Yamaha XC115S User Manual

Read this manual carefully before operating this vehicle.

OWNER’S MANUAL

XC115S

2EP-F8199-E0

EAU46090

Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.

INTRODUCTION

WARNING

EAU10113

Welcome to the Yamaha world of motorcycling!
As the owner of the XC115S, you are benefiting from Yamaha’s vast experience and newest technology regarding the design
and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
Please take the time to read this manual thoroughly, so as to enjoy all advantages of your XC115S. The Owner’s Manual
does not only instruct you in how to operate, inspect and maintain your scooter, but also in how to safeguard yourself and
others from trouble and injury.
In addition, the many tips given in this manual will help keep your scooter in the best possible condition. If you have any fur­ther questions, do not hesitate to contact your Yamaha dealer.
The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first!
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur­rent product information available at the time of printing, there may be minor discrepancies between your scooter and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.

Please read this manual carefully and completely before operating this scooter.

EWA12411

IMPORTANT MANUAL INFORMATION

WARNING

NOTICE

TIP

Particularly important information is distinguished in this manual by the following notations:

This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.

A WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.

A NOTICE indicates special precautions that must be taken to avoid damage to the
vehicle or other property.

A TIP provides key information to make procedures easier or clearer.

*Product and specifications are subject to change without notice.

EAU10133

IMPORTANT MANUAL INFORMATION

EAU37431

XC115S

OWNER’S MANUAL

©2013 by Thai Yamaha Motor Co., Ltd.

1st edition, March 2013

All rights reserved.

Any reprinting or unauthorized use

without the written permission of

Thai Yamaha Motor Co., Ltd.

is expressly prohibited.

Printed in Thailand.

TABLE OF CONTENTS

SAFETY INFORMATION ..................1-1

Further safe-riding points ................1-5

DESCRIPTION ..................................2-1

Left view ..........................................2-1

Right view........................................2-2

Controls and instruments.................2-3

INSTRUMENT AND CONTROL

FUNCTIONS .......................................3-1

Main switch/steering lock ................3-1

Keyhole cover .................................3-2

Indicator lights and warning light ....3-2

Speedometer unit ...........................3-3

Handlebar switches ........................3-3

Front brake lever ............................3-4

Rear brake lever .............................3-4

Fuel tank cap ..................................3-5

Fuel .................................................3-5

Catalytic converter ..........................3-6

Seat ................................................3-7

Helmet holders ...............................3-8

Storage compartments ...................3-9

Luggage hook ...............................3-10

Sidestand ......................................3-10

Ignition circuit cut-off system ........3-11

FOR YOUR SAFETY –

PRE-OPERATION CHECKS .............4-1

OPERATION AND IMPORTANT

RIDING POINTS.................................5-1

Starting the engine .........................5-1

Starting off ...................................... 5-2

Acceleration and deceleration ........ 5-2

Braking ...........................................5-3

Tips for reducing fuel

consumption ...............................5-3

Engine break-in ..............................5-3

Parking ...........................................5-4

PERIODIC MAINTENANCE AND

ADJUSTMENT ................................... 6-1

Owner’s tool kit ...............................6-2

Periodic maintenance chart for the

emission control system ............. 6-3

General maintenance and

lubrication chart ..........................6-4

Removing and installing the

cowling and panels ..................... 6-7

Checking the spark plug .................6-8

Engine oil and oil strainer ............. 6-10

Final transmission oil ....................6-12

Air filter and V-belt case air filter

elements ...................................6-13

Adjusting the throttle grip free

play ...........................................6-15

Valve clearance ............................ 6-15

Tires ............................................. 6-15

Cast wheels ................................. 6-17

Checking the front brake lever

free play .................................... 6-17

Adjusting the rear brake lever

free play .................................... 6-18

Checking the front brake pads

and rear brake shoes ............... 6-18

Checking the brake fluid level ...... 6-19

Changing the brake fluid .............. 6-20

Checking and lubricating the

cables ....................................... 6-20

Checking and lubricating the

throttle grip and cable ............... 6-20

Lubricating the front and rear

brake levers .............................. 6-21

Checking and lubricating the

centerstand and sidestand ....... 6-21

Checking the front fork ................. 6-22

Checking the steering .................. 6-23

Checking the wheel bearings ....... 6-23

Battery ......................................... 6-23

Replacing the fuse ....................... 6-25

Replacing the headlight bulb ....... 6-26

Replacing a tail/brake light bulb or

a rear turn signal light bulb ....... 6-27

Replacing a front turn signal light

bulb ........................................... 6-28

Troubleshooting ........................... 6-28

Troubleshooting chart .................. 6-30

SCOOTER CARE AND STORAGE ...7-1

Matte color caution .........................7-1

Care ................................................7-1

Storage ...........................................7-4

SPECIFICATIONS .............................8-1

CONSUMER INFORMATION.............9-1

Identification numbers ....................9-1

TABLE OF CONTENTS

SAFETY INFORMATION

Be a Responsible Owner

1

As the vehicle’s owner, you are respon­sible for the safe and proper operation
of your scooter.
Scooters are single-track vehicles.
Their safe use and operation are de­pendent upon the use of proper riding
techniques as well as the expertise of
the operator. Every operator should
know the following requirements before
riding this scooter.
He or she should:

● Obtain thorough instructions from

a competent source on all aspects
of scooter operation.

● Observe the warnings and mainte-

nance requirements in this Own­er’s Manual.

● Obtain qualified training in safe

and proper riding techniques.

● Obtain professional technical ser-

vice as indicated in this Owner’s
Manual and/or when made neces­sary by mechanical conditions.

EAU1026A

● Never operate a scooter without

proper training or instruction. Take
a training course. Beginners
should receive training from a cer­tified instructor. Contact an autho­rized scooter dealer to find out
about the training courses nearest
you.

Safe Riding

Perform the pre-operation checks each
time you use the vehicle to make sure it
is in safe operating condition. Failure to
inspect or maintain the vehicle properly
increases the possibility of an accident
or equipment damage. See page 4-1
for a list of pre-operation checks.

● This scooter is designed to carry

the operator and a passenger.

● The failure of motorists to detect

and recognize scooters in traffic is
the predominating cause of auto­mobile/scooter accidents. Many
accidents have been caused by an
automobile driver who did not see
the scooter. Making yourself con-

spicuous appears to be very effec­tive in reducing the chance of this
type of accident.

Therefore:

• Wear a brightly colored jacket.

• Use extra caution when you are
approaching and passing
through intersections, since in­tersections are the most likely
places for scooter accidents to
occur.

• Ride where other motorists can
see you. Avoid riding in another
motorist’s blind spot.

• Never maintain a scooter with­out proper knowledge. Contact
an authorized scooter dealer to
inform you on basic scooter
maintenance. Certain mainte­nance can only be carried out by
certified staff.

1-1

SAFETY INFORMATION

● Many accidents involve inexperi-

enced operators. In fact, many op­erators who have been involved in
accidents do not even have a cur­rent driver’s license.

• Make sure that you are qualified
and that you only lend your
scooter to other qualified opera­tors.

• Know your skills and limits.
Staying within your limits may
help you to avoid an accident.

• We recommend that you prac­tice riding your scooter where
there is no traffic until you have
become thoroughly familiar with
the scooter and all of its con­trols.

● Many accidents have been caused

by error of the scooter operator. A
typical error made by the operator
is veering wide on a turn due to ex­cessive speed or undercornering
(insufficient lean angle for the
speed).

• Always obey the speed limit and
never travel faster than warrant­ed by road and traffic conditions.

• Always signal before turning or
changing lanes. Make sure that
other motorists can see you.

● The posture of the operator and

passenger is important for proper
control.

• The operator should keep both
hands on the handlebar and
both feet on the operator foot­rests during operation to main­tain control of the scooter.

• The passenger should always
hold onto the operator, the seat
strap or grab bar, if equipped,
with both hands and keep both
feet on the passenger footrests.
Never carry a passenger unless
he or she can firmly place both
feet on the passenger footrests.

● Never ride under the influence of

alcohol or other drugs.

● This scooter is designed for on-

road use only. It is not suitable for
off-road use.

Protective Apparel

The majority of fatalities from scooter
accidents are the result of head inju­ries. The use of a safety helmet is the
single most critical factor in the preven­tion or reduction of head injuries.

● Always wear an approved helmet.

● Wear a face shield or goggles.

Wind in your unprotected eyes
could contribute to an impairment
of vision that could delay seeing a
hazard.

● The use of a jacket, substantial

shoes, trousers, gloves, etc., is ef­fective in preventing or reducing
abrasions or lacerations.

● Never wear loose-fitting clothes,

otherwise they could catch on the
control levers or wheels and cause
injury or an accident.

● Always wear protective clothing

that covers your legs, ankles, and
feet. The engine or exhaust sys­tem become very hot during or af­ter operation and can cause burns.

● A passenger should also observe

the above precautions.

1

1-2

SAFETY INFORMATION

Avoid Carbon Monoxide Poisoning

All engine exhaust contains carbon
monoxide, a deadly gas. Breathing car-

1

bon monoxide can cause headaches,
dizziness, drowsiness, nausea, confu­sion, and eventually death.
Carbon Monoxide is a colorless, odor­less, tasteless gas which may be pres­ent even if you do not see or smell any
engine exhaust. Deadly levels of car­bon monoxide can collect rapidly and
you can quickly be overcome and un­able to save yourself. Also, deadly lev­els of carbon monoxide can linger for
hours or days in enclosed or poorly
ventilated areas. If you experience any
symptoms of carbon monoxide poison­ing, leave the area immediately, get
fresh air, and SEEK MEDICAL TREAT­MENT.

● Do not run engine indoors. Even if

you try to ventilate engine exhaust
with fans or open windows and
doors, carbon monoxide can rap­idly reach dangerous levels.

● Do not run engine in poorly venti-

lated or partially enclosed areas
such as barns, garages, or car­ports.

● Do not run engine outdoors where

engine exhaust can be drawn into
a building through openings such
as windows and doors.

Loading

Adding accessories or cargo to your
scooter can adversely affect stability
and handling if the weight distribution of
the scooter is changed. To avoid the
possibility of an accident, use extreme
caution when adding cargo or accesso­ries to your scooter. Use extra care
when riding a scooter that has added
cargo or accessories. Here, along with
the information about accessories be­low, are some general guidelines to fol­low if loading cargo to your scooter:
The total weight of the operator, pas­senger, accessories and cargo must
not exceed the maximum load limit.

Operation of an overloaded vehicle
could cause an accident.

Maximum load:

156 kg (345 lb)

When loading within this weight limit,
keep the following in mind:

1-3

● Cargo and accessory weight

should be kept as low and close to
the scooter as possible. Securely
pack your heaviest items as close
to the center of the vehicle as pos­sible and make sure to distribute
the weight as evenly as possible
on both sides of the scooter to min­imize imbalance or instability.

● Shifting weights can create a sud-

den imbalance. Make sure that ac­cessories and cargo are securely
attached to the scooter before rid­ing. Check accessory mounts and
cargo restraints frequently.

• Properly adjust the suspension
for your load (suspension-ad­justable models only), and
check the condition and pres­sure of your tires.

• Never attach any large or heavy
items to the handlebar, front
fork, or front fender. Such items
can create unstable handling or
a slow steering response.

● This vehicle is not designed to

pull a trailer or to be attached to
a sidecar.

SAFETY INFORMATION

Genuine Yamaha Accessories

Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are avail­able only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection to
Yamaha manufacture parts and acces­sories or offer other modifications for
Yamaha vehicles. Yamaha is not in a
position to test the products that these
aftermarket companies produce.
Therefore, Yamaha can neither en­dorse nor recommend the use of ac­cessories not sold by Yamaha or
modifications not specifically recom­mended by Yamaha, even if sold and
installed by a Yamaha dealer.

Aftermarket Parts, Accessories, and
Modifications

While you may find aftermarket prod­ucts similar in design and quality to
genuine Yamaha accessories, recog­nize that some aftermarket accessories
or modifications are not suitable be­cause of potential safety hazards to you
or others. Installing aftermarket prod-

ucts or having other modifications per­formed to your vehicle that change any
of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or death.
You are responsible for injuries related
to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Load­ing” when mounting accessories.

● Never install accessories or carry

cargo that would impair the perfor­mance of your scooter. Carefully
inspect the accessory before using
it to make sure that it does not in
any way reduce ground clearance
or cornering clearance, limit sus­pension travel, steering travel or
control operation, or obscure lights
or reflectors.

• Accessories fitted to the handle­bar or the front fork area can
create instability due to improper
weight distribution or aerody­namic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.

1-4

• Bulky or large accessories may
seriously affect the stability of
the scooter due to aerodynamic
effects. Wind may attempt to lift
the scooter, or the scooter may
become unstable in cross
winds. These accessories may
also cause instability when
passing or being passed by lar­ge vehicles.

• Certain accessories can dis­place the operator from his or
her normal riding position. This
improper position limits the free­dom of movement of the opera­tor and may limit control ability,
therefore, such accessories are
not recommended.

● Use caution when adding electri-

cal accessories. If electrical acces­sories exceed the capacity of the
scooter’s electrical system, an
electric failure could result, which
could cause a dangerous loss of
lights or engine power.

1

SAFETY INFORMATION

Aftermarket Tires and Rims

The tires and rims that came with your
scooter were designed to match the

1

performance capabilities and to provide
the best combination of handling, brak­ing, and comfort. Other tires, rims, siz­es, and combinations may not be
appropriate. Refer to page 6-15 for tire
specifications and more information on
replacing your tires.

Transporting the Scooter

Be sure to observe following instruc­tions before transporting the scooter in
another vehicle.

● Remove all loose items from the

scooter.

● Point the front wheel straight

ahead on the trailer or in the truck
bed, and choke it in a rail to pre­vent movement.

● Secure the scooter with tie-downs

or suitable straps that are attached
to solid parts of the scooter, such
as the frame or upper front fork tri­ple clamp (and not, for example, to
rubber-mounted handlebars or
turn signals, or parts that could
break). Choose the location for the

straps carefully so the straps will
not rub against painted surfaces
during transport.

● The suspension should be com-

pressed somewhat by the tie­downs, if possible, so that the
scooter will not bounce excessive­ly during transport.

1-5

EAU10373

Further safe-riding points

● Be sure to signal clearly when

making turns.

● Braking can be extremely difficult

on a wet road. Avoid hard braking,
because the scooter could slide.
Apply the brakes slowly when
stopping on a wet surface.

● Slow down as you approach a cor-

ner or turn. Once you have com­pleted a turn, accelerate slowly.

● Be careful when passing parked

cars. A driver might not see you
and open a door in your path.

● Railroad crossings, streetcar rails,

iron plates on road construction
sites, and manhole covers be­come extremely slippery when
wet. Slow down and cross them
with caution. Keep the scooter up­right, otherwise it could slide out
from under you.

● The brake pads could get wet

when you wash the scooter. After
washing the scooter, check the
brakes before riding.

● Always wear a helmet, gloves,

trousers (tapered around the cuff
and ankle so they do not flap), and
a bright colored jacket.

● Do not carry too much luggage on

the scooter. An overloaded scoot­er is unstable. Use a strong cord to
secure any luggage to the carrier
(if equipped). A loose load will af­fect the stability of the scooter and
could divert your attention from the
road. (See page 1-3.)

SAFETY INFORMATION

1

1-6

DESCRIPTION

1

2

8

7

6

345

Left view

2

1. Luggage hook (page 3-10)

2. Front storage compartment (page 3-9)

3. Rear storage compartment (page 3-9)

4. Seat (page 3-7)

5. Rear turn signal light (page 6-27)

6. Tail/brake light (page 6-27)

7. Air filter element (page 6-13)

8. V-belt case air filter element (page 6-13)

EAU10410

2-1

Right view

123 4

5

6

DESCRIPTION

EAU10420

2

1. Owner’s tool kit (page 6-2)

2. Battery (page 6-23)

3. Main fuse (page 6-25)

4. Front brake fluid reservoir (page 6-19)

5. Headlight (page 6-26)

6. Front turn signal light (page 6-28)

2-2

DESCRIPTION

8

6

2457

3

1

Controls and instruments

2

EAU10430

1. Fuel tank cap (page 3-5)

2. Left handlebar switches (page 3-3)

3. Rear brake lever (page 3-4)

4. Speedometer (page 3-3)

5. Fuel meter (page 3-3)

6. Front brake lever (page 3-4)

7. Right handlebar switch (page 3-3)

8. Main switch/steering lock (page 3-1)

2-3

INSTRUMENT AND CONTROL FUNCTIONS

TIP

WARNING

WARNING

ZAUU0679

OFF

LOCK

ON

1

2

Main switch/steering lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering, to open the
seat, and to open the fuel tank cap. The
various main switch positions are de­scribed below.

The main switch is equipped with a key­hole cover. (See page 3-2 for keyhole
cover opening and closing proce­dures.)

EAUU1030

ON

EAU10650

All electrical systems are supplied with
power, the headlight, meter lighting,
taillight and auxiliary light come on, and
the engine can be started. The key can­not be removed.

EAU10661

OFF

All electrical systems are off. The key
can be removed.

EWA10061

Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.

EAUU1041

LOCK

The steering is locked, and all electrical
systems are off. The key can be re­moved.

3-1

To lock the steering

3

1. Push.

2. Turn.

1. Turn the handlebars all the way to
the left.

2. Push the key in from the “OFF” po­sition, and then turn it to “LOCK”
while still pushing it.

3. Remove the key.

To unlock the steering
Push the key in, and then turn it to
“OFF” while still pushing it.

EWAU0041

● Never turn the key to “OFF” or

“LOCK” while the vehicle is
moving; otherwise, the electri-

INSTRUMENT AND CONTROL FUNCTIONS

3

12

123

cal systems will be switched off,
which may result in loss of con­trol or an accident.

● If the vehicle turns over, and af-

ter placing it upright, ensure
that there is no fuel leakage. If
fuel is leaking, have a Yamaha

3

dealer check the vehicle.

EAU55950

Keyhole cover

1. Keyhole cover receptacle

2. “SHUT” button

3. Key bow

To open the keyhole cover
Insert the key bow into the keyhole cov­er receptacle as shown, and then turn
the key to “OPEN” to open the cover.

To close the keyhole cover
Press the “SHUT” button to close the
keyhole cover.

EAU11006

Indicator lights and warning light

1. Engine trouble warning light “ ”

2. High beam indicator light “ ”

3. Turn signal indicator light “ ”

EAU11020

Turn signal indicator light “ ”

This indicator light flashes when the
turn signal switch is pushed to the left or
right.

EAU11080

High beam indicator light “ ”

This indicator light comes on when the
high beam of the headlight is switched
on.

3-2

INSTRUMENT AND CONTROL FUNCTIONS

12 3

3 2 1

ZAUU0684

1

Engine trouble warning light “ ”

EAU11484

This warning light comes on if a prob­lem is detected in the electrical circuit
monitoring the engine. If this occurs,
have a Yamaha dealer check the self­diagnosis system.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”. The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.

EAUU0080

Speedometer unit

1. Speedometer

2. Odometer

3. Fuel meter

The speedometer unit is equipped with
a speedometer, an odometer and a fuel
meter. The speedometer shows riding
speed. The odometer shows the total
distance traveled. The fuel meter indi­cates the amount of fuel in the fuel tank.

EAU1234C

Handlebar switches

Left

3

1. Dimmer switch “ / ”

2. Turn signal switch “ / ”

3. Horn switch “ ”

Right

1. Start switch “ ”

3-3

INSTRUMENT AND CONTROL FUNCTIONS

1

Dimmer switch “ / ”

Set this switch to “ ” for the high
beam and to “ ” for the low beam.

Turn signal switch “ / ”

To signal a right-hand turn, push this
switch to “ ”. To signal a left-hand

3

turn, push this switch to “ ”. When re­leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re­turned to the center position.

Horn switch “ ”

Press this switch to sound the horn.

Start switch “ ”

Push this switch while applying the
front or rear brake to crank the engine
with the starter. See page 5-1 for start­ing instructions prior to starting the en­gine.

EAU12400

EAU12460

EAU12500

EAUM1132

EAU12901

Front brake lever

1. Front brake lever

The front brake lever is located on the
right side of the handlebar. To apply the
front brake, pull this lever toward the
throttle grip.

EAU12951

Rear brake lever

1

ZAUU0687

1. Rear brake lever

The rear brake lever is located on the
left side of the handlebar. To apply the
rear brake, pull this lever toward the
handlebar grip.

3-4

INSTRUMENT AND CONTROL FUNCTIONS

WARNING

WARNING

WARNING

ZAUU0688

1

1

2

EAUU1161

Fuel tank cap

1. Fuel tank cap

To open the fuel tank cap

Insert the key into the main switch and,
while pushing the key in, turn it to “ ”.
The lock will be released and the fuel
tank cap can be removed.

To install the fuel tank cap

Push the fuel tank cap down into its po­sition. A clicking sound can be heard
when the fuel tank cap is locked.

Make sure that the fuel tank cap is
properly closed and locked before
riding. Leaking fuel is a fire hazard.

EWA10121

EAU13212

Fuel

Make sure there is sufficient gasoline in
the tank.

EWA10881

Gasoline and gasoline vapors are
extremely flammable. To avoid fires
and explosions and to reduce the
risk of injury when refueling, follow
these instructions.

1. Before refueling, turn off the en­gine and be sure that no one is sit­ting on the vehicle. Never refuel
while smoking, or while in the vi­cinity of sparks, open flames, or
other sources of ignition such as
the pilot lights of water heaters and
clothes dryers.

2. Do not overfill the fuel tank. Stop
filling when the fuel reaches the
bottom of the filler tube. Because
fuel expands when it heats up,
heat from the engine or the sun
can cause fuel to spill out of the
fuel tank.

3-5

1. Fuel tank filler tube

2. Maximum fuel level

3. Wipe up any spilled fuel immedi­ately. NOTICE: Immediately wipe

off spilled fuel with a clean, dry,
soft cloth, since fuel may deteri­orate painted surfaces or plastic

[ECA10071]

parts.

4. Be sure to securely close the fuel
tank cap.

EWA15151

Gasoline is poisonous and can cau­se injury or death. Handle gasoline
with care. Never siphon gasoline by
mouth. If you should swallow some
gasoline or inhale a lot of gasoline
vapor, or get some gasoline in your
eyes, see your doctor immediately. If

3

INSTRUMENT AND CONTROL FUNCTIONS

NOTICE

WARNING

gasoline spills on your skin, wash
with soap and water. If gasoline
spills on your clothing, change your
clothes.

3

Recommended fuel:

Regular unleaded gasoline (Gaso­hol (E10) acceptable)

Fuel tank capacity:

4.4 L (1.16 US gal, 0.97 Imp.gal)

Use only unleaded gasoline. The use
of leaded gasoline will cause severe
damage to internal engine parts,
such as the valves and piston rings,
as well as to the exhaust system.

Your Yamaha engine has been de­signed to use regular unleaded gaso­line with a research octane number of
95 or higher. If knocking (or pinging) oc­curs, use a gasoline of a different brand
or premium unleaded fuel. Use of un­leaded fuel will extend spark plug life
and reduce maintenance costs.

EAU53011

ECA11400

Gasohol

There are two types of gasohol: gaso­hol containing ethanol and that contain­ing methanol. Gasohol containing
ethanol can be used if the ethanol con­tent does not exceed 10% (E10). Gas­ohol containing methanol is not
recommended by Yamaha because it
can cause damage to the fuel system
or vehicle performance problems.

EAU13433

Catalytic converter

This model is equipped with a catalytic
converter in the exhaust system.

EWA10862

The exhaust system is hot after op­eration. To prevent a fire hazard or
burns:

● Do not park the vehicle near

possible fire hazards such as
grass or other materials that
easily burn.

● Park the vehicle in a place

where pedestrians or children
are not likely to touch the hot
exhaust system.

● Make sure that the exhaust sys-

tem has cooled down before do­ing any maintenance work.

● Do not allow the engine to idle

more than a few minutes. Long
idling can cause a build-up of
heat.

3-6

INSTRUMENT AND CONTROL FUNCTIONS

NOTICE

TIP

ZAUU0690

1

ZAUU0691

1

ZAUU0692

1

ECA10701

Use only unleaded gasoline. The use
of leaded gasoline will cause unre­pairable damage to the catalytic
converter.

EAUU1173

Seat

To open the seat

1. Place the motorcycle on the cen­terstand.

2. Turn the key to “SEAT”.

Do not push inward when turning the
key.

To open the seat from the “OFF”
position

1. Seat open (in “OFF” position)

From the “OFF” position, turn the
key counterclockwise to “SEAT”.

To open the seat from the “LOCK”
position

3

1. Seat open (in “LOCK” position)

From the “LOCK” position, turn the
key counterclockwise to “SEAT”.

To open the seat from the “ON” po­sition

1. Seat open (in “ON” position)

3-7