YEALINK T52S Users Manual

Media IP Phone

SIP-T52S

www.yealink.com

Quick Start Guide

Applies to firmware version 74.81.0.1 or later.

(V81.1)

Packaging Contents

The following items are included in your package. If you find anything missing, contact your system
administrator.

Handset Cord

IP Phone

Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved

third-party accessories may result in reduced performance.

Handset

Quick Start Guide

Ethernet Cable

(2m CAT5E FTP Cable)

（Optional） （Optional）

Stand

Wall Mount BracketPower Adapter

Assembling the Phone

1. Attach the stand, as shown below:

40

45

Desk Mount Method

Note: You can also mount the phone to a wall. For more information on how to attach the wall mount bracket,

refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones.

2. Connect the handset and optional headset, as shown below:

Note: The headset should be purchased separately.

1

3. Connect the USB flash drive, as shown below:

Note: The USB port can also be used to connect Wi-Fi USB dongle WF40, color-screen expansion module EXP50

and USB headset. The Wi-Fi USB dongle WF40 and color-screen expansion module EXP50 should be
purchased separately. For more information on how to use the WF40 and EXP50, refer to Yealink Wi-Fi
USB Dongle WF40 User Guide and Yealink EXP50 User Guide. For more information on how to use USB
headset, refer to the documentation from the manufacturer.

4. Connect the network and power, as shown below:

You have two options for network and power connections. Your system administrator will advise you which
one to use.

PC Connection
(Optional)

A

AC Power Option

PC

Power Adapter

(DC 5V)

B

PoE ( Power over
Ethernet ) Option

PC Connection
(Optional)

PC

IEEE 802.3af compliant

PoE Hub/Switch

Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party

power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we
recommend that you use the Ethernet cable provided by Yealink.
If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch
is PoE-compliant.

Startup

After the IP phone is connected to the network and
supplied with power, it automatically begins the
initialization process. After startup, the phone is ready
for use. You can configure the phone via phone user
interface or web user interface.

Welcome

Initializing... Please wait

2