YAMAHA 01V96 Editor owner's Manual

01V96 Editor

Owner’s Manual

Getting Started

Special Notices

•The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation.

•Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer.

•Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly prohibited except for your personal use.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software.

•This disc is a CD-ROM. Do not attempt to play the disc on an audio CD player. Doing so may result in irreparable damage to your audio CD player.

•The screen displays as illustrated in this owner’s manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer.

•Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced separately.

•The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies.

Yamaha Pro Audio Global Site

http://www.yamahaproaudio.com/

Getting Started ......................................... 2

Overview of 01V96 Editor .................................... 2

Configuring 01V96 Editor .................................... 2

Synchronizing 01V96 Editor ................................ 4

Offline Edit Function ............................................ 4

Working with Sessions ......................................... 4

Undo/Redo Function ........................................... 5

Other Functions .................................................... 6

Using 01V96 Editor Windows ................... 7

Master Window .................................................... 7

Layer Windows ..................................................... 8

Selected Channel Window ................................. 14

Library Window .................................................. 21

Patch Editor Window ......................................... 23

Surround Editor Window .................................. 28

Effect Editor Window ......................................... 29

Meter Window .................................................... 31

Keyboard Shortcuts ................................ 32

Index ....................................................... 33

*Speciﬁcations and descriptions in this owner ’s manual

are for information purposes only. Yamaha Corp. reserves the right to change or modify products or speciﬁcations at any time without prior notice. Since speciﬁcations, equipment or options may not be the same in every locale, please check with your Yamaha dealer.

Windows

WindowsKeyboard Shortcuts

Using 01V96 Editor

Index

Description of menus and buttons

In the event that menu and button names on a Windows system are different from those on a Macintosh, this manual uses the Windows menu and button names followed by the Macintosh menu and button names in parentheses.

01V96 Editor—Owner’s Manual

❏

Getting Started

Overview of 01V96 Editor

01V96 Editor enables you to remotely control the Yamaha 01V96 mixing console and to save the parameter settings on your computer. To use 01V96 Editor, you must ﬁrst perform the following operations:

Start and conﬁgure Studio Manager.

Start and conﬁgure 01V96 Editor.

Synchronize 01V96 Editor with your 01V96 console (see page 4).

For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.

Conﬁguring 01V96 Editor

You must conﬁgure the following settings for each open Editor.

Note:

•Specify MIDI ports in the Setup window of Studio Manager before making the following settings.

•To open each Editor, double-click the icon of the console or device you want to edit.

System Setup

To open the System Setup window, choose [System Setup] from the [File] menu.

Be sure to specify the Input port and Output port.

Getting Started

Windows

Using 01V96 Editor

Keyboard Shortcuts

Input port/Output port: From the ports you speciﬁed in Studio Manager, select the ports that

the editor will use to communicate with the 01V96 console.

Console Device ID: 01V96 Editor can control any one of up to eight 01V96 consoles, each with

its own exclusive ID. Select the ID of the console you want to control.

Index

01V96 Editor—Owner’s Manual

❏

Channel Select: These options determine whether or not channel selection is linked. When the

PC->Console option is on, selecting a channel in 01V96 Editor selects the same channel on the console. When the Console->PC option is on, selecting a channel on the console selects the same channel in 01V96 Editor.

Conﬁrmation: These options determine whether or not a conﬁrmation dialog box appears

when storing, recalling, or patching.

Layer Select: These options determine whether or not Layer selection is linked. When the

PC->Console option is on, selecting a Layer in 01V96 Editor selects the same Layer on the console. When the Console->PC option is on, selecting a Layer on the console selects the same Layer in 01V96 Editor.

Window Control from Console: This option determines whether or not using the USER

DEFINED KEYS on the console enables you to remotely open and close the 01V96 Editor windows.

Level Meter: This option determines whether or not the level meters in 01V96 Editor are

enabled.

Console Setup

Getting Started

Windows

Using 01V96 Editor

To open the Console Setup window, choose [Console Setup] from the [File] menu.

Surround Mode: Select a Surround mode from STEREO, 3-1, 5.1, and 6.1.

Pair Mode: These options determine whether the fader pair is Horizontal or Vertical.

Channel Copy Parameter: Select desired parameters to copy from channel to channel.

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Synchronizing 01V96 Editor

When 01V96 Editor starts up, the parameter settings on the console and the parameter settings in 01V96 Editor may be different. Therefore, you must ﬁrst match the parameter settings on the console with those in 01V96 Editor. This operation is called “synchronization.” Follow the steps below to synchronize 01V96 Editor.

Select [Synchronize], then [Total Recall...].

The following window opens.

Select whether you want to transfer your settings to 01V96 Editor, or vice versa.

At this time, the All Libs option determines whether or not Scene and Library data is synchronized.

PC -> Console: Tr ansfers the current parameter settings in 01V96 Editor to your console.

Console -> PC: Tr ansfers the current parameter settings of your console to the 01V96 Editor.

Click [OK].

Getting Started

Windows

Using 01V96 Editor

Do not operate the console while synchronization is in progress.

Note: If you use the “Total Recall” function in Studio Manager, all selected Editors in Studio Manager

are synchronized with the corresponding devices.

Ofﬂine Edit Function

If you do not want to synchronize your console with 01V96 Editor, select [Ofﬂine Edit] from the [Synchronization] menu. To apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC->Console option to synchronize the console with 01V96 Editor.

The Ofﬂine Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the Master window.

Note: Some effect parameters in the console change their displayed values depending on the sampling

frequency. If you switch 01V96 Editor from OFFLINE to ONLINE, displayed parameter values may change because 01V96 Editor loads the sampling frequency from the console and updates the display.

Working with Sessions

All of your console’s mix settings in 01V96 Editor, including Scene and library data, are called Sessions. The following table describes how to handle Sessions.

Keyboard Shortcuts

Index

Creating a new Session Choose [New Session] from the [File] menu.

Opening a previously saved Session Choose [Open Session] from the [File] menu.

Saving the current Session Choose [Save Session] from the [File] menu.

Saving the current Session with a new name Choose [Save Session] As from the [File] menu.

Note: In order to save the settings of an optional Y56K card, in a Session, you must ﬁrst resynchronize

01V96 Editor by selecting the Console->PC option.

01V96 Editor—Owner’s Manual

If you save a Session in an Editor, only that Editor’s settings are saved in a ﬁle. The Editor’s settings are saved in either the Studio Manager V2 format (ﬁle extension “.YSE”) or a format that is compatible with earlier versions of Studio Manager (ﬁle extension “.01X”). Note that earlier versions of Studio Manager cannot open a Session saved in the “.YSE” format.

If you save a Session in the Studio Manager window, all selected Editor settings are saved in a ﬁle with a ﬁle extension of “.YSM.”

Undo/Redo Function

In 01V96 Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest operation (Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you perform an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can cancel multiple recent operations. The following table describes how to use the Undo/Redo function.

Undo Choose [Undo] from the [Edit] menu.

Getting Started

Windows

Using 01V96 Editor

Redo Choose [Redo] from the [Edit] menu.

Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo any previous operation:

•Operations on the console

•Closing Studio Manager

•Changing Surround mode (Stereo/3-1/5.1/6.1)

•Changing Pair mode (Horizontal/vertical)

•Synchronizing the console with 01V96 Editor

•Creating a new Session

•Saving a Session

•Copying and pasting a channel

•Creating or cancelling a channel pair

•Storing or recalling a scene or library

•Turning on or off the GATE: [LINK] button in the Selected Channel window

•Turning on or off the COMPRESSOR: [LINK] button in the Selected Channel window

•Turning on or off the [LINK] button in the Surround Editor window

•Changing Aux Send mode (Fixed/variable) on the console

•Changing the sampling frequency (operated on the device)

•Changing the User Assignable Layer settings (operated on the device)

Keyboard Shortcuts

Index

Note: Yo u cannot Undo or Redo the following operations:

•Edits in the Setup window

•Synchronization

•Opening and closing the windows

•Resizing the windows

Note: In the Library window, you can Undo or Redo only the most recent operation. You cannot cancel

the preceding operations.

01V96 Editor—Owner’s Manual

Other Functions

Copy & Paste Function

You can copy and paste the channel parameters.

In the Console Setup window (page 3), you can also specify the parameters to be copied.

The following table describes how to use the Copy & Paste function.

Copying a channel Right-click (<control>+click) a copy source channel, then choose [Copy].

❏

Getting Started

Pasting a channel

Right-click (<control>+click) the copy destination channel, then choose [Paste].

Resetting to the default value (Ctrl ( ) + click)

Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to – reset a pan setting to Center).

∞

, or

Ctrl( )+Shift+Click

Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and <Shift> key and click the mouse button to reset the value to the nominal level.

Windows

Using 01V96 Editor

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Using 01V96 Editor Windows

Master Window

The Master window enables you to switch between layers and control Stereo Out signals. To open this window, choose [Master] from the [Windows] menu.

[ONLINE]/[OFFLINE] button

Repeatedly clicking this button toggles between online and ofﬂine status.

Note: If 01V96 Editor is not connected or is not communicating with the 01V96,

clicking this button will not switch the unit from ofﬂine to online.

Meters

These meters display the output level of the Stereo Out when Surround mode is set to “STEREO,” or the Bus Outs used for surround processing when Surround mode is set to 3-1, 5.1 or 6.1. The meters in 3-1, 5.1 and 6.1 Surround modes are shown on the right.

This indicator is displayed when 01V96 Editor is connected to the 01V96 correctly. If the connection is correct, the 01V96 Editor parameters will work in unison with the 01V96 parameters.

This indicator is displayed when 01V96 Editor is not connected or is not communicating with the 01V96, or when you have selected Ofﬂine Edit. If the connection is incomplete, the 01V96 Editor parameters will not work in unison with the 01V96 parameters.

Getting Started

Windows

Keyboard Shortcuts

LAYER buttons

These buttons are used to select the Layers.

PAN CONTROL

These buttons are used to select either “STEREO” (Stereo display mode) or “SURR” (Surround display mode). The Pan control on the Input Channels is a rotary control when “STEREO” is selected, and a dot on a pan graph when “SURR” is selected. If Surround mode is set to Stereo, the [SURR] button will be disabled.

Scene number display

This display indicates the currently-recalled scene’s number.

[SELECT] button

This button is used to select the Stereo Out.

[ON] button

This button turns the Stereo Out on and off. It appears orange while the Stereo Out is on.

Master fader

This is the Stereo Out fader.

Fader value indicator

This indicator indicates the fader position in decibels (dB).

3-1 5.1 6.1

Index

01V96 Editor—Owner’s Manual

❏

Layer Windows

The Layer window displays 16 channel strips. You can select a layer using the LAYER buttons in the Master window. To open the Layer window, choose [Layer] from the [Windows] menu.

Note:

•You can selectively turn on or off some of channel strips by using the [View] menu.

•You can open multiple Layer windows by choosing [Windows] menu -> [Layer] -> [Additional View]. The titles of these windows will indicate [Locked]. Windows that are indicated as [Locked] will not reﬂect layer changes made on the console or in the Master window. If you want the Layer windows to reﬂect the changes, right-click each window (Macintosh: <control> + click), then select the desired layer using the LAYER buttons.

Input Channels

Selecting the 1-16 or 17-32 button in the Master window displays the corresponding

Input Channel strips.

SOURCE parameter

This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears.

Routing buttons

These buttons are used to route the Input Channel to the Bus Outs.

[STEREO] button

This button is used to route the Input Channel’s signal to the Stereo Out.

[DIRECT] button

This button turns on and off the Input Channel’s routing to its Direct Out.

Direct Out parameter

This parameter is used to select the Direct Out destination. To select a destination, click the parameter and choose from the list that appears.

Getting Started

Windows

Using 01V96 Editor

Keyboard Shortcuts

[PHASE] button

This button is used to reverse the signal phase of the channel.

[INSERT] button

This button is used to turn on and off the Input Channel’s Insert.

[GATE] button

This button is used to turn on and off the Input Channel’s Gate.

Gate open/close indicators

These indicators display whether the Gate is open (green) or closed (red).

Gate threshold

This displays the Gate Threshold, which can be set by dragging.

[COMP] button

This button is used to turn on and off the Input Channel’s Compressor.

Compressor curve

This display shows the Compressor’s curve.

[EQ] button

This button is used to turn on and off the Input Channel’s EQ.

EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

[DELAY] button

This button is used to turn on and off the Input Channel’s Delay function.

Index

01V96 Editor—Owner’s Manual

P Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be set by dragging.

Q Channel number

This is the channel number. Double-click the channel number to open the Selected Channel window.

R AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux Send level, drag its bar or click a point along the length of the bar. To turn an Aux Send on or off, click its number.

The following table shows how the Aux Send controls appear depending on the Aux Send On/Off and Pre/Post settings. Aux Sends can be set to pre-fader or post-fader on the Selected Channel window (see “AUX

SEND section” on page 15).

Getting Started

Windows

Aux Send status Appearance

On or off but no level set Dark blue bar

Off, pre-fader Green bar outline displays level

On, pre-fader Green bar displays level

Off, post-fader Orange bar outline displays level

On, post-fader Orange bar displays level

S Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send, the Aux Send level in dB.

T PAN control

This control is used to set the Input Channel’s stereo or surround pan position. When the PAN CONTROL in the Master Window is set to “STEREO,” the Pan control appears as a rotary control, and when set to “SURR,” the control appears as dot on a pan graph. The surround pan position can be set by dragging the dot.

U LFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the surround LFE Channel level. It appears when the PAN CONTROL in the

Master Window is set to “SURR.” To set the Channel level, drag the end of its bar or click a point along the length of the bar.

V [SELECT] button

This button is used to select the Input Channel.

Using 01V96 Editor

Keyboard Shortcuts

Index

W [SOLO] button

This button solos the Input Channel. It appears orange while the channel is soloed.

X [ON] button

This button turns the Input Channel on and off. It appears orange while the channel is on.

Y Short channel name

This is the channel’s short name. To edit the name, click it and type.

Z Channel fader and channel meter

This is the Input Channel fader. The channel meter to the right of the fader displays the Input Channel signal level.

a Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

01V96 Editor—Owner’s Manual

❏ Stero Input Channel

A SOURCE parameter

This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears.

B Routing buttons

These buttons are used to route the Input Channel to the Bus Outs.

Getting Started

E F

N O

C STEREO button

This button is used to route the Input Channel’s signal to the Stereo Out.

D PHASE button

This button is used to reverse the signal phase of the channel.

E EQ button

This button is used to turn on and off the Input Channel’s EQ.

F EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

G Channel number

This is the channel number. Double-clicking this will open the Selected Channel window.

H AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux Send level, drag its bar or click a point along the length of the bar. To turn an Aux Send on or off, click its number.

SEND section” on page 15).

Aux Send status Appearance

On or off but no level set Dark blue bar

Windows

Using 01V96 Editor

Keyboard Shortcuts

Index

Off, pre-fader Green bar outline displays level

On, pre-fader Green bar displays level

Off, post-fader Orange bar outline displays level

On, post-fader Orange bar displays level

I Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send, the Aux Send level in dB.

J PAN control

This control is used to set the Input Channel’s stereo or surround pan position. When the PAN CONTROL in the Master Section is set to “STEREO,” the Pan control appears as a rotary control, and when set to “SURR,” the control appears as dot on a pan graph. The surround pan position can be set by dragging the dot.

K LFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the surround LFE Channel level. It appears when the PAN CONTROL in the Master Section is set to “SURR.” To set the LFE level, drag the end of its bar or click a point along the length of the bar.

L SELECT button

This button switches between L and R of a stereo input channel.

01V96 Editor—Owner’s Manual

M SOLO button

This button solos the Input Channel. It appears orange while the channel is soloed.

N ON button

This button turns the Input Channel on and off. It appears orange while the channel is on.

O Short channel name

This is the channel’s short name. To edit the name, click it and type.

P Channel fader/Channel meter

This is the Input Channel’s fader. The meter at the right of the fader indicates the signal level.

Q Fader value

This indicates the dB value of the fader.

Getting Started

Windows

Using 01V96 Editor

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

+ 23 hidden pages

YAMAHA 01V96 Editor owner's Manual

Special Notices

Yamaha Pro Audio Global Site

Contents

Getting Started

Overview of 01V96 Editor

Synchronizing 01V96 Editor

Working with Sessions

Undo/Redo Function

Other Functions

Using 01V96 Editor Windows

Master Window

Layer Windows