutes)

1000A, 2000A, 3000A, AC

Can be AC adaptor-operated (optional)

300 - 3000A,AC