This supplementary manual explains mainly the functionality that was changed
or added in version 2.0 of the M7CL firmware. Please read this in conjunction
with the M7CL V1.1 supplementary manual and the M7CL Owner’s manual.
You can download the most recent version of the Help file from the Yamaha
website.
http://www.yamahaproaudio.com/
■
Main changes
■
Input channel operations
•Now the top panel faders can also be used to adjust the
send levels from input channels to MATRIX buses
(p. 3).
• In SENDS ON FADER mode, the send-destination
MATRIX bus can now be selected by pressing the
[MATRIX] navigation key and then pressing a [SEL]
key in the Centralogic section (p. 3).
• The various channel parameters can now be saved
together in internal memory as channel library data
(p. 3).
■
Output channel operations
• The various channel parameters can now be saved
together in internal memory as channel library data
(p. 3).
Scene memory
•You can now use the Global Paste function to easily
modify parameters across multiple scenes (p. 6).
• Recall Safe for the attenuator can now be selected independently of EQ (p. 7).
■
Monitor/Cue
•A monitor fader has been added to the monitor output
level control, allowing you to use the STEREO MASTER fader / MONO MASTER fader to control the level
(p. 5).
■
User settings
• M7CL V2 Editor now allows you to make the same
user-defined key settings as on the console itself (p. 7).
• Additional functions are now available for assignment
to the user-defined keys (p. 7).
•Regarding compatibility of data you create (p. 7).
■
Input/output patching
•You can now select POST ON (immediately after the
fader and [ON] key) as the insert or direct output position (p. 4).
• When specifying or clearing a GEQ insertion, insert
will now be turned on/off automatically (p. 4).
■
EQ and Dynamics
• The minimum level for an input channel’s GATE
threshold level is now -72 dB (p. 4).
■
Grouping and linking
• When you enable channel link, HA gain and fader operations will now be linked while maintaining the level
difference between channels (p. 5).
2
Page 3
Using the faders to adjust the
send levels to the MATRIX buses
(MATRIX ON FADER mode)
You can now use the top panel faders to adjust the send
levels from input channels not only to MIX buses but also
to MATRIX buses.
In SENDS ON FADER mode, you can now use the MIX/
MTRX ON FADER button to switch between the MIX
buses and MATRIX buses as the send destinations.
[When MIX ON FADER mode is ON]
1
2
[When MATRIX ON FADER mode is ON]
Input/output channel library support
Until now, EQ and dynamics were managed as individual
libraries, but now the channel parameters (including HA
settings) can be managed together in units of channels as
channel library data, and stored, recalled, or cleared from
internal memory.
You can recall 200 different settings each from the input
channel library and the output channel library. For both
input and output libraries, only 000 (Initial Data) is a readonly preset.
The basic operations are the same for input channels and
output channels.
Using the channel library
Use the [SEL] keys to select the channel
1
whose settings you want to manage.
Press an encoder of the SELECTED CHAN-
2
NEL section to access the SELECTED
CHANNEL VIEW screen.
1
2
1
MIX/MTRX ON FADER select button
Each time you press this button, you’ll switch between MIX
ON FADER mode and MATRIX ON FADER mode.
B
MIX/MATRIX bus select button
Use these buttons to switch the send destination MIX bus or
MATRIX bus. The buttons will be joined if two buses are set
to stereo.
Using the Centralogic section’s
[SEL] keys to select a MATRIX bus
In SENDS ON FADER mode, the send-destination
MATRIX bus can now be selected by pressing the
[MATRIX] navigation key and then pressing a [SEL] key
in the Centralogic section.
Press the LIBRARY tool button to access
3
the INPUT CHANNEL LIBRARY window /
OUTPUT CHANNEL LIBRARY window.
The library window contains the following items.
[INPUT CHANNEL LIBRARY]
3
456
3
Page 4
[OUTPUT CHANNEL LIBRARY]
1
3
456
CURRENT TYPE
1
(OUTPUT CHANNEL LIBRARY only)
Displays the type of channel selected by the [SEL] key.
B
Library type (OUTPUT CHANNEL LIBRARY only)
Displays the type of channel for the library item in the list.
2
NOTE
• If you recall to a channel that is channel-linked, linking will be
cancelled for the recalled channel.
POST ON added as an insert /
direct out position
You can now select POST ON (immediately after the
fader and [ON] key) as the insert or direct output position
for input/output channels.
NOTE
•For the output channel library, if the type of channel selected
by the [SEL] key differs from the type of channel selected in
the list, an indication of “CONFLICT” is shown at the right of
CURRENT TYPE. Recall can be executed even if the “CONFLICT” indication is shown, but since the constituent parameters will be different, parameters that do not exist in the library
will be set to their default values.
Library list
C
Selects the library item that will be the object of the operation. The selected library item will move to the center, and
will be highlighted.
D
STORE button
Stores the settings of the currently selected channel into the
selected location of the list. When you press this button, the
LIBRARY STORE window will appear, allowing you to
name the settings.
E
RECALL button
Recalls the settings shown in the list into the currently
selected channel.
F
CLEAR button
Clears (deletes) the library item selected in the list. When you
press this button, a dialog box will ask you to confirm the
Clear operation.
Insert is automatically turned
on/off when GEQ insertion is enabled
or cancelled
If a rack in which a GEQ is mounted is specified as the
insert-out or insert-in, the other patch point will automatically be assigned to the same rack. At the same time,
insertion is now automatically turned on. Additionally, if
you defeat the insert-out or insert-in of a rack in which a
GEQ is mounted, the other patch point will automatically
be defeated, and insertion will automatically be turned off.
Changed minimum value of the
GATE threshold level
The minimum threshold level for an input channel GATE
is now -72 dB.
By turning any one of the multifunction
4
encoders, move the highlighted line in the
list to select the library number you want to
store, recall, or clear.
Press the STORE button, RECALL button,
5
or CLEAR button.
The rest of the steps are the same as for other libraries.
4
Page 5
Channel link level differences maintained,
and can temporarily defeated
When you enable channel link, HA gain and fader operations will now be linked while maintaining the level difference between channels of the link group.
●
Temporarily defeating link
For parameters (HA gain and fader) that preserve their relative level differences when linked, you can temporarily
defeat linking for all linked channels, for example when
you need to adjust the level balance between channels of a
link group. Hold down the [SEL] key of the channel
whose balance you want to adjust, and operate the parameter that you want to modify. While you’re holding down
the [SEL] key, the HA gain and fader will not be linked.
(However, temporary unlinking is not possible during the
fade that occurs when a scene memory is recalled.)
Using the STEREO/MONO MASTER fader to
adjust the monitor output level
A monitor fader has been added to the monitor output
level control, allowing you to use the STEREO MASTER
fader / MONO MASTER fader to control the level.
You can now also use the [ON] key of the MONO channel
and STEREO channel to turn the monitor output on/off.
A new MONITOR FADER field has been added in the
MONITOR screen and the MONITOR popup window.
[MONITOR popup window]
21
MONITOR FADER LEVEL
1
Indicates the current monitor fader.
FADER ASSIGN MODE button
B
Each time you press this button of the MONITOR popup
window, you will alternate between NONE → STEREO →
MONO → NONE.
If you select STEREO, you’ll be able to use the top panel
STEREO MASTER fader to control the monitor fader. You
can also use the [ON] key located above the STEREO MASTER fader to turn the monitor output on/off.
If you select MONO, you’ll be able to use the top panel
MONO MASTER fader to control the monitor fader. You can
also use the [ON] key located above the MONO MASTER
fader to turn the monitor output on/off.
[MONITOR screen]
1
NOTE
• The monitor fader and MONITOR LEVEL knob are located in
series. The top panel MONITOR LEVEL knob is still valid
even when you’re using this function to adjust the monitor
level. The monitor signal will not be output if the MONITOR
LEVEL knob is set to the minimum position.
• The [ON] key of the STEREO channel or MONO channel will
operate in tandem with the MONITOR screen’s OUTPUT button. The PHONES OUT jack will always output the monitor
signal, regardless of whether the OUTPUT button is on or off.
•You can also assign a user-definable key to switch the
FADER ASSIGN MODE setting (p. 7).
• The MONITOR button of the function access area is shown in
red for STEREO or in yellow for MONO, depending on the
FADER ASSIGN MODE setting.
5
Page 6
Using the Global Paste function to change
multiple scenes in a single operation
“Global Paste” is a function that lets you copy and paste
settings of the desired channel or parameter from the current scene to scene data in memory (multiple selections
are allowed). This is a convenient way in which changes to
the current scene can be applied to multiple scenes that
have already been stored.
Using the Global Paste function
NOTE
• The Global Paste function can be used only by users for whom
SCENE LIST STORE/SORT is turned on in their user level settings.
In the function access area, press the
1
SCENE field to access the SCENE LIST window.
In the lower right of the SCENE LIST win-
2
dow, press the GLOBAL PASTE button to
access the GLOBAL PASTE window.
In this screen you can select the copy-source channels/
parameters and specify the paste-destination scene
data.
ALL
HA
ATT
EQ
DYNA1
DYNA2
MIX ON/
SEND
MTRX ON/
SEND
FADER
CH ON
OUTPUT tab
●
All input channel parameters (except
INPUT PATCH and INPUT NAME)
Settings for the head amp assigned to the
corresponding input channel
Attenuator
EQ settings
Dynamics 1 settings (including KEY IN
SOURCE and KEY IN FILTER)
Dynamics 2 settings (including KEY IN
SOURCE)
Send to MIX bus on/off, send level, pan,
and PRE/POST
Send to MATRIX bus on/off, send level,
pan, and PRE/POST
Fader level
[ON] key on/off status
Select the output channel in the upper left, and its
parameters in the lower left.
You can select the following parameters.
ALL
ATT
EQ
DYNA1
MATRIX ON
MATRIX
SEND
FADER
CH ON
WITH MIX
SEND
WITH MATRIX
SEND
All output channel parameters (except
OUTPUT PATCH and OUTPUT NAME)
Attenuator
EQ settings
Dynamics 1 settings (including KEY IN
SOURCE and KEY IN FILTER)
Send to MATRIX bus on/off (only for MIX
and STEREO/MONO channels)
Send level to MATRIX bus, pan, PRE/
POST (only for MIX and STEREO/MONO
channels)
Fader level
[ON] key on/off status
Selects whether the send level sent from
input channels to the selected MIX bus
will be included in the pasted data.
Selects whether the send level sent from
input channels to the selected MATRIX
bus will be included in the pasted data.
Use the tabs to select the items to be cop-
3
ied from the following choices.
INPUT
OUTPUT
RACK
PATCH/NAME
Select the copy-source channels and
4
Input channels and parameters
Output channels and parameters
RACK 1–8
Input/output patching and channel names
parameters.
The display will depend on the tab you selected.
You cannot select different parameters for each chan-
nel.
Use the top panel [SEL] keys to select a channel.
INPUT tab
●
Select the input channel in the upper left, and its
parameters in the lower left.
You can select the following parameters.
●
RACK tab
Select RACK 1–8.
●
PATCH/NAME tab
Select from INPUT PATCH, INPUT NAME, OUTPUT PATCH, and OUTPUT NAME.
In the DESTINATION SCENE area, select the
5
range of paste-destination scenes.
The data will be pasted to all scenes in the range
between FROM and TO. Use multi-function encoder 7
to select FROM, and multi-function encoder 8 to
select TO.
Press the PASTE button.
6
The selected items of the current scene will be pasted
to the scene(s) in memory.
A progress bar will be shown while the Paste operation is being performed.
The STOP button is shown while the Paste function is
being executed; you can stop by pressing this button.
In this case, the Paste function will have been partially
executed, and the data cannot be restored to its previous state.
6
Page 7
Recall Safe settings made independently
for the attenuator
Functions that can be assigned to
user-defined keys
Recall Safe for the attenuator can now be selected independently of EQ.
In addition, the stereo, LINK, RECALL SAFE, and USER
LEVEL behavior of other mixing parameters has also
been changed. For details, refer to the "Mixing parameter
operation applicability" on the back of the included block
diagram.
Assigning user-defined keys from
M7CL V2 Editor
M7CL V2 Editor now allows you to make the same userdefined key settings as on the console itself. For details on
how to make these settings, refer to the M7CL V2 Editor
Owner’s manual.
Function
MONITOR ON
MASTER
(FADER
ASSIGN
MODE)
SENDS
ON
FADER
M7CL
EDITOR
CONTROL
HOMESELECTED
PARAME-
TER 1
STEREO
MASTER
MONO
MASTER
MATRIX
1-8
MIX ON
FADER
MATRIX ON
FADER
SENDS ON
FADER
LIBRARYINPUT CH Opens the M7CL V2 Edi-
CH VIEW
OVERVIEW
MOMENTA RY
PARAME-
TER 2
LATCHThe key will switch
UNLATCHThe STEREO MASTER
LATCHThe key will switch
UNLATCHThe MONO MASTER
–
–
–
–
OUTPUT CHOpens the M7CL V2 Edi-
–
–
–
Explanation
whether the STEREO
MASTER fader will be
used to control the monitor level
fader will be used to control the monitor level
while the key is held
down
whether the MONO
MASTER fader will be
used to control the monitor level
fader will be used to control the monitor level
while the key is held
down
Switches the MATRIX
ON FADER function on/
off for the selected
MATRIX
Switches the MIX ON
FADER function on/off
Switches the MATRIX
ON FADER function on/
off
Switches the SENDS ON
FADER function on/off
tor’s Library window INPUT CH tab
tor’s Library window OUTPUT CH tab
Displays the SELECTED
CHANNEL VIEW screen
Displays the OVERVIEW
screen
Each press of the key will
alternately display the
SELECTED CHANNEL
VIEW screen and the
OVERVIEW screen
Compatibility of created data
Data created with firmware 2.0 (scenes, library data, setup
data, etc.) cannot be loaded into an M7CL console that is
using firmware V1 (any version prior to V2.0). However,
data created on an M7CL with firmware V1 can be loaded
into an M7CL that is using firmware V2.0.
7
Page 8
EN
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products
should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance
with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or
dealer and ask for the correct method of disposal.
DE
Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte
Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden.
In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC, bringen Sie alte Geräte bitte zur
fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.
Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen und verhindern mögliche
negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten.
Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte, kontaktieren Sie bitte Ihre örtliche Stadtoder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.
[Information für geschäftliche Anwender in der Europäischen Union]
Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere Informationen.
[Entsorgungsinformation für Länder außerhalb der Europäischen Union]
Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie
bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.
Page 9
FR
Information concernant la Collecte et le Traitement des déchets
d’équipements électriques et électroniques.
Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.
Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques,
veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives
2002/96/EC.
En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors
d’un traitement inapproprié des déchets.
Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques,
veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits.
[Pour les professionnels dans l’Union Européenne]
Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur
ou fournisseur pour plus d’informations.
[Information sur le traitement dans d’autres pays en dehors de l’Union Européenne]
Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements
électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement
appropriée.
ES
Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo
Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes.
Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC.
Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto
negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.
Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio
de gestión de residuos o el punto de venta en el cual usted adquirió los artículos.
[Para usuarios de negocios en la Unión Europea]
Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor
información.
[Información sobre la Disposición en otros países fuera de la Unión Europea]
Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición.
IT
Informazioni per gli utenti sulla raccolta e lo smaltimento di vecchia attrezzatura
Questo simbolo sui prodotti, sull’imballaggio, e/o sui documenti che li accompagnano significa che i prodotti elettriche e elettroniche non dovrebbero essere mischiati con i rifiuti domestici generici.
Per il trattamento, recupero e riciclaggio appropriati di vecchi prodotti, li porti, prego, ai punti di raccolta appropriati, in accordo
con la Sua legislazione nazionale e le direttive 2002/96/CE.
Smaltendo correttamente questi prodotti, Lei aiuterà a salvare risorse preziose e a prevenire alcuni potenziali effetti negativi
sulla salute umana e l’ambiente, che altrimenti potrebbero sorgere dal trattamento improprio dei rifiuti.
Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti, prego contatti la Sua amministrazione comunale locale,
il Suo servizio di smaltimento dei rifiuti o il punto vendita dove Lei ha acquistato gli articoli.
[Per utenti imprenditori dell’Unione europea]
Se Lei desidera disfarsi di attrezzatura elettrica ed elettronica, prego contatti il Suo rivenditore o fornitore per ulteriori informazioni.
[Informazioni sullo smaltimento negli altri Paesi al di fuori dell’Unione europea]
Questo simbolo è validi solamente nell’Unione europea. Se Lei desidera disfarsi di questi articoli, prego contatti le Sue autorità
locali o il rivenditore e richieda la corretta modalità di smaltimento.
Page 10
■ M7CL-48/M7CL-32 V2.0 Block Diagram
+48V MASTER
+48V
[TALKBACK
INPUT]
[INPUT]
[1-32 {48}]
[ST IN]
[1L-4R]
[SLOT]
MIX OUT
1-16
MATRIX OUT
1-8
STEREO OUT
L,R,MONO (C)
CH
INSERT OUT
1-32 {48}
MIX
INSERT OUT
1-16
STEREO
INSERT OUT
L,R,MONO (C)
MATRIX
INSERT OUT
1-8
TALKBACK
INPUT
INPUT
ST IN L
ST IN R
RACK
IN
PATCH
RACK1 IN
A (L ) / B (R)
RACK2 IN
A (L ) / B (R)
RACK3 IN
A (L) / B (R)
RACK4 IN
A (L) / B (R)
RACK5 IN
A (L) / B (R)
RACK6 IN
A (L) / B (R)
RACK7 IN
A (L) / B (R)
RACK8 IN
A (L) / B (R)
1
1
1
1
SLOT1
SLOT2
SLOT3
ON
+48V
2
3
TALKBACK
+48V
2
3
+48V
2
3
+48V
2
3
SLOTIN
SLOTIN SLOTIN
METER METER METER
16
16
16
RACK
METER
RACK IN
31BandGEQ
RACK IN A
METER
RACK IN B
METER
Flex15GEQ
RACK2 (same as RACK1)
RACK3 (same as RACK1)
RACK4 (same as RACK1)
METERMETER
RACK IN
31BandGEQ
RACK IN ARACK OUT A
METER
RACK IN B
METER
Flex15GEQ
METER
RACK IN L
RACK IN R
METER
EFFECT
RACK6 (same as RACK5)
RACK7 (same as RACK5)
RACK8 (same as RACK5)
AD
GAIN
AD
AD
AD
RACK1
RACK5
GAIN/TRIM
GAIN/TRIM
GAIN/TRIM
To CASCADE IN
SELECT
METER
METER
METER
METER
METER
METER
METER
EFFECT CUE
RACK OUT
RACK OUT A
RACK OUT B
RACK OUT
RACK OUT B
RACK OUT L
RACK OUT R
HA
METER
HA
METER
HA
METER
HA
METER
To MONITOR
SELECT
TALKBACK
INPUT TB
INPUT 1-32 {48}
INPUT
PATCH
INPUT
1-32 {48}
ST IN
1L-4R
SLOT1 1-16
SLOT2 1-16
SLOT3 1-16
RACK1 OUT
A (L) / B (R)
RACK2 OUT
A (L) / B (R)
RACK3 OUT
A (L) / B (R)
RACK4 OUT
A (L) / B (R)
RACK5 OUT
A (L) / B (R)
RACK6 OUT
A (L) / B (R)
RACK7 OUT
A (L) / B (R)
RACK8 OUT
A (L) / B (R)
INSERT
IN
PATCH
SLOT1 1-16
SLOT2 1-16
SLOT3 1-16
RACK1 OUT
A (L) / B (R)
RACK2 OUT
A (L) / B (R)
RACK3 OUT
A (L) / B (R)
RACK4 OUT
A (L) / B (R)
RACK5 OUT
A(L) / B (R)
RACK6 OUT
A (L) / B (R)
RACK7 OUT
A (L) / B (R)
RACK8 OUT
A (L) / B (R)
INPUT
SELECT
CH 1-32 {48}
To RACKIN PATCH
32
{48}
To OUTPUT PATCH
CH
INSERT OUT 1-32 {48}
CH
INSERT IN 1-32 {48}
PRE HPF
METER
CH[1-8,9-16,17-24,25-32,33-40,41-48]POST EQ{48}
(PRE FADER)PFL / (POST ON)AFL/POST PAN L
(PRE FADER)PFL / (POST ON)AFL/POST PAN R
STCH 1L-4R
PRE HPF
METER
8
(PRE FADER)PFL/(POST ON)AFL / POST PAN L
(PRE FADER)PFL/(POST ON)AFL / POST PAN R
CH INSERT IN 1-32 {48}
32 {48}
MIX INSERT IN 1-16
16
STEREO INSERT IN L,R,MONO (C)
3
MATRIX INSERT IN 1-8
8
To CHINSERT IN
To MIX INSERT IN
To STEREO INSERT IN
To MATRIX INSERT IN
OUTPUTS
STEREO CASCADE OUT L,R,MONO (C)
MIX CASCADE OUT 1-16
MATRIX CASCADE OUT 1-8
CUE CASCADE OUT L,R
DIRECT OUT 1-32 {48}
STEREO OUT L,R,MONO (C)
MONITOR OUT L,R, MONO (C)
STEREO INSERT OUT L,R,MONO (C)
STEREO OUT L,R,MONO (C)
MONITOR OUT L,R,MONO (C)
STEEREO OUT L,R,MONO (C)
MONITOR OUT L,R,MONO (C)
MIX OUT 1-16
MATRIX OUT 1-8
CH INSERT OUT 1-32 {48}
MIX INSERT OUT 1-16
MATRIX INSERT OUT 1-8
DIRECT OUT 1-32 {48}
MIX OUT 1-16
MATRIX OUT 1-8
MIX OUT 1-16
MATRIX OUT 1-8
ON
INSERT POINT
POST ON INSERT OUT
PRE FADER INSERT OUT
PRE EQ INSERT OUT
PRE EQEQ OUT
METERMETERMETERMETER
INSERT
HPF
PRE EQ
INSERT OUT
CH[1-8,9-16,17-24,25-32]POST EQ {32}
HPF
PRE HPFPRE EQ POST EQ
4BAND
ATT
PRE EQPRE HPF
Self PRE EQ
Self POST EQ
MIX13-16 OUT
PRE EQ
METER
4BAND
ATT
Self PRE EQ
Self POST EQ
MIX13-16 OUT
STCH 1L-4R POST EQ
OUTPUT
PATCH
OUTPUT
PATCH
OUTPUT
PATCH
EQ
POST EQ
EQ
PRE HPF / PRE EQ / PRE FADER / POST ON
DYNA1OUTPRE FADER
GR METER GR METER
GATE
COMP
DUCK
COMPAND
EXPAND
DE-ESSER
COMP
KEYIN CUE
Keyin Filter
Keyin
To MIX
FIXED
To MIX
FIXED
STEREO
To MIX
PRE EQ / PRE FADER / POST ON
VARI
To MIX
PRE EQ / PRE FADER / POST ON
VARI
STEREO
To MATRIX
PRE EQ / PRE FADER / POST ON
VARI
To MATRIX
PRE EQ / PRE FADER / POST ON
VARI
STEREO
ON
ON
DYNA 1OUT
EQ OUT
METER
METER
GR METER
GR METER
GATE
COMP
DUCK
COMPAND
EXPAND
DE-ESSER
COMP
KEYIN CUE
Keyin Filter
Keyin
To MIX
FIXED
To MIX
FIXED
STEREO
To MIX
PRE EQ / PRE FADER / POST ON
VARI
To MIX
PRE EQ / PRE FADER / POST ON
VARI
STEREO
To MATRIX
PRE EQ / PRE FADER / POST ON
VARI
To MATRIX
PRE EQ / PRE FADER / POST ON
VARI
STEREO
ON
ON
PHONES OUT LR
METER
DELAY
(MAX:600ms)
(MAX:600ms)
(MAX:600ms)
(MAX:600ms)
(MAX:600ms)
DELAY
DELAY
DELAY
DELAY
METER
METER
METER
METER
DYNA2OUT
POST ON
POST PAN L
POST PAN R
DYNA 2OUT
METER
POST PAN L
POST PAN R
SLOT1OUT
SLOT2OUT
SLOT3OUT
OMINI OUT
2TR OUT
METER
INSERT
PRE FADER
INSERT OUT
PRE FADER
METER
POST ON
KEYIN CUE
EFFECT CUE
ATT TRIM
ATT
ATT TRIM
OSCILLATOR
Sine Wave
Pink Noise
Burst Noise
LEVEL/
DCA1-8
ON
PRE FADER
POST ON
INSERT OUT
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
LEVEL/
DCA 1-8
ON
PRE FADER
DA
2
16
16
16
TRIM
16
2
CASCADE IN
HPF
ON
LEVEL
PAN
POST ON
LR MONO
METER
LCR
INSERT
POST ON
PAN LINK
LEVEL
LEVEL
LEVEL
PAN
LEVEL
LEVEL
LEVEL
PAN
METER
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
POST ON
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
LEVEL
BAL
LR MONO
LCR
PAN LINK
BAL
BAL
POST ON
KEYIN CH1-32 {48}
KEYIN ST IN1L-4R
RACK 5-8 OUT L / R
PHONES LEVEL
SLOT1
SLOT2
SLOT3
DA
DIT
2
3
AES / EBU
SLOT 1 1-16
SLOT 2 1-16
SLOT 3 1-16
LEVEL
LPF
DIRECT OUT 1-32 {48}
POST PAN L
POST PAN R
TO MONO TO ST
TO LCR
CSR
MIX1,3...15
MIX2,4...16
MATRIX1,3...7
MATRIX2,4...8
CUE L
CUE R
POST PAN L
POST PAN R
TO MONO TO ST
TO LCR
CSR
MIX 1,3... 15
MIX 2,4... 16
MATRIX1,3...7
MATRIX2,4...8
CUE L
CUE R
KEYIN CUE
SELECT
EFFECT CUE
SELECT
Tip
Ring
[PHONES]
Sleeve
[SLOT]
1
[OMNI OUT] (1-16)
[2TR OUT DIGITAL]
CASCADE
IN
SELECT
OSC
METER
To OUTPUT PATCH
PAN MODE
PAN MODE
ON
ST L
MONO (C)
ST R
ST L
MONO (C)
ST R
ON
ON
ST IN1 L,R
ST IN2 L,R
ST IN3 L,R
ST IN4 L,R
STEREO OUT L,R
STEREO OUT MONO (C)
STEREO OUT L,C,R
STEREO OUT
STEREO OUT
MATRIX OUT1-8
MIX
···
1516
1 2
ST IN1 L,R
ST IN2 L,R
ST IN3 L,R
ST IN4 L,R
L,R
MONO (C)
MIX OUT1-16
M
O
N
ST
MATRIX CUE
O
···
1 2 7 8
L R (C)L R
DEFINE
MIX
(MAX : 8ch)
CASCADE OUT
MIX 1-16
To RACKIN PATCH
To OUTPUT PATCH
INSERT OUT 1-16
INSERT IN 1-16
MATRIX1,3...7
MATRIX2,4...8
ST L
MONO (C)
ST R
STEREO L,R,MONO(C)
To RACKIN PATCH
To OUTPUT PACH
INSERT OUT L,R,MONO (C)
INSERT IN L,R,MONO (C)
MATRIX1,3...7
MATRIX2,4...8
MATRIX 1-8
To RACKIN PATCH
To OUTPUT PATCH
INSERT OUT 1-8
INSERT IN 1-8
CUE TRIM
(INPUT / OUTPUT / DCA)
CUE L
CUE R
MONITOR L
MONITOR R
MONITOR MONO (C)
MONITOR SELECT
MIX CASCADE OUT 1-16
STEREO CASCADE OUT L,R,MONO (C)
MATRIX CASCADE OUT1-8
CUE CASCADE OUT LR
INSERT POINT
POST ON INSERT OUT
MIX
PRE FADER INSERT OUT
PRE EQ INSERT OUT
MIX
CUE ON
STEREO
STEREO
CUE ON
MATRIX
MATRIX
CUE ON
MONO
MONO
INSERT
PRE EQ
INSERT OUT
INSERT POIN
POST ON INSERT OUT
PRE FADER INSERT OUT
PRE EQ INSERT OUT
INSERT
PRE EQ
INSERT OUT
INSERT POINT
POST ON INSERT OUT
PRE FADER INSERT OUT
PRE EQ INSERT OUT
INSERT
PRE EQ
INSERT OUT
CUE L
METER
METER
CUE R
MONITOR L
METER
METER
MONITOR R
METER
MONITOR MONO (C)
LEVEL
LEVEL
LEVEL
PAN
LEVEL
LEVEL
LEVEL
PAN
PRE EQ
METER
PRE EQ
METER
PRE EQ
METER
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
EQ OUT
GR METER
COMP
4 BAND
ATT
PRE EQ
ON
ON
ON
ATT
PRE EQ POST EQ
ON
ON
ON
ATT
PRE EQ
COMPAND
EQ
EXPAND
POST EQ
Keyin
Self PRE EQ / Self POST EQ / MIX13-16 OUT/
MIX(1-8,9-16)POST EQ
(PRE FADER) PFL / (POST ON) AFL
PRE FADER / POST ON
PRE FADER / POST ON
EQ OUT
METERMETERMETER
GR METER
COMP
4BAND
COMPAND
EQ
EXPAND
Keyin
Self PRE EQ / Self POST EQ / MIX13-16 OUT /
ST (L,R,MONO (C)) POST EQ
(PRE FADER) PFL / (POST ON) AFL
PRE FADER / POST ON
PRE FADER / POST ON
EQ OUTDYNA OUT
METERMETERMETER
GR METER
COMP
4BAND
COMPAND
EQ
EXPAND
POST EQ
Keyin
Self PRE EQ / Self POST EQ / MIX13-16 OUT/
MATRIX1-8 POST EQ
(PRE FADER) PFL / (POST ON) AFL
CUE LOGICPHONES
TALKBACK ON
MONITOR DIMM ON
DYNA OUT
PRE FADER
METERMETER
METERMETER
LEVEL
INSERT
PRE FADER
INSERT OUT
To MATRIX
VARI
To MATRIX
VARI
STEREO
PAN MODE
DYNA OUT
PRE FADER
LEVEL
INSERT
PRE FADER
PRE FADER
INSERT OUT
To MATRIX
VARI
To MATRIX
VARI
STEREO
PRE FADER
LEVEL
INSERT
PRE FADER
PRE FADER
INSERT OUT
LEVEL LINK
DIMMER
MONITOR
LEVEL
MONITOR
FADER
ON
BAL
+MONO (C)
ON
TO ST
ON
ON
POST ON
INSERT
POST ON
INSERT OUT
TO MONO
TO LCR
INSERT
POST ON
INSERT OUT
INSERT
POST ON
INSERT OUT
DELAY
(MAX:600ms)
DELAY
(MAX:600ms)
DELAY
(MAX:600ms)
DELAY
(MAX:600ms)
DELAY
(MAX:600ms)
An output port delay becomes invalid by
assigning a monitor out to the output port
PAN
LR MONO
LCR
CSR
POST ON
METER
POST ON
METER
CUE ON
POST ONPRE FADER
POST ON
POST ON
MIX OUT1-16
STEREO OUT
L,R,MONO (C)
MATRIX OUT 1-8
PHONES L
PHONES R
MONITOR OUT L
MONITOR OUT R
MONITOR OUT MONO (C)
POST ON
(13-16)To KEYIN
To RACKIN PATCH
To OUTPUT PATCH
To MONITOR SELECT
To OUTPUT PATCH
To MONITOR SELECT
To OUTPUT PATCH
To MONITOR SELECT
To PHONES OUT
To PHONES OUT
To OUTPUT PATCH
To OUTPUT PATCH
To OUTPUT PATCH
Page 11
Mixing parameter operation applicability
This table indicates how the behaviors of each of the input channel and output channel parameters are affected by Stereo, Link, Recall Safe, and User Level settings.
■
Input Channels
Parameter
GainO INPUT HAINPUT HAINPUT HAO
HA
Phase
+48V
Name, Icon
On
Insert
Point
On, Level
Direct
Out
Point
Att OINPUT EQ
HPF OINPUT EQINPUT EQINPUT PROCESSINGO
EQ OINPUT EQINPUT EQINPUT PROCESSINGO
Key-In Source
Key-In FilterO
Dyna
mics1
OthersO
Key-In Source
Dyna
mics2
OthersO
OnOINPUT MIX ON
LevelO
To Mix
Pan/BalanceO
Pre/PostO
OnO
LevelO
To
Matrix
Pan/BalanceO
Pre/PostO
To Stereo/ Mono O
Pan/ Balance O
OnOINPUT ALLINPUT PROCESSINGO
LCR
CSRO
On OINPUT ONINPUT ONINPUT FADER/ONO
Fader OINPUT FADERINPUT FADERINPUT FADER/ONO
Mute AssignO
DCA AssignO
CueO
Mute Safe O
Recall Safe O
Fade Time, OnOSTOREO
Stereo
*1
CHANNEL LINK
INPUT
DYNAMICS1
INPUT
DYNAMICS1
INPUT
DYNAMICS2
INPUT MIX SEND
*2
INPUT MIX
SEND
*2
INPUT MATRIX
*3
ON
INPUT MATRIX
SEND
*3
INPUT MATRIX
*3
SEND
RECALL SAFE USER LEVEL
INPUT HAINPUT HAO
INPUT HAINPUT HAO
INPUT NAME INPUT NAMEO
INPUT ALLINPUT PROCESSINGO
INPUT ALLINPUT PROCESSINGO
INPUT ALLINPUT PROCESSINGO
INPUT ALLINPUT PROCESSINGO
INPUT ATT
INPUT DYNA1INPUT PROCESSING
INPUT DYNA1INPUT PROCESSINGO
INPUT DYNA1INPUT PROCESSINGO
INPUT DYNA2INPUT PROCESSING
INPUT DYNA2INPUT PROCESSINGO
*2
INPUT MIX ONINPUT FADER/ON
INPUT MIX SEND INPUT FADER/ON
INPUT MIX SEND INPUT FADER/ON
INPUT MIX
SEND
INPUT MATRIX
ON
INPUT MATRIX
SEND
INPUT MATRIX
SEND
INPUT MATRIX
SEND
INPUT ALLINPUT PROCESSINGO
INPUT ALLINPUT FADER/ONO
INPUT ALLINPUT PROCESSINGO
INPUT ALLMUTE GROUP ASSIGNO
INPUT ALLDCA GROUP ASSIGNO
INPUT PROCESSINGO
INPUT PROCESSINGO
INPUT FADER/ON
INPUT FADER/ON
INPUT FADER/ON
INPUT PROCESSINGO
Channel
Library
*4
*4
*4
*4
*4
*4
O
O
O
O
O
O
■
Mix Channels
Parameter
Name, Icon
Insert
AttO
EQOMIX EQMIX PROCESSINGO
Dynamics1
To Matrix
To Stereo/MonoOMIX ALLMIX PROCESSINGO
Pan/BalanceOMIX ALLMIX FADER/ONO
LCR
On OMIX ONMIX FADER/ONO
Fader OMIX FADER MIX FADER/ONO
From Input
Mute AssignOMIX ALLMUTE ASSIGNO
CueO
Mute SafeO
Recall SafeO
Fade Time, OnOSTOREO
■
Matrix Channels
Name, Icon
Insert
Att O
EQ OMATRIX EQMATRIX PROCESSINGO
Dynamics1
BalanceOMATRIX ALLMATRIX FADER/ONO
On OMATRIX ONMATRIX FADER/ONO
Fader OMATRIX FADERMATRIX FADER/ONO
From Input
From Mix
From Stereo/Mono
Mute Assign OMATRIX ALLMUTE ASSIGNO
Cue O
Mute Safe O
Recall Safe O
Fade Time, OnOSTOREO
OnOMIX ALLMIX PROCESSINGO
PointOMIX ALLMIX PROCESSINGO
Key-In Source
OthersOMIX DYNA1MIX PROCESSINGO
OnOMIX to MATRIX ONMIX FADER/ON
LevelO
Pan/BalanceOMIX to MATRIX SENDMIX FADER/ON
Pre/PostO
OnOMIX ALLMIX PROCESSINGO
CSROMIX ALLMIX PROCESSINGO
On
Level
Pan
Pre/Post
Parameter
OnOMATRIX ALLMATRIX PROCESSINGO
PointOMATRIX ALLMATRIX PROCESSINGO
Key-In Source
OthersOMATRIX DYNA1MATRIX PROCESSINGO
On
Level
Pan
Pre/Post
Linked in
stereo mode
*5
Linked in
stereo mode
RECALL SAFE USER LEVEL
OUUTPUT NAMEOUTPUT NAMEO
MIX ATT
MIX DYNA1MIX PROCESSING
MIX to MATRIX SENDMIX FADER/ON
MIX to MATRIX SEND
WITH MIX SENDWITH MIX SEND
WITH MIX SENDWITH MIX SEND
WITH MIX SENDWITH MIX SEND
WITH MIX SENDWITH MIX SEND
RECALL SAFE USER LEVEL
OUTPUT NAMEOUTPUT NAMEO
MATRIX ATT
MATRIX DYNA1MATRIX PROCESSING
WITH MATRIX SEND WITH MATRIX SEND
WITH MATRIX SENDWITH MATRIX SEND
WITH MATRIX SENDWITH MATRIX SEND
WITH MATRIX SENDWITH MATRIX SEND
MIX PROCESSINGO
*4
*4
*4
MIX PROCESSINGO
MATRIX PROCESSINGO
Channel
Library
*4
*4
*4
*4
Channel
Library
*4
*4
*4
*4
O
O
O
■
STEREO, MONO Channels
Parameter
Name, Icon
Insert
AttO
EQOSTEREO, MONO EQ
Dynamics1
To Matrix
BalanceOSTEREO, MONO ALL
On OSTEREO, MONO ON
Fader OSTEREO, MONO FADER
Mute AssignOSTEREO, MONO ALL MUTE ASSIGNO
CueO
Mute SafeO
Recall SafeO
Fade Time, OnOSTOREO
■
DCA
Name, Icon
OnDCA LEVEL/ONDCA MASTER ON
FaderDCA LEVEL/ONDCA MASTER ON
Fade Time, OnSTORE
*1
Linked parameters on ST IN Channels 1-4.
*2Applies to parameters for which the MIX channel 1_16 individual Send Parameter setting and the item in the
table are both enabled.
*3Applies to parameters for which the MATRIX channel 1_8 individual Send Parameter setting and the item in
the table are both enabled.
*4
User operation is allowed if the send-source channel’s “FADER/ON” is ON and the send-destination channel’s
“WITH SEND” is ON.
*5
Linked if the send-destination channel is Stereo.
OnOSTEREO, MONO ALL
PointOSTEREO, MONO ALL
Key-In Source
OthersO
OnO
LevelO
Pan/BalanceO
Pre/PostO
Parameter
Linked on the
STEREO channel
*5
RECALL SAFE USER LEVEL
OUTPUT NAMEOUTPUT NAME O
STEREO, MONO PROCESSING
STEREO, MONO PROCESSING
STEREO, MONO ATT
STEREO, MONO
DYNA1
STEREO, MONO
DYNA1
STEREO, MONO to
MATRIX ON
STEREO, MONO to
MATRIX SEND
STEREO, MONO to
MATRIX SEND
STEREO, MONO to
MATRIX SEND
RECALL SAFE USER LEVEL
DCA ALLDCA MASTER ON
STEREO, MONO PROCESSING
STEREO, MONO
PROCESSING
STEREO, MONO PROCESSING
STEREO, MONO PROCESSING
STEREO, MONO FADER/
*4
ON
STEREO, MONO FADER/
*4
ON
STEREO, MONO FADER/
ON
*4
STEREO, MONO PROCESSING
STEREO, MONO FADER/
ON
STEREO, MONO FADER/
ON
STEREO, MONO FADER/
ON
Channel
Library
O
O
O
O
O
O
O
O
O
O
O
O
Page 12
Yamaha Pro Audio global web site:
http://www.yamahaproaudio.com/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation