Yamaha HTR-5860 User Manual

HTR-5860

AV Receive r

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, wi thin an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1 Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions

should be followed.

5 Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6 Attachments – Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8 Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9 A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10 Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11 Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped

with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14 Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15 Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16 Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18 Servicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19 Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

IMPORTANT SAFETY INSTRUCTIONS

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in perfor-

mance - this indicates a need for service.

20 Replacement Parts – When replacement parts are required,

be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

21 Safety Check – Upon completion of any service or repairs to

this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the manufacturer.

23 Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

24 Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810–20)

GROUNDING CONDUCTORS (NEC SECTION 810–21)

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

MAST

GROUND CLAMP

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620. The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its subsidiaries.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: – Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage. 9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord. 11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified. 13 To prevent damage by lightning, disconnect the

power cord and outdoor antenna from the wall outlet

during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the AC power plug from the wall outlet.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT

Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

iii

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

CONTENTS

INTRODUCTION

FEATURES ............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories.................................................. 3

Installing batteries in the remote control...................3

CONTROLS AND FUNCTIONS ......................... 4

Front panel.................................................................4

Remote control...........................................................6

Using the remote control ........................................... 7

Front panel display .................................................... 8

Rear panel................................................................10

PREPARATION

SPEAKER SETUP ............................................... 11

Speaker placement................................................... 11

Speaker connections................................................ 12

CONNECTIONS .................................................. 15

Before connecting components................................15

Connecting video components................................. 16

Connecting audio components.................................19

Connecting the FM and AM antennas.....................21

Connecting the power supply cord .......................... 22

Speaker impedance setting ......................................22

Turning on the power...............................................23

AUTO SETUP....................................................... 24

Introduction..............................................................24

Optimizer microphone setup....................................24

Starting the setup.....................................................25

BASIC OPERATION

PLAYBACK.......................................................... 30

Basic operations....................................................... 30

Selecting sound field programs ...............................32

Selecting input modes.............................................. 36

FM/AM TUNING ................................................. 38

Automatic and manual tuning..................................38

Presetting stations.................................................... 39

Selecting preset stations...........................................41

Exchanging preset stations ......................................42

XM Satellite Radio TUNING .............................. 44

What is XM Satellite Radio? ................................... 44

XM Satellite Radio connections .............................. 44

XM Satellite Radio functions..................................45

Activating XM Satellite Radio................................46

Basic XM Satellite Radio operations.......................47

XM Satellite Radio search modes............................ 48

Setting XM Satellite Radio preset channels............ 51

RECORDING ....................................................... 54

SOUND FIELD PROGRAMS

SOUND FIELD PROGRAM DESCRIPTIONS 55

For movie/video sources..........................................55

For music sources....................................................57

ADVANCED OPERATION

ADVANCED OPERATIONS ..............................58

Selecting the OSD mode.......................................... 58

Using the sleep timer...............................................58

Manually adjusting speaker levels........................... 59

SET MENU ............................................................60

Using SET MENU................................................... 62

1 SOUND MENU.................................................... 63

2 INPUT MENU......................................................68

3 OPTION MENU................................................... 70

ADVANCED SETUP MENU ...............................72

REMOTE CONTROL FEATURES ...................74

Control area ............................................................. 74

Setting remote control codes ................................... 75

Controlling other components .................................76

Switching library codes........................................... 77

Clearing set up remote control codes.......................77

ADDITIONAL INFORMATION

EDITING SOUND FIELD PARAMETERS ......78

What is a sound field............................................... 78

Changing parameter settings ...................................78

SOUND FIELD PARAMETER

DESCRIPTIONS...............................................80

TROUBLESHOOTING .......................................85

RESETTING THE FACTORY PRESETS ........90

GLOSSARY...........................................................91

Audio formats.......................................................... 91

Sound field programs............................................... 92

Audio information ................................................... 92

Video signal information......................................... 93

SPECIFICATIONS...............................................94

PREPARATIONINTRODUCTION

OPERATION

BASIC

SOUND FIELD

PROGRAMS

OPERATION

ADVANCED

INFORMATION

ADDITIONAL

FEATURES

Built-in 7-channel power amplifier

◆ Minimum RMS output power (0.06% THD, 20 Hz to 20 kHz, 8 Ω) Front: 95 W + 95 W Center: 95 W Surround: 95 W + 95 W Surround back: 95 W + 95 W

XM Satellite Radio

◆ XM Satellite Radio programming (using the “XM Connect and Play digital antenna accessory”, sold separately)

Other features

◆ YPAO: YAMAHA Parametric Room Acoustic Optimizer for automatic speaker setup

Sound field features

◆ Proprietary YAMAHA technology for the creation of sound fields

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6,

DTS 96/24 decoder

◆ Dolby Pro Logic/Dolby Pro Logic II/ Dolby Pro Logic IIx decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated AM/FM tuner

◆ 40-station random and direct preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (preset editing)

◆ 192-kHz/24-bit D/A converter

◆ A SET MENU that provides you with items for

optimizing this unit for your audio/video system

◆ 8 additional input jacks for discrete multi-channel input

◆ PURE DIRECT for pure fidelity sound with analog and

PCM sources

◆ On-screen display function helpful in controlling this unit

◆ S-video signal input/output capability

◆ Component video input/output capability

◆ Video signal conversion (Composite video ↔ S-video

→ Component video) capability for monitor out

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Cinema and music night listening modes

◆ Remote control with preset remote control codes

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol are trademarks of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA CORPORATION.

“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of Digital Theater Systems, Inc.

The XM name and related logos are registered trademarks of XM Satellite Radio Inc.

GETTING STARTED

Supplied accessories

Please check that you received all of the following parts.

Remote control

TRANSMITCODE SET

SYSTEM

POWERPOWER

STANDBY

POWER

AVTV

CD MD/CD-R

TUNER

SLEEP

DTV/CBL

V-AUXDVD

MULTI CH IN

VCR 1 DVR/VCR2

TV VOL TV CH

TV MUTE TV INPUT

STANDARD

SPEAKERS

LEVEL

BAND SRCH MODE

A-E/CAT. A-E/CAT.

MEMORY ON SCREEN

REC

DISC SKIP

AMP

VOLUME

MUTE

MOVIE

ENTERTAIN

MUSICSTEREO

4321

PURE DIRECT

EXTD SUR.

SELECT

81070965

STRAIGHT

NIGHT

ENT.

EFFECT

PRESET/CH

SET MENU

FAVOR.

MENUTITLE

ENTER

DISPLAYRETURN

AUDIO

Batteries (4)

(AAA, R03, UM-4)

Indoor FM antenna

Installing batteries in the remote control

AM loop antenna

Optimizer microphone

Notes on batteries

• Change all of the batteries if you notice the following conditions; the operation range of the remote control decreases, the indicator does not flash or its light becomes dim.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

• If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

• Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

INTRODUCTION

1 Press the part and slide the battery

compartment cover off.

Insert four supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ / –) on the inside of the battery compartment.

3 Slide the cover back until it snaps into place.

If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared.

CONTROLS AND FUNCTIONS

Front panel

CONTROLS AND FUNCTIONS

STANDBY

/ON

OPTIMIZER

MIC

PHONES

SILENT CINEMA

PURE DIRECT

SPEAKERS

A B

SEARCH MODE

526

PRESET/TUNING

FM/AM

EDIT

PROGRAM INPUT

STRAIGHT

EFFECT

CATEGORY

A/B/C/D/E

TONE CONTROL

1 STANDBY/ON

Turns on this unit or sets it to the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.

Note

In standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control.

2 PURE DIRECT

Turns on or off PURE DIRECT mode (see page 34).

3 Remote control sensor

Receives signals from the remote control.

4 Front panel display

Shows information about the operational status of this unit.

5 PRESET/TUNING (EDIT), SEARCH MODE

Switches the function of PRESET/TUNING/CH l / h (LEVEL –/+) between selecting preset station numbers and tuning.

6 FM/AM, XM

Switches the reception band when the unit is in tuner mode.

(U.S.A. model)

VOLUME

PRESET/TUNING/CH

LEVELNEXT

INPUT MODE

7 A/B/C/D/E, NEXT, CATEGORY

MAN'L/AUTO FM

MEMORY

TUNING MODE

DISPLAY

AUTO/MAN'L MONO

MULTI CH

INPUT

VIDEO AUX

VIDEO

S VIDEO

OPTICALRAUDIOL

Selects one of the 5 preset station groups (A to E) when the unit is in tuner mode. Selects the speaker channel to be adjusted when the unit is not in tuner mode.

8 PRESET/TUNING/ CH

l / h, LEVEL –/+

Selects preset station number 1 to 8 when the colon (:) is displayed next to the band indication in the front panel display when the unit is in tuner mode. Selects the tuning frequency when the colon (:) is not displayed. Adjusts the level of the speaker channel selected using A/B/C/D/E (NEXT) when the unit is not in tuner mode.

9 MEMORY (MAN’L/AUTO FM)

Stores a station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning.

0 TUNING MODE (AUTO/MAN’L MONO),

DISPLAY

Switches the tuning mode between automatic (AUTO indicator on) and manual (AUTO indicator off).

A VOLUME

Controls the output level of all audio channels. This does not affect the REC OUT level.

B OPTIMIZER MIC jack

Use to connect and input audio signals from the supplied microphone for use with the AUTO SETUP function (see page 24).

C PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the PRE OUT jacks or to the speakers. All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

D SPEAKERS A/B

Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

E STRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

F PROGRAM

Use to select sound field programs or adjust the bass/treble balance (in conjunction with TONE CONTROL).

CONTROLS AND FUNCTIONS

INTRODUCTION

G TONE CONTROL

Use to adjust the bass/treble balance for the front left and right, center, presence and subwoofer channels (see pages 31).

H INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this unit’s input jacks (see page 36).

I INPUT selector

Selects the input source you want to listen to or watch.

J MULTI CH INPUT

Selects the source connected to the MULTI CH INPUT jacks. When selected, the MULTI CH INPUT source takes priority over the source selected with INPUT (or the input selector buttons on the remote control).

K VIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source.

Available only when the unit is in the XM Satellite Radio mode (see page 45).

CONTROLS AND FUNCTIONS

Remote control

This section describes the function of each control on the remote control used to control this unit. To operate other components, see “REMOTE CONTROL FEATURES” on page 74.

POWERPOWER

AVTV

CD MD/CD-R

TRANSMITCODE SET

STANDBY

TUNER

SYSTEM

POWER

SLEEP

V-AU XDVD

DTV/CBL

VCR 1 DVR/VCR2

MULTI CH IN

AMP

ENTERTAIN

EXTD SUR.

PRESET/CH

ENTER

NIGHT

VOLUME

MUTE

MOVIE

4321

PURE DIRECT

STRAIGHT

ENT.

EFFECT

SET MENU

MENUTITLE

DISPLAYRETURN

AUDIO

G H

TV VOL TV CH

TV MUTE TV INPUT

MUSICSTEREO

STANDARD

SELECT

SPEAKERS

LEVEL

BAND SRCH MODE

A-E/CAT. A-E/CAT.

MEMORY ON SCREEN

REC

DISC SKIP

1 Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

2 CODE SET

Use to set up remote control codes (see page 75).

3 Input selector buttons

Select the input source and change the control area.

4 Sound field program/numeric buttons

Use to select sound field programs. Use numbers 1 through 8 to select preset stations when the unit is in tuner mode. Use SELECT to playback 2-channel sources in multiple channel format (see page 33). Use EXTD SUR. to switch between 5.1 or 6.1/7.1-channel playback of multi-channel software (see page 33). Use PURE DIRECT to turn on or off PURE DIRECT mode (see page 34).

5 SPEAKERS A/B

Use to turn on or off the set of front speakers connected to the A and/or B terminal on the rear panel each time the corresponding button is pressed.

6 LEVEL, BAND

Selects the speaker channel to be adjusted and sets the level. Switches the reception band when the unit is in tuner mode.

7 Cursor buttons u / d / j / i /ENTER

Use to select and adjust sound field program parameters or SET MENU items. Press j / i to select a preset station group (A to E) when the unit is in tuner mode. Press u / d to select a preset station number (1 to 8) when the unit is in tuner mode.

8 RETURN, MEMORY

Returns to the previous menu level when adjusting the SET MENU parameters.

9 TRANSMIT indicator

Flashes while the remote control is sending signals.

0 STANDBY

Sets this unit in the standby mode.

A SYSTEM POWER

Turns on the power of this unit.

B SLEEP

Sets the sleep timer.

CONTROLS AND FUNCTIONS

Using the remote control

C MULTI CH IN

Selects multi-channel input when using an external decoder (etc.).

D AMP

Selects the AMP mode. You must select the AMP mode to control the main unit.

E VOLUME +/–

Increases or decreases the volume level.

F MUTE

Mutes the sound. Press again to restore the audio output to the previous volume level.

G NIGHT

Turns on or off the night listening modes (see page 35).

H STRAIGHT (EFFECT), ENT.

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

I SET MENU, SRCH MODE

Activates the SET MENU function.

Available only when the unit is in the XM Satellite Radio mode (see page 45).

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

PURE DIRECT

STANDBY

/ON

OPTIMIZER

MIC

PHONES

SILENT CINEMA

PRESET/TUNING

FM/AM

A/B/C/D/E

PRESET/TUNING/CH

SEARCH MODE

EDIT

SPEAKERS

A B

PROGRAM INPUT

STRAIGHT

EFFECT

MEMORY

CATEGORY

MAN'L/AUTO FM

LEVELNEXT

INPUT MODE

TONE CONTROL

30 30

TRANSMITCODE SET

SYSTEM

POWERPOWER

STANDBY

POWER

AVTV

MD/CD-R

TUNER

SLEEP

DTV/CBL

V-AUX

DVD

MULTI CH IN

VCR 1DVR/VCR2

AMP

VOLUME

TV VOL TV CH

TV MUTE TV INPUT

MUTE

STEREO

ENTERTAIN

MUSIC

MOVIE

4321

PURE DIRECT

EXTD SUR.STANDARD

SELECT

70965

SPEAKERS

NIGHT

STRAIGHT

ENT.

EFFECT

PRESET/CH

LEVEL

SET MENU

MENUTITLE

BAND

SRCH MODE

ENTER

A-E/CAT. A-E/CAT.

DISPLAYRETURN

MEMORY ON SCREEN

REC

AUDIO

DISC SKIP

VOLUME

TUNING MODE

DISPLAY

AUTO/MAN'L MONO

VIDEO AUX

MULTI CH INPUT

OPTICALRAUDIOL

VIDEO

S VIDEO

Approximately 6 m (20 ft)

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions: – places of high humidity, such as near a bath – high temperature, such as near a heater or stove – extremely low temperatures – dusty places

INTRODUCTION

CONTROLS AND FUNCTIONS

HOLD

RT CT

EON

PTY

Front panel display

123456789 A B C0

MATRIX DISCRETE

DIGITAL

PCM

PL x

96 24

DVR/VCR2

VIRTUAL

STANDARD

NIGHT

V-A UX

SP A B

VCR1

SILENT CINEMA

DTV/CBL

1 Decoder indicators

When any of this unit’s decoders function, the respective indicator lights up.

2 VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see page 35).

3 SILENT CINEMA indicator

Lights up when headphones are connected and a sound field program is selected (see page 31).

4 Input source indicators

A cursor lights to show the current input source.

5 Sound field indicators

Light to indicate the active DSP sound fields.

Presence DSP sound field

Listening position

Left surround DSP sound field

Surround back DSP sound field

Right surround DSP sound field

6 CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field program.

7 YPAO indicator

Lights up during the auto setup procedure and when the auto setup speaker settings are used without any modifications.

8 AUTO indicator

Lights up when this unit is in automatic tuning mode.

9 TUNED indicator

Lights up when this unit is tuned into a station.

YPAO

MD/CD-R

AUTO

PTY

HOLD

TUNED STEREO MUTE

RT CT

PTY

EON

MEMORY

SLEEP

KNLED

96/24

LFE

DVD

HiFi DSP

IJ M

0 STEREO indicator

Lights up when this unit is receiving a strong signal for an FM stereo broadcast while the AUTO indicator is lit.

A MEMORY indicator

Flashes to show that a station can be stored.

B MUTE indicator

Flashes while the MUTE function is on.

C VOLUME level indication

Indicates the current volume level.

D PCM indicator

Lights up when this unit is reproducing PCM (Pulse Code Modulation) digital audio signals.

E STANDARD

Lights up when Surround Standard or Surround Enhanced is selected (see page 33).

F NIGHT indicator

Lights up when you select night listening mode.

G SP A B indicators

Light up according to the set of front speakers selected. Both indicators light up when both sets of speakers are selected.

H Headphones indicator

Lights up when headphones are connected.

I HiFi DSP indicator

Lights up when you select a HiFi DSP sound field program.

J Multi-information display

Shows the current sound field program name and other information when adjusting or changing settings.

PHONOCDTUNER

VOLUME

LCR

SL SB SR

K SLEEP indicator

Lights up while the sleep timer is on.

CONTROLS AND FUNCTIONS

L 96/24 indicator

Lights up when a DTS 96/24 signal is input to this unit.

M LFE indicator

Lights up when the input signal contains the LFE signal.

N Input channel indicators

Indicate the channel components of the current digital input signal.

INTRODUCTION

CONTROLS AND FUNCTIONS

Rear panel

12 4 586

DIGITAL OUTPUT

MD/CD-R

OPTICAL

MD/CD-R

DVD

SURROUND

DTV/CBL

SURROUND

DVD

COAXIAL

DIGITAL

INPUT

(PLAY)

MD/ CD-R

OUT

(REC)

FRONT

BACK

SUB

WOOFER

MULTI CH INPUT

SYSTEM CONNECTOR

AUDIO AUDIO

CENTER

MONITOR OUT

VIDEO S VIDEO

DVD

DTV/ CBL

VCR 1

OUT

DVR/

VCR 2

OUT

VIDEO S VIDEO

VIDEO

COMPONENT VIDEO

DVD

DTV/ CBL

MONITOR

OUT

PR PB Y

FRONT

SURROUND

75Ω UNBAL.

ANT

PRE OUT

CENTER SINGLE

SUB

SURROUND

WOOFER

BACK

FRONT

90 A B

1 DIGITAL OUTPUT jack

See page 19 for details.

2 Audio component jacks

See page 19 for connection information.

3 SYSTEM CONNECTOR jack

Use to connect a YAMAHA subwoofer equipped with a SYSTEM CONNECTOR jack to this unit (see page 13).

TUNER

ANT

GND

AC OUTLETS

SWITCHED

PRESENCE

SPEAKERS

SURROUND

CENTER

8 AC OUTLET(S)

Use to supply power to your other A/V components (see page 22).

9 DIGITAL INPUT jacks

See pages 16, 18 and 19 for details.

0 MULTI CH INPUT jacks

See page 17 for connection information.

SURROUND BACK

(U.S.A. model)

4 Video component jacks

See pages 16 and 18 for connection information.

5 Antenna terminals

See page 21 for connection information.

6 PRESENCE speaker terminals

See page 13 for connection information.

7 XM jack

See page 44 for connection information.

A PRE OUT jacks

See page 20 for connection information.

B Speaker terminals

See page 13 for connection information.

SPEAKER SETUP

Speaker placement

The speaker layout below shows the standard ITU-R* speaker setting. You can use it to enjoy CINEMA DSP and multi-channel audio sources.

ITU-R is the radio communication sector of the ITU (International Telecommunication Union).

30 cm (12 in) or more

SBL

30˚

60˚

80˚

SBR

SPEAKER SETUP

Surround speakers (SR and SL)

The surround speakers are used for effect and surround sounds. Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 ft) above the floor.

Surround back speakers (SBR and SBL)

The surround back speakers supplement the surround speakers and provide for more realistic front-to-back transitions. Place these speakers directly behind the listening position and at the same height as the surround speakers. They should be positioned at least 30 cm (12 in) apart. Ideally, they should be positioned at the same width as the front speakers.

Subwoofer

The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity reproduction of the LFE (lowfrequency effect) channel included in Dolby Digital and DTS software. The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.

PREPARATION

1.8 m (6 ft)

Front speakers (FR and FL)

The front speakers are used for the main source sound plus effect sounds. Place these speakers an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system. Align the front face of the center speaker with the front face of your video monitor. Place the speaker centrally between the front speakers and as close to the monitor as possible, such as directly over or under it.

Presence speakers (PR and PL)

Presence speakers supplement the sound from the front speakers with extra ambient effects produced by CINEMA DSP (see page 55). These effects include sounds that filmmakers intend to locate a little farther back behind the screen in order to create more theater-like ambience. Place these speakers at the front of the room about 0.5 - 1 m (1 - 3 ft) outside the front speakers, facing slightly inwards, and about 1.8 m (6 ft) above the floor.

SPEAKER SETUP

Speaker connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

• If you will use 4 or 6 ohm speakers, be sure to set this unit’s speaker impedance setting to 4 ohms before using (see page 22).

• Before connecting the speakers, make sure that the power of this unit is off.

• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/or speakers.

• Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor.

A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps with a stripe, groove or ridges. Connect the striped (grooved, etc.) cable to the “+” (red) terminals on this unit and your speaker. Connect the plain cable to the “–” (black) terminals.

10 mm (3/8")

5 Tighten the knob to secure the wire.

Red: positive (+)

Black: negative (–)

■ Connecting to PRESENCE speaker terminals

1 Open the tab.

2 Insert one bare wire into the hole of each

terminal.

1 Remove approximately 10 mm (3/8") of

insulation from the end of each speaker cable.

2 Twist the exposed wires of the cable together

to prevent short circuits.

3 Unscrew the knob.

4 Insert one bare wire into the hole in the side

of each terminal.

3 Return the tab to secure the wire.

■ Banana plug connections

First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

Banana plug

You can also use banana plugs with the PRESENCE speaker terminals. Open the tab, then insert one banana plug connector into the hole of each terminal. Do not attempt to close the tabs after connecting the banana plugs.

SPEAKER SETUP

Subwoofer

system

Presence speakers

LeftRight

Surround speakers

LeftRight

SYSTEM CONNECTOR

6 7 10

PRESENCE

SPEAKERS

FRONT

Front

speakers

(B)

CENTER

Center

speaker

4 5

SURROUND

SURROUND BACK

LeftRight

Surround back

speakers

PREPARATION

LeftRight

Front speakers (A)

You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously.

• The surround back speakers output the surround back channel included in Dolby Digital EX and DTS-ES software and only operate when the Dolby Digital EX, DTS-ES or Dolby Pro Logic IIx decoder is turned on.

• The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields are selected.

SPEAKER SETUP

■ FRONT terminals

Connect one or two speaker systems (6, 7) to these terminals. If you use only one speaker system, connect it to the FRONT A or B terminals.

■ CENTER terminals

Connect a center speaker (8) to these terminals.

■ SURROUND terminals

Connect surround speakers (4, 5) to these terminals.

■ SURROUND BACK terminals

Connect surround back speakers (9, 10) to these terminals. If you only connect one surround back speaker, connect it to the left (L) terminals.

■ PRESENCE terminals

Connect presence speakers (2, 3) to these terminals.

■ SUBWOOFER PRE OUT jack

Connect a subwoofer with built-in amplifier (1), such as the YAMAHA Active Servo Processing Subwoofer System, to this jack.

■ SYSTEM CONNECTOR jack

Use this jack to control the power of your YAMAHA subwoofer if a system connector jack is available on the subwoofer.

Speaker layout

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between components are complete.

■ Cable indications

For analog signals

left analog cables

right analog cables

For digital signals

optical cables

coaxial cables

For video signals

video cables

S-video cables

component video cables

■ Analog jacks

You can input analog signals from audio components by connecting audio pin cable to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks.

■ Digital jacks

This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack. All digital input jacks are compatible with 96-kHz sampling digital signals.

Note

This unit handles digital and analog signals independently. Thus audio signals input to the analog jacks are only output to the analog OUT (REC) jacks. Likewise audio signals input to the digital (OPTICAL or COAXIAL) jacks are only output to the DIGITAL OUTPUT jack.

CONNECTIONS

Dust protection cap

Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust.

■ Video jacks

This unit has three types of video jacks. Connection depends on the availability of input jacks on your monitor. The signals input through the S VIDEO jacks on this unit are automatically converted for output through the VIDEO jacks. When VIDEO CONV. is set to ON (see page 70), signals input through the VIDEO jacks can be output through the S VIDEO and COMPONENT VIDEO jacks. Likewise, signals input through the S VIDEO jacks can also be output through the COMPONENT VIDEO jacks.

VIDEO

S VIDEO

VIDEO jacks

For conventional composite video signals.

S VIDEO jacks

For S-Video signals, separated into luminance (Y) and color (C) video signals to achieve high-quality color reproduction.

COMPONENT VIDEO jacks

For component signals, separated into luminance (Y) and color difference (P

B, PR) to provide the best quality in

picture reproduction.

Signal flow inside this unit

Input

COMPONENT VIDEO

S VIDEO

VIDEO

Only when VIDEO CONV. is set to ON (see page 70).

Note

When signals are input through both the S VIDEO and VIDEO jacks, signals input through the S VIDEO jack have priority.

COMPONENT VIDEO

PR PB Y

Output

(MONITOR OUT)

PREPARATION

CONNECTIONS

Connecting video components

■ Connections for DVD playback

Note

Be sure to connect your video source components in the same way you connect your video monitor to this unit if V.CONV (see page 70) is set to OFF. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video source components to this unit using the VIDEO connections. (Even when V.CONV is set to OFF, S-video signals input from your video source component are automatically converted to composite signals in this unit.)

DVD

Coaxial out

Optical out

Audio out

DVD player

LRC

AUDIO

Video out

VIDEO S VIDEO

DVD

VIDEO

R PB Y

COMPONENT VIDEO

PR PB Y

DVD

MONITOR

OUT

Video in

Video

monitor

DVD

COAXIAL

DIGITAL

INPUT

MONITOR OUT

VIDEO S VIDEO

CONNECTIONS

■ Connecting to the MULTI CH INPUT jacks

This unit is equipped with 8 additional input jacks (left and right FRONT, CENTER, left and right SURROUND, left and right SURROUND BACK and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or pre-amplifier. Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right outputs to the left and right input jacks for the front and surround channels.

For 6-channel input

FRONT

SURROUND

WOOFER

MULTI CH INPUT

Subwoofer out

Multi-format player/

External decoder

Front out

For 8-channel input

FRONT

SURROUND

BACK

SUB

CENTER

LRLR

Center out

Surround out

Front out

SUB

CENTER

WOOFER

MULTI CH INPUT

Subwoofer out

Center out

Multi-format player/

External decoder

LR LRLR

Surround back out

Surround

PREPARATION

out

Notes

• When you select MULTI CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you cannot select sound field programs.

• This unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that you connect at least a 5.1-channel speaker system before using this feature.

• When headphones are used, only front left and right channels are output.

CONNECTIONS

■ Connections for other video components

Notes

• Be sure to connect your video source components in the same way you connect your video monitor to this unit if VIDEO CONV. (see page 70) is set to OFF. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video source components to this unit using the VIDEO connections. (Even when V.CONV is set to OFF, S-video signals input from your video source component are automatically converted to composite signals in this unit.)

• Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video connections (i.e., S-video) between each component.

Video out

Optical out

Audio out

Cable TV or

satellite tuner

AUDIO

VIDEO S VIDEO

DTV/ CBL

VIDEO

RPB

COMPONENT VIDEO

PR PB Y

DTV/

CBL

MONITOR

OUT

Video in

Video

monitor

VCR 1

OUT

DTV/CBL

COAXIAL

DIGITAL

INPUT

MONITOR OUT

VIDEO S VIDEO

LR LR

DVD recorder

Audio out Video out

or VCR

■ VIDEO AUX jacks (on the front panel)

Use these jacks to connect any video source, such as a game console or video camera, to this unit.

or or

Video inAudio in

VIDEO AUX

VIDEOS VIDEO OPTICALL AUDIO R

Optical out

Audio out R

Audio out L

Video out

Game console or video camera

S-video out

Connecting audio components

■ Connections for audio components

CONNECTIONS

MD recorder or

tape deck

Optical in

Optical out

Audio out

Audio in

DIGITAL OUTPUT

MD/CD-R

OPTICAL

MD/CD-R

COAXIAL

DIGITAL

INPUT

(PLAY)

MD/

CD-R

OUT

(REC)

AUDIO

Audio out

CD player

PREPARATION

Coaxial out

CONNECTIONS

■ Connecting to an external amplifier

If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the PRE OUT jacks as follows.

Notes

• When audio pin plugs are connected to the PRE OUT jacks for output to an external amplifier, do not make connections to the corresponding SPEAKERS terminals. Set the volume of the amplifier connected to this unit to the maximum.

• The signals output through the FRONT PRE OUT and CENTER PRE OUT jacks are affected by the TONE CONTROL settings.

• If SPEAKERS A is turned off and SP B is set to ZONE B (see page 71), signals will only be output from the FRONT PRE OUT jacks.

12354

PRE OUT

CENTER SINGLE

SURROUND

SUB

WOOFER

BACK

FRONT

1 FRONT PRE OUT jacks

Front channel line output jacks.

2 SURROUND PRE OUT jacks

Surround channel line output jacks.

3 CENTER PRE OUT jack

Center channel line output jack.

4 SURROUND BACK PRE OUT jacks

Surround back or presence channel line output jacks.

5 SUBWOOFER PRE OUT jack

Connect a subwoofer with built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to this jack.

Notes

• Each PRE OUT jack outputs the same channel signals as the corresponding speaker terminals.

• Adjust the volume level of the subwoofer with the control on the subwoofer. It is also possible to adjust the volume level using the remote control (see “Manually adjusting speaker levels” on page 59).

• Some signals may not be output from the SUBWOOFER PRE OUT jack depending on the SPEAKER SET (see page 63) and LFE/BASS OUT (see page 64) settings.

Connecting the FM and AM antennas

CONNECTIONS

Both FM and AM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals.

Indoor FM antenna (included)

75Ω UNBAL.

ANT

AM loop antenna

(included)

TUNER

GND

ANT

Ground (GND terminal)

For maximum safety and minimum interference, connect the antenna terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

GND

■ Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it

to the terminals on this unit.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas.

PREPARATION

2 Press and hold the tab to

insert the AM loop antenna lead wires into the AM ANT and GND terminals.

3 Orient the AM loop antenna

for the best reception.

CONNECTIONS

Connecting the power supply cord Speaker impedance setting

■ Connecting the AC power cord

Plug the power cord into an AC wall outlet.

■ AC OUTLET(S) (SWITCHED).....2 outlets

Use these outlets to connect the power cords from your other components to this unit. Power to the AC OUTLET(S) is controlled by this unit’s STANDBY/ON (or SYSTEM POWER and STANDBY). The outlet(s) supply power to any connected component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the AC OUTLET(S) is 100 W.

■ Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However if the power cord is disconnected from the AC wall outlet, or the power supply is cut for more than one week, the stored data will be lost.

CAUTION

If you are using 4 or 6 ohm speakers, set the impedance to 4 or 6 ohms as follows before turning on the power.

Be sure this unit is in the standby mode.

1 Turn off the power to this unit, and while

holding down STRAIGHT (EFFECT), press STANDBY/ON.

This unit turns on, and “SP IMP.” appears in the front panel display.

STRAIGHT

EFFECT

While holding down, press

STANDBY

/ON

SP IMP.

2 Press STRAIGHT (EFFECT) repeatedly to

select “4 Ω MIN”.

STRAIGHT

EFFECT

3 Press STANDBY/ON to turn off the power.

STANDBY

/ON

The setting you made is reflected the next time this unit’s power is turned on.

Turning on the power

TRANSMITCODE SET

STANDBY

SYSTEM

POWER

CD MD/CD-R

TUNER

V-AUXDVD

AMP

POWERPOWER

VOLUME

TV MUTE TV INPUT

TV VOL TV CH

AVTV

VCR 1 DVR/VCR2

DTV/CBL

MULTI CH IN

SLEEP

When all connections are complete, turn on the power of this unit.

CONNECTIONS

SILENT CINEMA

PURE DIRECT

STANDBY

/ON

OPTIMIZER

MIC

PHONES

SPEAKERS

A B

PRESET/TUNING

FM/AM

SEARCH MODE

EDIT

PROGRAM INPUT

STRAIGHT

EFFECT

A/B/C/D/E

PRESET/TUNING/CH

CATEGORY

LEVELNEXT

INPUT MODE

TONE CONTROL

MEMORY

TUNING MODE

DISPLAY

MAN'L/AUTO FM

AUTO/MAN'L MONO

MULTI CH

INPUT

(U.S.A. model)

VOLUME

VIDEO AUX

OPTICALRAUDIOL

VIDEO

S VIDEO

1 Press STANDBY/ON (or SYSTEM POWER on

the remote control) to turn on the power of this unit.

SYSTEM

STANDBY

/ON

POWER

PREPARATION

Front panel

Remote control

2 Turn on the video monitor connected to this

unit.

AUTO SETUP

Introduction

This receiver employs YAMAHA Parametric Room Acoustic Optimizer (YPAO) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments. The supplied optimizer microphone collects and analyzes the sound your speakers produce in your actual listening environment.

Notes

• Please be advised that it is normal for loud test tones to be output during the auto setup procedure.

• If auto setup stops and error messages appear on the screen, follow the troubleshooting on page 28.

YPAO performs the following checks and makes appropriate adjustments to give you the best possible sound from your system.

WIRING: Checks which speakers are connected and the polarity of each speaker.

SIZE: Checks the speakers frequency response and sets the crossover/high cut frequency for the subwoofer to improve the sound relationship between the speakers and the subwoofer.

DISTANCE: Checks the distance of each speaker from the listening position and adjusts the delay of each channel so that the sound from each speaker reaches the listening position at the same time.

EQUALIZING: Adjusts frequency and levels of each channel’s parametric equalizer to reduce coloration across the channels and create a cohesive sound field. This is particularly important if you use different brands or sizes of speakers for some channels or have a room with unique sonic characteristics. YPAO equalizing calibration incorporates three parameters (frequency, level and Q factor) for each of the seven bands in its parametric equalizer to provide highly precise automatic adjustment of frequency characteristics.

Optimizer microphone setup

1 Connect the supplied optimizer microphone

to the OPTIMIZER MIC jack on the front panel.

(U.S.A. model)

PURE DIRECT

STANDBY

/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

OPTIMIZER

MIC

PHONES

SILENT CINEMA

SPEAKERS

A B

SEARCH MODE

EDIT

EFFECT

CATEGORY

PROGRAM

Notes

• After you have completed the auto setup procedure, be sure to disconnect the optimizer microphone.

• The optimizer microphone is sensitive to heat. – Keep it away from direct sunlight. – Do not place it on top of this unit.

2 Place the optimizer microphone on a flat

level surface with the omni-directional microphone head upward, at your normal listening position.

If possible, use a tripod (etc.) to affix the optimizer mic at the same height as your ears would be when you are seated in your listening position.

Optimizer microphone position

PRESET/TUNING/CH

LEVELNEXT

INPUT MODE

TONE CONTROLSTRAIGHT

LEVEL: Checks and adjusts the sound level (volume) of each speaker.

AUTO SETUP

Starting the setup

For best results, make sure the room is as quiet as possible during the auto setup procedure (YPAO). If there is too much ambient noise, the results may not be satisfactory.

If your subwoofer has adjustable volume and crossover/high cut frequency controls, set the volume between 9 and 11 o’clock (as viewed on a conventional clockface) and set the crossover/high cut frequency to the maximum.

VOLUME

MAX

MIN

Subwoofer

1 Switch on this unit and your video monitor.

Make sure the OSD is displayed.

2 Press AMP.

3 Press SET MENU.

When MEMORY GUARD is set to ON, you cannot select any other SET MENU items (see page 60).

4 Press u / d to select AUTO SETUP, then

press ENTER.

CROSSOVER/

HIGH CUT

50Hz

150Hz

AMP

SET MENU

SRCH MODE

5 Press u / d to select “SETUP”, then press

j / i to select the desired setting.

1 AUTO:MENU

. SETUP;;;;;;;AUTO

START  Automatic processing of all items

[ ]/[ ]:Up/Down

[<]/[>]:Select

AUTO To perform the auto setup procedure

(YPAO).

RELOAD To reload the last auto setup (YPAO)

settings to override any manual changes.

UNDO To undo the last auto setup (YPAO)

and restore the previous settings.

DEFAULT To restore the factory preset (default)

setup parameters.

You can choose RELOAD or UNDO only if you have already performed the auto setup procedure.

6 Press d to select “START”, then press

ENTER to start the setup procedure.

The screen changes as follows.

1 AUTO:MENU

SETUP;;;;;;;AUTO .START  Automatic processing of all items

[]/[]:Up/Down [ENTER]:Start

PREPARATION

PRESET/CH

ENTER

A-E/CAT. A-E/CAT.

SET MENU

.;AUTOSETUP ;MANUALSETUP ;SIGNAL INFO.

[ ]/[ ]:Up/Down [ENTER]:Enter

PRESET/CH

ENTER

A-E/CAT. A-E/CAT.

2 AUTO:CHECK

INITIALZING

.

WIRING

SIZE/DISTANCE. EQUALIZING.

LEVEL. CHECK CH=CENTER |||||;;;;;;;;

[]:Exit

RESULT:EXIT

.WARNING (3) RESULT  SP : 5/4/0.1  DIST: 10.0/ 12.0ft  LVL : -9.0/ +6.5dB

.>SET CANCEL

[]/[]:Up/Down [ENTER]:Enter

AUTO SETUP

The results displayed in the RESULT:EXIT screen are as follows:

SP The number of connected speakers

displayed in the order: Front/Back/Subwoofer

DIST The distance of the speakers from this

unit displayed in the order: Closest speaker distance/Farthest speaker distance

LVL The speaker output level displayed in

the order: Lowest output level/Highest output level

• If you selected AUTO in step 5, “WAITING” appears when the auto setup procedure is started, then loud test tones are output from each speaker in turn.

• If you selected DEFAULT, RELOAD or UNDO in step 5, no test tones are output.

• If an ERROR screen appears, see “If an error screen appears” on page 26.

• If a WARNING screen appears, see “If a warning screen appears” on page 27.

You can display the detailed result information by using d and ENTER to select “RESULT”. In the detailed result information screen, you can switch information by pressing

u / d / j / i.

■ If an error screen appears

Use u / d / j / i to select RETRY or EXIT, then press ENTER.

ERROR

.E-9:USER CANCEL .

.Don't operate .any function.

.>RETRYEXIT

[]/[]:Up/Down [ENTER]:Enter

RETRY To retry the auto setup procedure. EXIT To exit auto setup.

7 Press j / i to select SET or CANCEL, then

press ENTER to return to the SET MENU screen.

RESULT:EXIT

WARNING (3) RESULT  SP : 5/4/0.1  DIST: 10.0/ 12.0ft  LVL : -9.0/ +6.5dB

.>SET CANCEL

[]/[]:Up/Down [ENTER]:Enter

SET To apply the auto setup (YPAO)

settings.

CANCEL To cancel the auto setup (YPAO)

without making any changes.

If you are not satisfied with the result or want to manually adjust each setup parameter, use the manual setup parameters (see page 59).

Notes

• If E-10 appears during testing, restart the procedure from step 3.

• To cancel the auto setup procedure before completion, press u.

+ 73 hidden pages