XPiQ inc PM65-10A, PM65-12A, PM65-13A, PM65-14A, PM65-16A Datasheet

AC/DC Medical Open Frame

65 Watts

PM65 Series

Specification

Input

Input Voltage • 85 to 264 VAC
Input Frequency • 47 to 440 Hz
Input Current • 1.6 A (rms) for 115 VAC

1.0 A (rms) for 230 VAC
Safety Ground • 50 µA max at 110 VAC 60 Hz
Leakage Current • 100 µA max at 240 VAC 50 Hz

Output

Total output power: • 0 to 65 watts
Ripple and noise: • 1% pk-pk maximum
Overvoltage • Provided on output #1 only;

Protection: set at 112-132% of its nominal

output voltage

Overcurrent • All outputs protected to short
Protection: circuit conditions

Temperature • All outputs ±0.04%/°C
Coefficient: maximum

Transient Response • Maximum excursion of 4% or

better on all models, recovering
to 1% of final value 500 µs after
a 25% step load change

Line Regulation • ±0.5% max at full load

XPiQ inc.

Intelligent Design Quality Product

4000 VAC Isolation

•

100% Burn-in

Low Safety Leakage Current

Wide Input Voltage 85 to 264 VAC

Meets EMI Requirements of

Medical Equipment

Both Line and Neutral Fused for

European Requirements

General

Efficiency • 70% minimum at 65 watt output
Hold-up time • 10 msec minimum at nominal input
Inrush Current • 15 A at 115 VAC or 30 A at

Withstand Voltage • 4000 VAC from input to output

Insulation Resistance • 10 Mohm minimum from

Switching Frequency • 32 kHz (±5 kHz)

Environmental

Operating • 0 °C to +70 °C, derate linearly from
Temperature 100% load at +50 °C to 50% load

Storage • -40 °C to +85 °C
Temperature

Relative Humidity • 5% to 95% non-condensing
MTBF • 100,000 hours minimum at full load

EMC & Safety

EMI Requirement • Meets the conducted limits of

Safety Requirements • Approved to:

•

•

•

•

•

230 VAC at +25 °C cold start

1500 VAC from input to ground
500 VAC from output to ground

output to ground

at +70 °C

at +25 °C ambient

EN 55011 (CISPR11) Level B

(Not for patient contact)
a) UL2601
b) CSA C22.2 No.601.1-M90 per CUL
c) IEC 601-1/EN60601-1 (per TUV)

•

www.XPiQ.com

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

•

OUTPUT VOLTAGE & CURRENT RATINGS PM65

Maximum Output #1 Output #2 Output #3 Output #4 Model

Output Number

Power Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol.

50 W 5 V 0 A 10.0 A 2% PM65-10A

65 W 12 V 0 A 5.5 A 1% PM65-12A

65 W 15 V 0 A 4.5 A 1% PM65-13A

65 W 24 V 0 A 3.0 A 1% PM65-14A

65 W 30 V 0 A 2.5 A 1% PM65-16A

65 W 36 V 0 A 2.2 A 1% PM65-17A

65 W +5 V 1 A 6.0 A 3% +12 V 0.5 A 3 A 5% PM65-23A

65 W +5 V 1 A 6.0 A 3% +24 V 0.3 A 2 A 5% PM65-25A

65 W +5 V 1 A 6.0 A 3% +12 V 0.5 A 3 A 5% -5 V 0.1 A 0.5 A 10% PM65-30A

65 W +5 V 1 A 6.0 A 3% +12 V 0.5 A 3 A 5% -12 V 0.1 A 0.5 A 10% PM65-31A

65 W +5 V 1 A 6.0 A 3% +15 V 0.4 A 3 A 5% -15 V 0.1 A 0.5 A 10% PM65-32A

65 W +5 V 1 A 6.0 A 3% +12 V 0.5 A 3 A 5% -12 V 0.1 A 0.5 A 10% -5 V 0.1 A 0.5 A 0.1% PM65-40A

Notes

All multi-output units may be operated at no-load without damage. At no-load, output tolerance increases to 10%.

•

Pin Chart

Model 1 2 3 4 5 6 7 8

PM65-10A PM65-12A OUTPUT OUTPUT OUTPUT OUTPUT RETURN RETURN RETURN RETURN

PM65-13A PM65-14A #1 #1 #1 #1

PM65-16A PM65-17A

PM65-23A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT N.C. N.C.

PM65-25A #1 #1 RETURN RETURN #2 #2

PM65-30A PM65 -31A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT N.C.

PM65-32A #1 #1 RETURN RETURN #2 #2 #3

PM65-40A OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT OUTPUT

#1 #1 RETURN RETURN #2 #2 #3 #4

Mechanical Details

www.XPiQ.com

Notes:

1. Dimensions shown in inches (mm).

2. Tolerance 0.02 (0.5) maximum.

3. Input connector mates with Molex housing 09-50-3031 and
Molex 2878 series crimp terminal.

4. Output connector mates with Molex housing 09-50-3081
and Molex 2878 series crimp terminal.

5. Weight: 380 grams approx.

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA