Yokogawa TIO0110 Data sheet

General

TIO0110 SENSOR MODULE

Thermocouple, mV Measure & Simulate Module for

Specifications

The TIO0110 is a thermocouple (T/C) measurement and simulation module for use with the Yokogawa Tester. The module will accurately measure or source ±110 milliVolts (mV) for any of twelve (12) different T/C types according to NIST 175, ITS-90 (default) or ITS-68 standards. In the measure mode, the TIO0110 module converts mV dc to temperature value in the userselected temperature unit (°F, °C, °R or °K) and per the selected standard. Milli-volts can also be displayed for direct reading or trouble shooting needs. In the source mode, the TIO0110 module sources an accurate mV signal to simulate a T/C input to a receiving device. Users can enter the precise simulation temperature value, change the value with ramping controls on the YPC, or set-up and select from three Auto-step test procedures per T/C type. Test points are determined by the user and can be stepped through automatically or manually as desired. See T/C Table on page 2 for available T/C types and measurement / simulation accuracy. Field recalibration of the module is provided by the YPC’s “Rcal” feature. “Rcal” can be used to re-calibrate the module alone or the module with dedicated RTD for “match set” accuracy. The module + RTD option provides the best possible measurement accuracy for the most demanding measurement applications.

YPC 4000 Series Multi-Function

use with YPC4000 and YPC 4010

TIO0110 Sensor Module with Connector Accessories

T/C calibration coefficients are factory loaded into module memory for instant access by the base YPC unit. Field recalibration of the module is provided by the YPC’s “Rcal” feature.

Available certifications include:

• NIST traceable mV functions – standard

• CE Mark

• Intrinsically Safe – YPC Laboratories per CSA C22.2 & UL 913 Class I Division I, Groups A, B, C & D

TIO0100 Sensor Module with

Mini-T/C socket

Specifications for TIO0100 Module

Specifications: TIO0100 Input impedance: > 10 megohms Warm-up time: ≤ 1 Minute to full rated accuracy mV Accuracy : ± 0.025% R + 0.005% FS Temperature Effect: ≤ 2uV/°C T/C Meas. Accuracy: ± 0.3°C for E, J, K, N, & T types T/C Meas. Accuracy: ± 1.0°C for B, R & S types T/C Meas. Accuracy: ±0.5°C for C, D, M & P types Cold junction effect: ± 0.5°C max Resolution: ± 0.1° or ± 1° for T/Cs, ± 0.001 for mV Voltage range: ± 110.000 mV dc Temperature: Storage: -40° F to 140° F (-40° C to 60° C)

Operating: 23° F to 122° F (-5° C to 50° C)

Accessories:

• A36857 wire kit 1 for E, J, K, N, T types

• A36858 wire kit 2 for B, K, R, S types

• A36881 mV meas / sim cable

Connector - Measure: standard mini-T/C connector

- Source: standard mini-T/C connector Power: supplied from MFT (simulate mode only) Units: °F, °C, °R, °K, mV Weight: 3 ozs

Yokogawa Corporation of America GS 61A YPCTIO-01E-A Dart Road, Newnan, GA 30265, USA ©Copyright November 2004 Tel: 1-800-888-6400 1st Edition November 2004

TC Setup

Current Settings:

TC Type J

Standard ITS 90 Resolution 0.1 deg

Simulate Mode

User Re-Calibrate

Up Down Select Back

YPC Display for

TIO0110 Module Accuracy

(does not include T/C error)

T/C Type Measurement Range Measurement Accuracy Simulation Accuracy

J -210° C to +1200°C ±0.3° C ±0.5° C K -200° C to +1372°C ±0.5° C ±0.5° C T -200° C to + 400°C ±0.3° C ±0.5° C E -200° C to +1000°C ±0.3° C ±0.5° C N -200° C to +1300°C ±0.3° C ±0.5° C R - 50° C to +1768°C ±1.0° C ±1.0° C S 0° C to +1768°C ±1.0° C ±1.0° C

B 250° C to +1820°C ±1.0° C ±1.0° C C 0° C to +2315°C ±0.5° C ±0.5° C D 0° C to +2315°C ±0.5° C ±0.5° C M 0° C to +1410°C ±0.5° C ±0.5° C P 0° C to +1395°C ±0.5° C ±0.5° C

Start Units: C Auto Step 1

Auto Step 2 Auto Step 3

T/C Setup Mode

YPC display for T/C

Simulation Mode