Yealink W90D, W90B Quick Start Guide

http://support.yealink.com/

W90 DECT IP Multi-Cell System

Quick Start Guide

For W90DM/W90B rmware 130.85.0.15 or later

For W59R rmware 115.85.0.20 or later

For W53H rmware 88.85.0.20 or later For W56H rmware 61.85.0.20 or later

For CP930W rmware 87.85.0.20 or later

For DD phone rmware 66.85.0.15 or later

(V85.16)

Table of Contents

English ..........................................1

Deutsch ........................................7

Español ......................................13

Français .....................................19

Package Contents

(0.118”)

SN/MAC/RF

bel

100mm

nter

net

DC5V

Quick Start Guide

Installation

1. Connect the power and the network.

a. AC Power Option

Label

100mm

SN/MAC/RFPI

Internet

DC5V

InternetDC5V

b. PoE (Power over Ethernet) Option

IEEE 802.3af compliant PoE Hub/Switch

InternetDC5V

Note:

• If you choose method a, use Yealink supplied power adapter (5V/1.2A). A third-party power adapter may damage the device.

• If you choose method b, you do not need to connect the power adapter. Make sure the hub/switch is PoE-compliant.

2. Mount W90DM/W90B on the wall.

Optional

E N G L

I S H

N/M A C/RFP

100mm

Label

30 mm

Max:4.5mm (0.177”)

25 mm

Max:3mm

Max:8mm (0.315”)

Min:6.5mm (0.256”)

100mm

3. Adjust the antenna angle.

N G L

I S H

180°

90°

Dening the Device Role

The W90DM is shipped as a DECT Manager (DM) and the W90B is shipped as a base station.

Base Mode Options

The following shows the LED status after the W90DM/W90B connects to the power and network:

Base Mode

Option

1 Base Green Green Off 2 DM Green Orange Off

Role LAN LED ROLE LED DECT LED

Accessing the Web User Interface

1. Do one of the following:

• Find the current IP address of the device on the DHCP server in the list of registered DHCP clients.

• Find the current IP address of the device through a PC scanning tool - Yealink Discovery Tool.

2. Open a web browser on your computer, enter the IP address into the address bar (for example, "http://192.168.0.10" or "192.168.0.10"), and then

press the Enter.

3. Enter the user name (default: admin) and password (default: admin) in the login page and click Login.

Regulatory Notices

Operating Ambient Temperatures

• Operating temperature: +32 to 104°F (0 to 40°C)

• Relative humidity: 5% to 90%, noncondensing

• Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty

Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for nancial damages, lost prots, claims from third parties, etc., arising from the use of this product. DC symbol

is the DC voltage symbol.

Restriction of Hazardous Substances Directive (RoHS) This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com. Safety Instructions

Save these instructions. Read these safety instructions before use!

To reduce risk of re, severe personal injury and damage to property, read the following safety information carefully before using the product.

Environmental Requirements

• Place the product on a stable, level and non-slip surface.

• Do not place the product close to heat sources, in direct sunlight or next to any

house hold appliance with strong magnetic eld or electromagnetic eld, such as a microwave oven or a refrigerator.

• Do not allow the product to come into contact with water, dust and chemicals.

• Protect the product from aggressive liquids and vapors.

• Do not place the product on or near any inammable or re-vulnerable object, such

as rubber-made materials.

• Do not install the product in rooms with high humidity, for example, in bathrooms, laundry rooms and wet basements.

Safety Notes During Operation

E N G L

I S H

• Use only spare parts and accessories supplied or authorized by Yealink. The operation of non-authorized parts cannot be guaranteed.

• Do not place heavy objects on top of the handset or the base station in case of dam age and deformation caused by the heavy load.

• Do not open the handset or the base station by yourself for repair purpose, which could expose you to high votages. Have all repairs carried out by authorized service

personel.

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,

Huli District, Xiamen City, Fujian, P.R.C

Tel: +86-592-5702000

Fax: +86-592-5702455

• Do not let a child operate the product without guidance.

N G

• Keep the small accessories contained in your product out of reach of small children in case of accidental swallowing.

• Before plugging or unplugging any cable, make sure that your hands are completely

dr y.

• Do not hold the handset up to your ear when speakerphone is on or when the ringer is ringing as the volume can be very loud, which may be harmful to your hearing.

• During a thunderstorm, stop using the product and disconnect it from the power supply to avoid lightning strike.

• If the product is left unused for a rather long time, disconnect the base station from the power supply and unplug the power adapter.

• When there is smoke emitted from the product, or some abnormal noise or smell, disconnect the product from the power supply, and unplug the power adapter

immediately.

• Remove the electrical cord from an outlet by pulling gently on the power adapter,

not by pulling the cord.

Notices of Cleaning

• Before cleaning the base station, stop using it and disconnect it from the power supply.

• Remove the battery before cleaning the handset to reduce risk of electric shock.

• Only clean your product with a piece of slightly moist and anti-static cloth.

• Keep the power plug clean and dry. Using a dir ty or wet power plug may lead to electric shock or other perils.

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,

Huli District, Xiamen City, Fujian, P.R.C

Tel: +86-592-5702000

Fax: +86-592-5702455

ENVIRONMENTAL RECYCLING

Never dispose of the device with domestic waste

Ask your Town Council about how to dispose of it in an environmentally friendly way. The cardboard box, plastic packaging and player components may be recycled in accordance with prevailing recycling regula-

tions in your country.

Always adhere to prevailing regulations

Those who fail to do so may be ned or prosecuted in accordance with the law. The crossed out garbage can that appears on the device means that when it has reached the end of its useful life, it should be taken to a special waste disposal center and treated separately to general urban waste.

Troubleshooting The unit cannot supply power to Yealink device. There is a bad connection with the plug.

1. Clean the plug with a dry cloth.

2. Connect it to another wall outlet. The usage environment is out of operating temperature range.

1. Use in the operating temperature range. The cable between the unit and the Yealink device is connected incorrectly.

1. Connect the cable correctly. You cannot connect the cable properly.

1. You may have connected a wrong Yealink device.

2. Use the correct power supply. Some dust, etc., may be in the port.

1. Clean the port. Contact your dealer or authorized service facility for any further questions. Contact Information YEALINK NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th oor, 1077ZX Amsterdam, The Netherlands YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Made in China

E N G L

I S H

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,

Huli District, Xiamen City, Fujian, P.R.C

Tel: +86-592-5702000

Fax: +86-592-5702455

NAME: DATE

TITLE:

N G L

I S H

We, YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD, Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C

CE DATE: 20th /September/2020

declare that the product

Type: DECT IP Multi-Cell Base Station, DECT IP Multi-Cell Dect Manager Model: W90B,W90DM

meets the essential requirements and other relevant provisions according to the following EC directive Directive: 2014/30/EU, 2014/35/EU, RED 2014/53/EU; The presumption of conformity with the essential requirement is ensure according to: Article 3.1 a : (protection of the health &the safety of the user) Safety: EN 62368-1:2014/AC2015 SAR: ETSI EN 50385:2017 Article 3.1 b : (protection requirement with respect to electromagnetic compatibility) EMC: EN55032:2012+AC:2013 and EN55032:2015+AC2016 EN55035:2017 EN301489-6 V2.2.2,EN301489-1 V2.2.2 Article 3.2 (effective use of the radio spectrum) Radio: ETSI EN 301406 V2.2.2 Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 8 June 2011 and 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(RoHS 2.0) Directive 2012/19/EU of the European Parliament and of the Council of 4.July.2012 on Waste electrical and electronic equipment(WEEE) Regulation (EC) No.1907/2006 of the European Parliament and of the Council of 18. December.2006 on Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)

Declaration of Conformity

YEALINK (XIAMEN) NETWORK TECHNOLOGY CO.,LTD

WWW.YEALINK.COM

Stone Lu 20/Sep

/2020

Vice President

Addr: 309, 3rd Floor, No.16, Yun Ding North Road,

Huli District, Xiamen City, Fujian, P.R.C

YEALINK (EUROPE) NETWORK TECHNOLOGY B.V Address: Strawinskylaan 3127, Atrium Building, 8th oor, 1077ZX Amsterdam, the Netherlands Telephone: +31(0)646111373 Email: EUROPE@Yealink.com

Tel: +86-592-5702000

Fax: +86-592-5702455

Verpackungsinhalt

(0.118”)

SN/MAC/RF

bel

100mm

nter

net

DC5V

Quick Start Guide

Optional

Montage

1. Stellen Sie die Stromversorgungs- und Netzwerkverbindung.

a. Option Wechselstromversorgung

Label

100mm

SN/MAC/RFPI

Internet

DC5V

InternetDC5V

b. Option Power-over-Ethernet (PoE)

IEEE 802.3af-konform PoE Hub/Switch

InternetDC5V

Hinweis:

• Wenn Sie sich für Methode a entscheiden, verwenden Sie das von Yealink mitgelieferte Netzteil (5V/1,2A).

Die Verwendung von Netzteilen anderer Hersteller kann das Gerät beschädigen.

• Wenn Sie sich für Methode b entscheiden, müssen Sie das Netzteil nicht anschließen. Stellen

Sie sicher, dass der Hub/Switch PoE-konform ist.

2. Montieren W90DM/W90B an der Wand.

D E U T S C H

S N/M A

C/RFP

100mm

Label

30 mm

Max:4.5mm (0.177”)

25 mm

Max:3mm

Max:8mm (0.315”)

Min:6.5mm (0.256”)

100mm

+ 19 hidden pages