Yale Ef-pb User Manual
Easy Fit EF-Series Alarm System
Wirefree 868MHz Yale EF-PB
Panic Button
LED
Activation/
Learn button
Cover
screw
Description:
• Activation/Learn Button (Red): Use for
activating the alarm and for learning-in.
• LED Indicator for activation and low battery.
• Knockouts for Wall / Corner Mounting
• Top & Bottom Cover securing screw
Pack contents
• 1 x Panic Button
• 2 x wall plugs/cross head xing screws.
• 1 x CR2032 battery
Programming & Installation
Programming:
Program your panic button before installation
and test afterwards. Please see your current
system instruction book.
Installation:
Undo the cover screw and insert the battery.
Please observe the battery polarity.
Location:
Locate the panic button taking into account the
following points:
• Not Clearly visible to an intruder
• Easily accessible
• Out of reach of children
• indoor use only
Mounting:
The panic button can be use free standing or wall
mounted. For wall mounting:
• Break through the two knockouts in the rear
case
• Drill holes on the wall surface using the holes as
template. Insert wall plugs and screw the cover to
the wall.
• Replace the cover and tighten case screw.
Operation
Activation:
Press and hold the red button for at least 3
seconds. LED will light momentarily and the alarm
will be activated.
Silence an Alarm:
Press and hold the red button for at least 10
seconds. LED will light momentarily and the alarm
will be silenced.
2 Year Instruction Statement:
• Silencing the alarm with the panic button
does not reset the system. If the alarm is
armed prior to activation, the system will
re-arm after being silenced with the panic
button.
Specication
Environmental conditions:
-10c to 40c , relative humidity 85% noncondensing. Indoor use only
Radio:
868MHz FM
This product is guaranteed for consumers
against faulty workmanship, materials and
function for a period of 2 years from the date
of purchase providing the full installation and
maintenance instructions are followed. Please
keep your proof of purchase safe, this must
be submitted when making a claim under this
guarantee.
Please note that it is a condition of this
guarantee that your Yale product:
• Has been correctly installed and
maintained in accordance with the
Yale installation and
maintenance instructions provided to
you at the time of purchase.
• Has not been modied or damaged in
any way.
• Has not been subjected to
unauthorized repairs.
Yale are responsible under this guarantee for
repairing the product or replacing the product
as we deem necessary. If there is fault with the
product, please contact Customer Services on
01902 364647, who will give you the name of
an expert and conrm what you need to do to
make a claim under this guarantee.
Please do not carry out any repairs without our
authority or by using an unauthorised expert.
Any repairs or other works carried out without
our authorization or by using an unauthorized
expert will not be covered under this guarantee.
Note: Waste electrical products and batteries
should not be disposed of with household waste.
Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
This guarantee is non transferrable and
applies to products purchased in the United
Kingdom only. This guarantee does not apply
to normal wear and tear. This does not affect
your statutory rights. A full copy of the product
instructions are available upon request or by
visiting our website www.yale.co.uk.
E1 09/12
RoHS
Loading...