Yamaha CD-S2100 Owners Manual

Compact Disc Player

Lecteur Compact Disc

OWNER’S MANUAL

MODE D’EMPLOI

A Living Tradition in Sound

A piano comes into this world through the perfect synergy of advanced technical skill and artistry. Such a piano can create sound that truly reflects the player’s feelings.

The final stage in piano production is called “voicing”. It is here that the instrument is given its soul.

A highly skilled expert concentrates his mind and sensitivity on the sound of each key, finely adjusting the dynamic feel of the hammers, bringing the tone and vibrancy of all 88 keys together perfectly; a truly stunning achievement. It is a quality of sound that can only be determined by an astute, sensitive ear. We apply this very same concept to the manufacture of our audio products. The technician performs exhaustive listening tests and every component is considered, in order to finally achieve the ideal sound.

Yamaha’s tradition of audio quality stretches back over 125 years, and continues to live on in all Yamaha products today.

2 En

NP-S2000

Soavo-1

NS-10M

A-S3000

CD-S3000

NS-20

CA-1000

NS-690

B-1

PX-2

C-2

NS-1000M

A-1

B-6

B-2x

MX-10000

CX-10000

Excellence in Audio Achievement

First HiFi System introduced in 1920

We introduced numerous HiFi components (turntables, FM/AM tuners, integrated amplifiers, preamplifiers, power amplifiers and speakers) in 1955 - 1965.

Natural Sound Speaker Series introduced in 1967

NS-20 Monitor Speaker

CA-1000 Integrated Amplifier

Featuring A-Class operation, the CA-1000 set the standard for integrated amplifiers.

NS-690 Natural Sound Speaker NS-1000M Monitor Speaker

A truly legendary speaker still revered by HiFi enthusiasts.

B-1 Power Amplifier

An innovative power amp that used vertical FETs in all stages.

C-2 Control Amplifier

Received top prize at the Milan International Music and HiFi Show.

NS-10M Studio Monitor Speaker

Became of the most popular studio monitors in the world.

A-1 Integrated Amplifier PX-2 Turn ta bl e

Yamaha’s first straight arm turntable.

B-6 Power Amplifier

Pyramid-shaped power amplifier.

GT-2000/L Tu rn ta bl e First CD Player (CD-1) introduced in 1983

B-2x Power Amplifier MX-10000 Power Amplifier and

CX-10000 Control Amplifier

Redefined the capabilities of separate components.

AX-1 Integrated Amplifier

GT-CD1 CD Player MX-1 Power Amplifier and

CX-1 Preamplifier

Soavo-1 and Soavo-2 Natural Sound

Speaker Systems

A-S2000 Integrated Amplifier and CD-S2000 CD Player

NP-S2000 Network Player A-S3000 Integrated Amplifier and

CD-S3000 CD Player

English

3 En

◆ Full-stage balanced signal transmission beginning with the DAC

achieves the ultimate in CD reproduction

◆ Independent power supplies with digital and analog completely

separated

◆ Exclusive Yamaha loading mechanism and high precision CD drive

◆ Left-right symmetrical design with rigid, stable construction

◆ Pure Direct

◆ Super sound from Super Audio CDs

◆ Heavy feet with newly-developed antivibration spikes

◆ DSD playback via 192 kHz, 24-bit USB DAC

■ Supplied accessories

Please check that you have received all of the following parts.

• Power cable

• Remote control

• Batteries (AAA, R03, UM-4) (×2)

• Stereo pin cable

• SAFETY BROCHURE

Controls and functions.......................................................................................................................................... 6

Connections.......................................................................................................................................................... 18

Playback of music files stored on a PC.............................................................................................................. 22

Specifications ....................................................................................................................................................... 26

Playable disc format............................................................................................................................................ 27

Troubleshooting................................................................................................................................................... 29

■ About this manual

• y indicates a tip for your operation.

• Photographs and illustrations are for explanatory purposes, and may differ from the actual unit.

• Read the “SAFETY BROCHURE” before using this unit.

4 En

CONTROLS AND FUNCTIONS

Controls and

functions

In this chapter, you will learn the controls and functions of CD-S2100.

5 En

Controls and functions

DISC USB

SOURCE

OPTICAL

STANDBY/ON

OFF

PURE DIRECT

SOURCE

LAYER

SA-CD CD

COAXIAL

SA-CD HYBRID

TRACK TOTAL REMAIN PROG SHUFFLE REPOFF S ALL

2 41 3 5 6 7 8

■ Front panel (pages 6 to 9)

1 STANDBY/ON, OFF switch

Turns on or off this unit.

STANDBY/ON (upper position): In this position,

you can select STANDBY or ON, using the p CD key on the remote control.

OFF (lower position): The power of this unit is

turned off.

Notes

• When you turn on this unit, it will take a few seconds before this unit can reproduce sound.

• If this unit is not operated for 30 minutes with no audio signal detected, it goes to STANDBY mode (page 14).

• If you disconnect the power cable from the AC outlet and connect it again when this unit is in STANDBY mode, the power of the unit is turned on (page 20). If the unit is not to be operated for a long time, set the STANDBY/ON, OFF switch to OFF.

6 En

2 STANDBY/ON indicator

Lit brightly: Shows that the power of the unit is ON.

In this condition, you can switch the unit to STANDBY mode by pressing the p CD key on the remote control.

Lit dimly: Shows that the unit is in STANDBY mode.

In this condition, you can switch the unit on by pressing the p CD key on the remote control.

Off: Shows that the power of the unit is OFF. In this

condition, you can turn the power on only by pressing the STANDBY/ON, OFF switch on the front panel.

3 PURE DIRECT key

(coaxial digital input) (optical digital input)

Allows you to enjoy high audio quality.

• Press this key again to turn off the PURE DIRECT mode.

• This setting is retained even if you turn off this unit.

5 SOURCE key

Selects the audio source to be played back. Each time you press this key, the audio source is switched.

The audio source setting is retained even if you turn off this unit.

6 LAYER key

Switches the playback layer of a hybrid Super Audio CD between SA-CD and CD while playback is stopped (page 27).

This setting is retained even if you turn off this unit.

Note

When SA-CD layer is selected, audio signals are output only from the BALANCED OUT and ANALOG OUT jacks.

7 LAYER indicators

The indicator of the layer selected with the LAYER key lights.

8 SOURCE indicators

The indicator of the audio source selected with the SOURCE key lights.

Notes

When PURE DIRECT is on:

• The audio signals are output only from the BALANCED OUT jacks and the ANALOG OUT jacks.

• The front panel display will show only the minimum indicators and messages.

4 PURE DIRECT indicator

Lights when the PURE DIRECT mode is turned on.

English

7 En

Controls and functions

DISC USB

SOURCE

OPTICAL

STANDBY/ON

OFF

PURE DIRECT

SOURCE

LAYER

SA-CD CD

COAXIAL

F G

SA-CD HYBRID

TRACK TOTAL REMAIN PROG SHUFFLE REPOFF S ALL

■ Front panel (pages 6 to 9)

9 Remote control sensor

Receives signals from the remote control.

0 Display

The brightness can be adjusted with the DIMMER key on the remote control (page 12).

A (playback) / (pause) indicator

Lights in the playback/pause mode.

B Disc type indicator

Indicates the type (SA-CD/CD/HYBRID) of the disc in the disc tray.

C Time display mode indicator

Indicates the time display mode of the display. Change the mode by pressing the DISPLAY key on the remote control (page 13).

TRACK: Elapsed time of the current track TRACK REMAIN: Remaining time of the current

TOTAL REMAIN: Total remaining time of the disc

D Playback mode indicator

Indicates the current playback mode.

PROG: Program playback (page 14) SHUFFLE: Shuffle playback (page 13) REP OFF: Repeat playback off (page 12) REP S : Single repeat playback (page 12) REP ALL: All repeat playback (page 12)

E Information display

track

8 En

F Disc tray

I J

Loads a disc.

I (Play) key

Starts playback.

G (Open/Close) key

Opens or closes the disc tray.

The disc tray also closes automatically when you press:

• the (Play) key on the front panel or on the remote control.

• the front edge of the disc tray gently.

• a numeric button on the remote control.

H (Skip/Search backward) key

Press the key once to skip back to the beginning of the current track. Press it twice to skip to the beginning of the previous track. Press and hold it to search backward.

(Skip/Search forward) key

Press the key once to skip to the next track. Press and hold it to search forward.

J (Pause) key

Pauses playback. Press the or key to resume playback.

K (Stop) key

Stops playback.

See page 28 for more information on MP3/WMA playback.

English

9 En

Controls and functions

SYSTEM CONNECTOR

REMOTE

IN OUT

BALANCED OUT DIGITAL IN

COAXIAL

OPTICOPTICALUSB

ANALOG OUT BALANCED OUT

GND +HOT

- COLD

231

3 4 5

1 2

■ Rear panel

See page 18 for connection information.

1 BALANCED OUT jacks (male)

2 ANALOG OUT jacks

3 DIGITAL IN USB jack (Type B)

4 DIGITAL IN OPTICAL jack

5 DIGITAL IN COAXIAL jack

6 DIGITAL OUT OPTICAL jack

7 DIGITAL OUT COAXIAL jack

Note

While playing the SA-CD layer, the audio signals are output only from the BALANCED OUT and ANALOG OUT jacks.

8 SYSTEM CONNECTOR

Use this connector to connect a product testing device for servicing.

9 REMOTE IN/OUT jacks

Use these jacks to connect an external component for remote operation. For details on the connection, see page 21.

10 En

0 AC IN inlet

COAXIAL

DIGITAL OUT

OPTICAL

6 7

AC IN

Spike

Transport tape Magnet

foot

Use this inlet to plug in the supplied power cable. See page 20 for connection information.

A Foot

The feet of this unit include built-in spikes. Using the spikes can reduce the effect of vibrations on the set. When using the spikes, remove the transport tape, then remove the magnet foot by pulling it.

Caution

• Take care that the magnet foot is not accidentally swallowed by small children.

• When using the feet’s built-in spikes, the spikes may scratch the shelf or floor on which this unit is installed. Use the magnet feet or appropriate supports when placing this unit on expensive furniture, etc.

If this unit is unstable, you can adjust the foot height by rotating it.

English

11 En

Controls and functions

AMP CD

OPEN/CLOSE

DIMMER PURE DIRECT

DISPLAY

INPUT

ENTER0 CLEAR

PROGRAMREPEAT SHUFFLE

MUTE

SOURCE LAYER

VOLUME

Max (brightest) Level 1 (default)

Level 2 Level 3 (darkest)

■ Remote control

3 OPEN/CLOSE key

Opens or closes the disc tray.

4 p AMP key

Turns the Yamaha amplifier ON or switches it to STANDBY mode.

Note

Some Yamaha amplifiers cannot be controlled with the p AMP key of this remote control.

5 DIMMER key

Selects the brightness level for the front panel display. Each time you press the DIMMER key, the brightness level changes in the following order:

This setting is retained even if you turn off this unit.

6 Numeric buttons

Use to select a track directly.

Note

This operation is ineffective for MP3 or WMA discs.

7 REPEAT key

Repeats playback of a single track or all tracks. Each time you press the REPEAT key during playback, the repeat playback mode changes as follows:

REP OFF (repeat playback off):

Repeat playback is cancelled.

REP S (single repeat playback):

On reaching the end of the current track, playback repeats from the beginning of the current track.

REP ALL (all repeat playback):

On reaching the end of the last track, playback repeats from the beginning of the first track.

1 Infrared signal transmitter

Sends infrared signals to this unit.

2 p CD key

Turns this unit ON or switches it to STANDBY mode. For details on STANDBY, see “Front panel” (page 6).

12 En

Note

This operation is ineffective for MP3 or WMA discs.

PROGRAM key

Turns on or off the program playback mode. See “Program playback” (page 14).

SHUFFLE key

(coaxial digital input) (optical digital input)

Performs shuffle playback.

Notes

• This operation is ineffective for MP3 or WMA discs.

• The shuffle playback mode is cancelled when playback is stopped or the disc is ejected.

A DISPLAY key

Switches the time display. Each time you press the DISPLAY key during playback, the time display changes as follows:

TRACK: Elapsed time of the current track

TRACK REMAIN:

Remaining time of the current track

8 (Search backward) key

(Search forward) key

Searches tracks backward/forward.

(Pause) key

Pauses playback. Press the or key to resume playback.

(Play) key

Starts playback.

(Skip backward) key

Press the key once to skip back to the beginning of the current track. Press it twice to skip to the beginning of the previous track.

(Skip forward) key

Press the key once to skip to the next track.

(Stop) key

Stops playback.

9 SOURCE key

Selects the audio source to be played back. Each time you press this key, the audio source is switched as shown below.

TOTAL REMAIN: Total remaining time of the disc

B ENTER key

Confirms a track number entered when you are programming tracks.

CLEAR key

Erases the last programmed track when this unit is in the program editing mode. See “Program playback” (page 14).

To erase all programmed tracks, press the CLEAR key while programmed playback is stopped.

C LAYER key

Switches the playback layer of a hybrid Super Audio CD between SA-CD and CD while playback is stopped (page 27).

This setting is retained even if you turn off this unit.

Note

When SA-CD layer is selected, audio signals are output only from the BALANCED OUT and ANALOG OUT jacks.

D Yamaha amplifier operation keys

Operates the Yamaha amplifier. Refer to the owner’s manual of your amplifier for details.

The audio source setting is retained even if you turn off this unit.

0 PURE DIRECT key

Allows you to enjoy high audio quality.

• Press this key again to turn off the PURE DIRECT mode.

• This setting is retained even if you turn off this unit.

Notes

When PURE DIRECT is on:

• The audio signals are output only from the BALANCED OUT jacks and the ANALOG OUT jacks.

• The front panel display will show only the minimum indicators and messages.

Note

Some Yamaha amplifiers cannot be controlled with the keys of this remote control.

English

See page 28 for more information on MP3/WMA playback.

13 En

Controls and functions

■ Program playback

In the program playback mode, you can play back tracks in a programmed sequence.

1 Press PROGRAM while playback is stopped.

This unit is set to the program editing mode.

2 Select a track by using the numeric buttons

and press ENTER.

3 Repeat step 2 to program the next track.

You can program up to 24 tracks.

4 Press the p (Play) key.

Playback starts from the beginning of the programmed sequence.

Notes

• This operation is ineffective for MP3 or WMA discs.

• The programmed tracks are erased in the following cases: – when the disc is ejected – when this unit is turned off or goes to STANDBY mode – when an audio source other than the disc is selected – when the playback layer of a hybrid Super Audio CD is

switched between SA-CD and CD

■ Setting the AUTO POWER STANDBY function

The AUTO POWER STANDBY function can be set to ON or OFF. When set to ON, if the unit is not operated for 30 minutes with no audio signal detected, it automatically goes to STANDBY mode. When set to OFF, the unit does not go to STANDBY mode automatically.

1 Open the disc tray and remove any currently-

loaded disc from the unit.

Skip step 1 to 3 if “NO DISC” appears on the information display.

2 Close the disc tray.

3 Press SOURCE to select “DISC” as the audio

source.

“NO DISC” appears on the information display.

4 Press and hold the (Stop) key or (Play)

key on the front panel for about 2 seconds to switch the setting.

(Stop) key: The AUTO POWER STANDBY

function switches to ON, and “AutoSTBY ON” appears on the information display.

(Play) key: The AUTO POWER STANDBY

function switches to OFF, and “AutoSTBY OFF” appears on the information display.

14 En

Notes

• The default setting for the AUTO POWER STANDBY function

is ON.

• This setting is retained even if you turn off this unit.

■ Setting the DPLL (Digital Phased Lock

Lowest

Low

Med-Low

Medium

Med-Hi

High

Highest

(default)

Loop) bandwidth

The audio DAC (ES9016) of this unit employs DPLL to generate accurate clock signals synchronized with the clock of the input digital audio signal. The 7-step DPLL bandwidth setting gives the unit tolerance for fluctuation of the clock of the input digital signal and adjustment of the accuracy of the operating clock in the DAC.

1 Press SOURCE to select the audio source to

be played back.

The DPLL bandwidth can be set for each audio source, respectively.

2 Within 5 seconds after selecting the audio

source, press ENTER.

The unit enters the setting mode, and the DPLL bandwidth currently set appears on the information display.

3 Select the DPLL bandwidth using the

(pause) key and the (stop) key.

Each time the (pause) key is pressed, the bandwidth changes in the following order. If you press the (stop) key, it changes in reverse order.

4 Press ENTER.

The setting value flashes for 3 seconds, then the unit resumes to normal mode. To cancel the setting, press CLEAR.

Notes

• As the DPLL bandwidth setting value approaches “Lowest,” the accuracy of the operating clock in the DAC improves, but the unit may be susceptible to a change in the clock of the external component. The sound from such a component may more easily skips.

• As the DPLL bandwidth setting value approaches “Highest,” the accuracy of the operating clock in the DAC deteriorates, but the unit is far less susceptible to a change in the clock of the external component, and the sound from such a component hardly skips.

English

15 En

Controls and functions

Approximately 6 m (20 ft)

■ Installing batteries in the remote control

1 Remove the battery compartment cover.

2 Insert the two batteries (AAA, R03, UM-4)

according to the polarity markings (+ and -) on the inside of the battery compartment.

3 Reinstall the battery compartment cover.

■ Operating range of the remote control

30 30

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the front panel of this unit during operation.

16 En

Connections

In this section, you will make connections between CD-S2100 and your amplifier.

Connections

SYSTEM CONNECTOR

REMOTE

IN OUT

BALANCED OUT ANALOG OUT BALANCED OUT

GND +HOT

- COLD



If your amplifier is equipped with XLR balanced input jacks, we recommend balanced connection for optimum audio performance.

When the SA-CD layer is played, the audio signals are output only from the BALANCED OUT and ANALOG OUT jacks.

XLR balanced cable Stereo pin cable

Amplifier

18 En

AC IN

DIGITAL IN

COAXIAL COAXIAL

DIGITAL OUT

OPTICALOPTICALUSB

Coaxial digital cable

Optical

digital cable

USB cable (Type B)

Component equipped with a

digital output (PCM) jack

Only PCM signals can be input to the DIGITAL IN (OPTICAL/COAXIAL) jacks of this unit. For details on the supported PCM signals, see page 26.

Note

Coaxial digital cable

Optical

digital cable

AV receiver equipped with a

digital input jack

English

19 En

Connections

1: ground 2: hot

3: cold

“Female” XLR connector

“Male” XLR connector

Latch lock

AC IN

Supplied power cable

to an AC outlet

Rear panel of CD-S2100

■ Connecting to the BALANCED OUT jacks

Connect your amplifier with the XLR balanced input jacks. The pin assignments for these jacks are shown below. Refer to the owner’s manual supplied with your amplifier and verify that its XLR balanced input jacks are compatible with the pin assignments.

When connecting, be sure to match the pins and insert the connector of the “female” XLR balanced cable. When disconnecting, pull out the “female” XLR balanced cable while pressing down the latch lock on the plug.

■ Connecting the power cable

Plug the power cable into the AC IN inlet when all connections are complete, and then plug in the power cable to the AC outlet.

20 En

+ 44 hidden pages

Yamaha CD-S2100 Owners Manual

Contents

CONTROLS AND FUNCTIONS

Controls and functions

Connections

Connections