ELECTRIC GUITAR
AES820 D6
SERVICE MANUAL
The AES820 D6 service manual provides a listing of
only the differences as compared with the AES820. You
must have a AES820 service manual (EG 011618 )
before servicing this unit.
The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and Welfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR
MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.
This document is printed on chlorine free (ECF) paper with soy ink.
WARNING : CHEMICAL CONTENT NOTICE!
CONTENTS
PARTS LIST.............................................................................. 2
SPECIFICATIONS..................................................................... 2
EG
011619
0.768K-66 Printed in Japan ’02.01
HAMAMATSU, JAPAN
AES820 D6
PARTS LIST
REF NO.
PART NO. DESCRIPTION REMARKS
A01 Neck Assembly (BL)
*
Scale Length..............................666.8mm
Body-Neck Construction .........Bolt On
Length........................................1033.8mm
Width .........................................343.6mm
Net Weight ................................ 3.7kg
Body
BL ............................................. Black
LBM ......................................... Light Brown Metallic
FLB........................................... Flat Blue
Neck
BL ............................................. Black
Material......................................Alder
Body Depth ............................... 44mm
Material......................................Rose
Fingerboard Width ................... 0-F 44.0mm, 12-F 52.5mm
No. of Frets................................ 24
Material......................................Maple
Neck Thickness ........................ 1-F 21.9mm, 12-F 23.9mm
Hardware ................................... Chrome Plated
Nut..............................................Urea
Bridge ........................................ Ping Well: TP6-05Y (Chrome)
Strings........................................ D’addario: #59200
Volume ....................................... 15A 500KΩ x 2
Rotary Switch ............................ 2 pole 3 position
Pickup Switch............................ 3 position Toggle Switch
Front/Rear ................................Humbucking
Magnet
Front/Rear ..............................Ferrite
AAX33290
A01a Seal (QC66520)
E34 Strings D’addario #59200 1set (QC59200)
: New Parts RANK: Japan only
SPECIFICATIONS
STANDARD SPECIFICATIONS
COLOR
BODY
FINGERBOARD
NECK
PARTS
CONTROLS
PICKUPS
OVERALL ASSEMBLY AES820 D6
--
--
QTY
RANK
2