Yamaha XDA-AMP5400RK Owner's Manual

Multi Zone Amplifier Amplificateur Multizone

XDA-AMP5400RK

OWNER’S MANUAL

UAGLF

MODE D’EMPLOI MANUAL DE INSTRUCCIONES

BEFORE USING THE UNIT 3

Accessories ..................................................................... 3

About this manual ....................................................... 3

PART NAMES AND FUNCTIONS 4

Front panel ..................................................................... 4

Rear panel ....................................................................... 5

PLACEMENT AND CONNECTION 6

Placing the unit .............................................................6

Mounting the unit on a rack ................................ 6

Placing the unit without a rack........................... 6

Connecting devices .....................................................7

Connecting speakers.............................................. 8

Connecting speakers in bridge mode .............. 8

Connecting external devices ............................... 8

Connecting the power cord................................. 8

Connection examples ............................................ 9

SPECIFICATIONS 13

Specifications .............................................................. 13

2 En

BEFORE USING THE UNIT

 Front cover x 1  Euroblock plug x 4  Bracket x 2

 Screw x 4

 Non-skid pad x 4

 Jumper plug x 6

 Monaural RCA cable x 2

 Control cable x 3

Accessories

Confirm that all the following items are included in the package.

 Power cord

 Owner’s Manual

 Safety Brochure

Note:

Screws for rack mounting are not included.

About this manual

• This OWNER’S MANUAL explains preparations and operations for installers of the unit. Make sure to deliver this OWNER’S MANUAL to the user after the placement, connection and setup of the unit.

• Read the supplied booklet “Safety Bro chure” before installing and using the unit.

• Due to product improvements , speci f ica tions and appearance are subject to change without notice.

• The illustrations in this manual are for instructional purposes only.

• Access the Yamaha Downloads site to download the latest Owner’s Manual and Safety Brochure. http://download.yamaha.com/

Notice:

Indicates precautions for use to avoid the possibility of malfunction/damage to the unit.

Note:

Indicates instructions and supplementary explanations for optimum use.

En 3

PART NAMES AND FUNCTIONS

ab c

Front panel

a MAIN STATUS indicator

Indicates the unit status depending on its color and whether it i s lit or flashing.

– Unlit Standby White Lit Power on Red Lit Audio Sense on

Flashing Error occurred

b RESET key

Resets the unit. The unit is restarted forcib ly by holding down RESET key for over 10 seconds.

c STATUS indicators

Indicate the AMP1 - AMP4 status depending on whether th ey are lit or flashing.

– Unlit Standby White Lit Power on

d STANDBY keys

Set AMP1 - AMP4 to on / standby. The unit consumes a smal l power even in standby mode. The unit’s standby po wer consumption depends on the standby configuration.

4 En

Rear panel

e gf

a GND screw terminal

Connecting the source device chas sis to the GND terminal of the unit may reduce noise in the signal.

Note

The ground is not a safety g round.

b IR IN/OUT jack

Connection: 3.5 mm monaural mini-plug For connecting to an e xternal remote control device and inputting/outputting remote control signals. The output with passthrough function is enabled even in standby mode.

c AMP 1– 4: IN/THRU. OUT jacks

Connection: stereo RCA plug (L/R) IN: For connecting to an audio playback device such as a CD player (analogout jack) and inputting audio signals in AMP1– AMP4. THRU. OUT: For outputting analog audio signals input in AMP 1– 4 : IN jacks by pass-through functi on. The output is enabled even in standby mode.

d AUTO STANDBY switch

Enables/disables the auto-standby function.

OFF: does not set the unit to standby mode automati c ally. ON: sets the unit to standby mode when there are no operations

for 8 hours.

e TRIGGER IN 1– 4 jacks

Connection: 3.5 mm monaural mini-plug (Tip: + / Sleeve: For inputting trigger signals (DC 12 V). Ea ch AMP i s powered on by inputting “High”.

f TRIGGER OUT 1– 4 jacks

Connection: 3.5 mm monaural mini-plug (Tip: + / Sleeve: For outputting trigger signals (DC 12 V) ib y powering on each AMP.

g NORMAL/BRIDGE switch

Selects NORMAL/BRIDGE connection of speakers. This switch is normally set to NORMAL. Change the setting to BRIDGE only when the speaker is used in bridge connection.

Note

Unplug the unit’s power cord from the AC wall outlet before changing the NORMAL/BRIDGE switch sett ing.

h SPEAKERS terminals

Connection: Euroblock connect ors (supplied) Speaker impedance: 4  or over (NORMAL), 8  or over (BRIDGE) For connecting to speakers with supplied Euroblock connectors.

i AC IN jack

For connecting the supplied power cord.

)

AUDIO SENSE sw i tch

Enables/disables the audio sense function that detects analog audio signals input in AMP 1– 4 : IN.

OFF: disables the audio sense function. ON: detects the input in AMP 1– 4 : IN, and thereby turns

AMP1– AMP4 to on.

Note

Unplug the unit’s power cord from the AC wall outlet before changing the AUDIO SENSE switch setting.

AUDIO SENSE MODE switch

Selects the audio sense mode that determines the amount of time required between input of analog audio signals bei ng detected and analog audio signals being output. STANDBY: outputs analog audio signals about 7 seconds after detecting the input of them. This setting reduces the unit’s standby power consumption.. ACTIVE: outputs analog audio signals within 1 second after detecting the input of them.

En 5

PLACEMENT AND CONNECTION

Without the supplied front cover

With the supplied front cover

Non-skid pads

Bottom face

Placing the unit

 Mounting the unit on a rack

Use the supplied brackets to mount the unit on an EIA standard rack. Screw the brackets to the unit horizontally.

Notice

• Do not use the brackets for devices other than the XDA-

AMP5400.

• When installing brackets, use the included screws.

• Tighten the screws until the brackets are securely fixed.

Note

Screws for rack mounting are not included.

Precautions for rack mounting

If the unit is mounted together with additional units and/or other devices in an EIA standard equipment rack, the internal temperature can rise due to heat generated from the devices, resulting in impaired performance . If the unit is moun ted in a rac k, always observe the following requirements to avoid heat buildup:

• If the unit is mounted in a rack with other devices that

generate a significant amount of heat, such as a power amplifier, leave more than 1U of space between the unit and other devices (both above and below). Also, make sure to either leave an y open spaces unco vered or install appropriate ventilating panels to minimize the possibility of heat buildup.

• To ensure sufficient airflow, leave the rear of the rack open

and position it at least 10 cm from walls or other surfaces.

 Placing the unit without a rack

Affix the supplied non-skid pads at the f our corners on the bottom of the unit, and then place the unit on a shelf or rack.

Note

Allow ventilation space of at least 10 cm (4 in.) on the top, either side and back of the unit.

6 En

Connecting devices

Remote control device (Infrared signal receiver)

Remote control device (Infrared signal transmitter)

XDA-QS5400

Power amplifier (i.e. XDA-AMP5400)

The following is an example of connecting the devices. Unplug the unit’s power cord from the AC wall outlet before connecting the devices.

The unit does not have volume controls. Make sure you connect a device with volume control (such as a pre-amplifier) to the unit. If you connect a device without volume control (such as a CD player) directly to the unit, the volume ma y become excessively loud and result in damage to the unit or speakers.

En 7

 Connecting speakers

Approx. 5 mm (approx. 1/4")

Connect the speakers to the unit with the supplied Eurob lock plug and commercially-available speaker cables.

1 Loosen terminal screws. 2 Insert cables. 3 Securely tighten terminal screws. 4 Insert the Euroblock plug into the SPEAKERS

terminals of the unit.

Note

• You must use the supplied Euroblock plugs . If the plugs have

been lost, please contact your Yamaha dealer.

• Recommended cable gauges for the Euroblock plug: AWG26

(0.13 mm

• To prepare the cable for attachment to a Euroblo c k con nector,

strip the wire as shown in the illustration using stranded wire to make connections. With a Euroblock connection, stranded wires may be prone to breakage because of metal fatigue due to the weight of the cable or due to vibration. When rack mounting your device, use a lacing bar when possible to bundle and fasten the cables.

• Do not tin (solder) the exposed end.

) to AWG16 (1.3 mm2)

 Connecting speakers in bridge mode

Connect the speakers to the unit with the su pplied Eurobloc k plug and commercially-available speaker cables, and set the NORMAL/BRIDGE switch to “BRIDGE”.

Note

Unplug the unit’s power cord from the AC wall outlet before changing the NORMAL/BRIDGE switch sett ing.

 Connecting external devices

 For an external device with analog stereo audio output

Use a commercially-available analog stereo pin cable (stereo audio RCA cable). You can also use supplied jumper plugs and monaural RCA cables for various sound system configurations.

Note

For details on the configurations with supplied jumper plugs and monaural RCA cables, see the following:

• “Connection examples” (p.9)

 For a remote control device

Use a commercially-available 3.5 mm monaural mini-plug cable. For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other devices from another room.

 For a device compatible with the trigger function

Use a commercially-available 3.5 mm monaural mini-plug cable. The trigger function can be controlled by external devices (such as XDA-QS5400) in conjunction with powering on/off the device .

 Connecting the power cord

After all the connections are complete, plug the supplied power cord into the AC IN jack on the rear panel, and then plug the power cord to an AC wall outlet.

8 En

 Connection examples

Source1

Source2

Source3

Source4

Speaker1

Speaker2

Speaker3

Speaker4

AMP1

AMP2

AMP3

AMP4

Source1

Source2

Speaker1

Speaker2

Speaker3

Speaker4

AMP1

AMP2

AMP3

AMP4

Jumper plug x 4

 Example 1

Source1

Source3

Speaker1

Speaker3

 Example 2

Source1

Source2

Source4

Speaker2

LR LR

Speaker1

Speaker4

Speaker2

Source2

Speaker3

LR LR

Speaker4

En 9

 Example 3

Source1

Source2

Speaker1

Speaker2

Speaker3

Speaker4

AMP1

AMP2

AMP3

AMP4

Source1

Source2

LR LR LR

Speaker1

Speaker2 Speaker3 Speaker4

Jumper plug x 4

Stereo

Source1

Speaker1

Speaker2

Speaker3

Speaker4

AMP1

AMP2

AMP3

AMP4

Source1

LR LR LR LR

Speaker1 Speaker2 Speaker3 Speaker4

Jumper plug x 6

 Example 4

10 En

 Example 5

Mono

Source1

Speaker1

Speaker2

Speaker3

Speaker4

AMP1

AMP2

AMP3

AMP4

Jumper plug x 6 Monaural RCA cable x 1

Source1

Source2

Speaker1

Speaker2

Speaker3

AMP1

AMP2

AMP3

AMP4

Source1

Source2

LR LR

Speaker1

Speaker2 Speaker3

Jumper plug x 1 Monaural RCA cable x 1

(High Pow er)

Source1

 Example 6

Mono

Mono Mono Mono Mono Mono Mono Mono Mono

Speaker1 Speaker2 Speaker3 Speaker4

En 11

 Example 7

Source1

Speaker1

Speaker2

AMP1

AMP2

AMP3

AMP4

Source1

LRLR

Speaker1 Speaker2

Monaural RCA cable x 2

(High Power) (High Power)

12 En

SPECIFICATIONS

Specifications

The specifications of the unit are as follows.

Input jacks

Analog Audio

• Stereo Audio (RCA) x 4

Output jacks

Analog Audio

• Speaker Out x 4 (L/R)

• Stereo Audio (RCA) x 4

Other jacks

Trigger In x 4 Trigger Out x 4 Remote In x 1 Remote Out x 1

Audio Section

Rated Output Power

• (2-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 )

90/50 W

• (2-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 ) 100 W

• (1-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 )

100/50 W

• (1-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 ) 200 W

Dynamic Power

• (2-channel driven, 20 Hz to 20 kHz, 0.08% THD, 20ms Burst, NORMAL, 4/8 ) 80/40 W

• (2-channel driven, 20 Hz to 20 kHz, 0.08% THD, 20ms Burst, BRIDGE, 8 ) 150 W

• (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst, NORMAL, 4/8 ) 100/50 W

• (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst, BRIDGE, 8 ) 200 W

• (All channel driven, 1 kHz, 0.9% THD, 20ms Burst, NORMAL(8-ch), 4/8 ) 80/50 W

• (All channel driven, 1 kHz, 0.9% THD, 20ms Burst, BRIDGE(4-ch), 8 ) 170 W

Maximum Effective Output Power (JEITA)

• (1-channel driven, 1 kHz, 10% THD, NORMAL, 4/8 ) 130/65 W

• (1-channel driven, 1 kHz, 10% THD, BRIDGE 8 ) 260 W

Total Harmonic Distortion (THD)

• (20 Hz to 20 kHz, SP OUT, 25 W, 8 ) 0.04% THD

Frequency Response (+0/

• SP OUT (AMP IN) 5 Hz to 40 kHz

Signal to Noise Ratio (IHF-A)

• SP OUT (AMP IN) 108 dB

Maximum Input Signal

• AMP IN (1 kHz, 0.9% THD) 1.0 V

Gain

• SP OUT (1 V INPUT) 25.8 dB

Input Sensitivity

• 1 W power (1 W/8  output) 150 mV

• MAX power (50 W/8  output) 1.0 V

General

Power Supply

• [U.S.A. model] AC 120 V, 60 Hz

• [Other models] AC 220 to 240 V, 50/60 Hz

Power Consumption 130 W

• Amp1 - Amp4 On, No Signal Condition 32 W

• Amp1 - Amp4 Off, Audi o Sense On, Audio Sense Mode Activ e

Standby P ower Consumption

• Audio Sense Off 0.3 W

• Audio Sense On, Audio Sense Mode Standby 0.5 W

Dimensions (W x H x D)

437 x 46 x 443 mm (17-1/4” x 1-3/4” x 17-3/8”)

Weight 6.0 kg (13.2 lbs)

3 dB)

14.8 W

En 13

Reference Dimensions

1-3/4"

481

18-7/8"

453

17-7/8"

5.0

1/4"

481

18-7/8"

443

17-3/8"

5.0

1/4"

1-3/4"

• Brackets with front cover 481 x 44 x 453 mm (18-7/8" x 1-3/4" x 17-7/8")

• Brackets 481 x 44 x 443 mm (18-7/8" x 1-3/4" x 17-3/8")

• Table Top Mount-with front cover 437 x 46 x 453 mm (17-1/4" x 1-3/4" x 17-7/8")

437

17-1/4"

443

17-3/8"

1-3/4"461-3/4"

453

* The contents of this manual apply to the latest specifications

as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.

17-7/8"

14 En

+ 30 hidden pages

Yamaha XDA-AMP5400RK Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

CONTENTS

BEFORE USING THE UNIT

Accessories

About this manual

PART NAMES AND FUNCTIONS

Front panel

Rear panel

PLACEMENT AND CONNECTION

Placing the unit

 Mounting the unit on a rack

 Placing the unit without a rack

Connecting devices

 Connecting speakers

 Connecting speakers in bridge mode

 Connecting external devices

 Connecting the power cord

 Connection examples

SPECIFICATIONS

Specifications