User's Manual
XOMAX
ANDROID 7.1.1
1DIN / 2DIN car radio
Navigation und Multimedia
XM-VA707
XM-DA708
XM-2DA702 (L2)
XM-2DA801 (L2)
XM-2VA701 (L2)
XM-2VA901
XM-2VA1001
ENGLISH
Thank you for purchasing one of our XOMA X products! We appreciate your con-
i
XOMAX
dence. Enjoy your brand new multimedia unit!
Please read the following manual carefully before you install and use the unit.
Please save this manual in case you will need to clarify further possible ques-
tions regarding installation and usage of our product.
We are constantly trying to keep our online-library of user's manuals for our
products up-to-date. In case you miss some information or if something should
be unclear, please visit our homepage www.xomax.de/download for a current
version of user's manual or contact our customer service.
Please note: Any alternations and changes of technical data or/and design
due to technical update of some models need no advertisement.
We appreciate our environment, so to keep it safe and clean, we
do not print our manuals on paper but provide our products with
manuals in digital version created in *.pdf format.
You can nd and download them anytime on our homepage
www.xomax.de, view them on your mobile devices and print
them for yourself if needed.
Version 1.1
Last update 12.03.2018
2
Thema:
Table of contents
Table of contents
EN
Safety instructions and precautions 5
Handling by stop only ...................... 5
Installation .................................... 5
Regular loudness ............................ 5
Repair of the unit............................ 5
Power supply ................................. 5
Replacement of fuses ...................... 5
Overheating ................................... 5
Regular temperature ....................... 5
Cleaning of the unit ........................ 6
Usage of the touchscreen ................ 6
Moisture ........................................ 6
The risk of injuries .......................... 6
Handling the CDs and DVDs ............. 6
Installation 7
Installation notes ............................ 7
Before the installation ..................... 7
Basic operations 9
Functions of the buttons on the front
panel ............................................ 9
Unit on/off ....................................10
Operation on the HOME screen ........10
Home screen ..............................10
Move und delete icons on home
screen .......................................11
Change the skin for home screen ..11
Clock and date setup ...................12
Language setup ..........................12
Steering Wheel Control setup .......12
Navigation operation ...................13
Button color setup ......................13
Network setup 13
Wi-Fi setup ...................................13
3G Dongle setup ............................14
Widget and Application operation 14
Install and uninstall APP's ...............14
Install APP's ...............................14
Uninstall APP's ...........................14
Calendar Widget ............................15
Email ...........................................15
Radio operation 16
Radio Basic operation .....................16
RDS .............................................16
Stores channel ..............................17
EQ / Fader / Balance setting ............17
Bluetooth control 17
Connecting ...................................17
Registing your Bluetooth device ....17
Connecting a registered Bluetooth
manually ...................................17
Delete a registered device ...........17
Hands-Free call 18
Bluetooth setup .............................19
Playing Bluetooth Audio device ........19
Multimedia 20
3
Thema:
Table of contents
Mirror Link 22
Android USB connect......................22
iPhone WIFI connect ......................23
Setting Up 25
Connection schedule – ISO
plug 27
ISO plug conguration 28
Socket A (power supply) .................28
Socket B (loud speakers) ................28
B-connector (RCA cable connections) 29
C-connector (RCA cable connections) 29
EN
Rear view camera (optional) 30
Common information .....................30
Connection ...................................30
Start the rear view camera mode .....31
Common solutions 32
Disposal / recycling information 34
Disposal of an old unit / battery .......34
4
Thema:
Safety instructions and precautions
!
!
!
!
!
!
!
!
EN
Safety instructions and
precautions
Handling by stop only
To avoid any accidents please don't
handle the unit while you driving. Please
stop and park the vehicle at safet y
place and handle the unit casually.
Installation
Please read the following manual
carefully before you install the unit. We
recommend you to let the technician
install the unit in your vehicle.
Regular loudness
Please set the loudness of the unit to
the appropriate level so you were still
able to hear exterior noises especially
trafc warning signals. Furthermore the
higher loudness level can damage your
hearing organs.
Repair of the unit
Due to awed warranty seal the
warranty becomes invalid.
Power supply
Use the unit connected only to 12 Volt
on-board power supply. The minus (-)
should be connected with the ground
(GND) (negative).
Due to the wrong conguration exists
the danger of re. In case of doubt
please consult with professional technicians.
Replacement of fuses
While replacing the fuse please make
sure that the new fuse has the same
properties as the old one, especially the
amperage.
Overheating
Do not occlude the vent holes to avoid
the heat generation and accumulation
in the unit. Otherwise exists the danger
of re.
Do not open the unit. Do not try to
repair the unit by yourself due to any
emerging technical problems. While
opening the unit by yourself exists the
danger to be electrocuted.
Do not use the unit any further since
you detect any kind of technical
problems.
Leave all the repair operations to
professional technicians.
Regular temperature
Please make sure that the temperature
inside the vehicle amounts to not lower
-10°C or more than +40°C.
If it's too cold or hot inside the vehicle,
do not turn the unit on until the inside
temperature of the cabin increases or
descends.
5
Thema:
Safety instructions and precautions
!
!
!
!
!
Cleaning of the unit
Please keep the unit clean and remove
the dust from it regularly. Please use for
that a soft and dry cleaning rag.
Major soilings can be removed carefully
with the wet cleaning rag. Do not use
any chemical or alcohol-containing
detergents to avoid the damage of the
unit's varnish.
EN
Handling the CDs and DVDs
» Soilings, scratches, dust can impair
the playback and damage optical
lenses.
Usage of the touchscreen
Do not press the touchscreen too hard
– it may lead to image distortions, unit
malfunctions and touchscreen damages.
Do not use any sharp articles to use
the touchscreen. Please handle the
touchscreen with your nger or with the
appropriate stylus.
Moisture
To avoid the danger of re or the
electric shock do not put the unit in to
the moist environment (e.g. adverse
weather conditions, inappropriate wet
cleaning etc.)
The risk of injuries
Only for DVD models: Do not open
the cabinet or modify the unit. The
active laser components used with this
product comply with the provisions of
Laser Class 1.
» Do not label CDs/DVDs with an
inappropriate stickers and markers.
» Do not ever bend the disc.
» Store the discs in an appropriate
sleeves to avoid damages of the media.
» Do not expose discs to direct sunlight.
» Do not touch the mirror surface of
the disc to avoid the soilings such as
ngerprints.
6
Thema:
Installation
i
!
!
EN
Installation
Installation notes
Here you can nd relevant installation
notes and common information.
The detailed installation manual
you can nd on our homepage www.
xomax.de.
The printed version of a common
installation manual you can nd in
the package.
We recommend you to let the
technician install the unit in your
vehicle.
Before the installation
WARNING!
Please read the following manual care-
fully before you install the unit.
Damages caused due to an inapprop-
riate installation will not be covered by
warranty.
If you do not want to risk your warranty
entitlement, please let the technician
install the unit in your vehicle.
» To avoid a short circuit please
disconnect the vehicle battery before
the installation. To do it properly please
read the manual of your vehicle.
» Make sure that your vehicle is
equipped with a car radio slot of
required size (2DIN)
» As may be the case you will need a
suitable faceplate, adapter or other
accessories. These could be provided
from your local specialist supplier.
» The connection cables may not be
cutted or short-circuited. Other wise the
warranty becomes invalid.
» Before the installation please make
sure that your vehicle has the 12 Volt
on-board power supply.
» The minus (-) should be connected
with the ground (GND) (negative).
» Please tag the polarity of the avai-
lable speakers before you disconnect
the vehicle battery.
» A proper grounding of the unit's
housing requires a clean ground
connection. Thus the grounding area
should be rust-, stain- and dust-free.
» Please ground the cable separately
from other heavy current devices such
as an amplier etc.
» Please ensure that the colored cables
are connected according to the wiring
diagram. The wrong wiring may lead to
malfunctions or even damages of the
electric elements of the vehicle.
» Please note that the connection
cables of this unit and of the other
devices may have the same purpose
but the different color. For this reason
while connecting this unit with the
other devices please ensure that both
7
Thema:
Installation
EN
of the cables in each case have the
same purpose. To connect everything
correctly please refer to the manuals of
the both devices.
» Please ensure that the negative
speaker cable is in each case connected
with the negative speaker terminal of
the ISO por t. Do not ever connect the
negative speaker cables with the vehicle
body.
» This unit is designed and construed
for connection with 4 speakers. Do not
combine this unit with devices that are
designed and construed for connection
with 2 speakers.
» The speakers should feature the
impedance of 4-8 Ohm and a sufcient
wattage.
» Please ensure that the speakers you
are connecting with the unit are intact.
Damaged speakers can impair the unit.
» To avoid a short circuit please isolate
all cable junctions and endings of the
unused cables with the electrical tape.
connect it with the vehicle battery.
» Do not ever connect speaker cables
among one another. In case you do not
want to connect all the 4 speakers with
the unit please isolate the endings of
unused cables with the electrical tape
to prevent a short circuit.
» Do not ever connect the negative
speaker cables with the vehicle body.
» To ensure a awless performance of
the unit the intergration angle should
amount to +/- 30.
» All the cables should be layed and
xated tidy and properly. The cables
should not contact any movable or hot
objects.
» If your vehicle doesn't have an "ACC"
ignition position, please connect the red
cable with the ignition switch. Otherwise the unit will not turn of f automatically, causing the discharging of the
vehicle battery.
» To avoid a rogue and hazardous
short circuit do not lay the yellow cable
through the engine bay in order to
8
Thema:
Basic operations
Basic operations
Functions of the buttons on the front panel
EN
9
Thema:
Basic operations
Unit o n/of f
Press the button to turn the unit on. Keep it pressed for ca.1 seconds to turn it down.
Operation on the HOME screen
Home screen
EN
10
Thema:
Basic operations
Move und delete icons on home screen
EN
Change the skin for home screen
11
Thema:
Basic operations
Clock and date setup
EN
Language setup
Steering Wheel Control setup
12
Thema:
Network setup
Navigation operation
Button color setup
EN
Network setup
Wi-Fi setup
13
Thema:
Widget and Application operation
3G Dongle setup
Widget and Application operation
Install and uninstall APP's
EN
Install APP's
Uninstall APP's
14
Thema:
Widget and Application operation
Calendar Widget
EN
15
Thema:
Radio operation
Radio operation
Radio Basic operation
EN
RDS
16
Thema:
Bluetooth control
Stores channel
EQ / Fader / Balance setting
Bluetooth control
Connecting
EN
Registing your Bluetooth device
Connecting a registered Bluetooth manually
Delete a registered device
17
Thema:
Hands-Free call
Hands-Free call
EN
18
Thema:
Hands-Free call
Bluetooth setup
EN
Playing Bluetooth Audio device
19
Thema:
Multimedia
Multimedia
EN
20
Thema:
Multimedia
EN
21
Thema:
Mirror Link
Mirror Link
Android USB connect
EN
22
Thema:
Mirror Link
EN
iPhone WIFI connect
23
Thema:
Mirror Link
EN
24
Thema:
Setting Up
EN
Setting Up
25
Thema:
Setting Up
EN
26
Thema:
Connection schedule – ISO plug
Connection schedule – ISO plug
EN
27
Thema:
ISO plug configuration
A
B
!
ISO plug configuration
EN
2 1 2 1
4 3 4 3
6 5 6 5
8 7 8 7
Socket A (power supply)
On the A side you can nd the socket
for power supply.
A1 – spare
A2 – spare
A3 – spare
A4 - +12V ignition plus (red)
A5 – (+) electric antenna (blue)
A6 – (+) button illumination (orange)
A7 - +12V battery / steady plus (yello)*
A8 – (-) minus / ground (black)
* - Some vehicle manufacturers use
their own pin assignment. Especially
the terminals A7 (ignition plus) and A4
(steady plus) are often interchanged.
The incorrect connection in this case
leads to following problem: the unit
can not be turned on if the ignition is
off and all the saved settings are lost
as soon as the unit will be turned off. If
these problems appear the connections
A4 and A7 should be interchanged.
Socket B (loud speakers)
On the B side you can nd the speakers
terminals.
B1 – (+) rear right (violet)
B2 – (-) rear right (violet/black)
B3 – (+) front right (gray)
B4 – (-) front right (gray/black)
B5 – (+) front left (white)
B6 – (-) front left (white/black)
B7 – (+) rear left (green)
B8 – (-) rear left (green/black)
The terminals are coloured by pairs, in
each case one (+) and one (-).
Though the design of ISO plug is
standardized, it's pin assigment is not
and may vary. Thus in case of mis-
match of connections due to different
pin assignments a simple plug'n'play
connection may lead to grievous errors.
28
Thema:
B-connector (RCA cable connections)
B-connector (RCA cable connections)
C-connector (RCA cable connections)
EN
29
Thema:
Rear view camera (optional)
!
Rear view camera (optional)
Common information
A rear view camera is an optional accessory. Please inform yourself by your local
specialist supplier about current models and their options and possibilities.
You can nd compatible cameras on the homepage: www.carmediashop.de
All the cameras are equipped with video cinch output.
Rear view cameras are to be installed at the rear of the vehicle. They serve as a
parking assist element and an auxiliary extension of the viewing angle while
rever sing.
Please do not rely on the camera's picture only while reversing.
A rear view camera serves as an additional assistance, it can not substitude your
full attention driving.
EN
Connection
The camera port REAR CAMERA IN is located on the rear side of the unit.
The yellow cinch jack is the terminal for the incoming video signal from the camera.
Plug the video cable of the camera into it.
The unit's cable (pink color) as well as the camera itself has to be connected with
the rear lights of the vehicle (+12V) to ensure the correct functionality of the
camera mode.
30
Thema:
Rear view camera (optional)
EN
Start the rear view camera mode
If the camera was connected properly the unit switches automatically to the
camera mode as soon as you shift the reverse gear. As soon as you shift any other
gear the unit switches back to the previous mode.
31
Thema:
Common solutions
Common solutions
The following advices are generally valid and refer to diverse Xomax models with
the similar characteristics. Please note that some articles may refer not to your
model exactly and may contain the describtion of features and functions that your
model does not support.
EN
Describtion of the
problem
The remote control
is without function.
Radio stations are
lost:
As soon as the unit
will be turned off all
the stored stations
and user's settings will
be lost.
Cause and solution
Sol ution 1:
Please ensure that the batter y lm is removed. By delivery the
battery is protec ted by a lm which should be removed before
usage.
Solution 2:
The bat tery could be empty. Please replace it if required.
Solution 3:
Please make sure that the infrared receiver (labelled with IR)
on the control panel is not blocked.
Note:
You can test the functionality of the remote control
as follows: please hold the IR transmit ter towards a
camera (e.g. a cell phone camera) and press any button
on the remote control. If the remote control is operative
you can see the infrared signal on the display of the
used camera device.
This problem is caused due to a wrong connection of the ISO
cable.
Please interchange the cables for ignition plus and for steady
plus.
Caution:
If these wires have fuses, the latter should be interchanged as
well.
32
Thema:
Common solutions
EN
Poor radio reception:
The radio tuner nds
no broadcaster or the
reception is poor.
The unit does not
turn on.
For problem-solving regarding the radio reception it is
important to know the type of the antenna of your vehicle.
Here are the possible solutions for each type of the antenna:
Typ e 1 – passive antenna:
We recommend you to substitude the existing antenna by the
larger and therefore more ef cient one.
Shark n or r od antennas (under 5 cm) are denitely insuf-
cient.
Typ e 2 – active antenna:
The vehicle provides no current for the ac tive antenna. In this
case a phantom power is required, which provides the ac tive
antenna with the ex ternal power supply.
Typ e 3 – active antenna with diver sity system:
The unit provides no current for the active antenna and has
no diversity suppor t. For this type of antenna is required the
phantom power with an integrated diversity system.
Note:
A phantom power is not to be confused with an antenna
amplier, which is far less efcient.
This problem is in most cases caused due to a wrong connection of the ISO cable.
Please review the pin assignments of the ISO plug and ISO
socket. Pay attention to the proper connection of the ignitionand steady plus and correct the discrepancy if required.
Note:
Though the design of ISO por t is standardized, it's pin
assigment is not and may vary. Thus in case of mismatch
of connections due to dif ferent pin assignments a simple
plug'n'play connection may lead to grievous errors.
33
Thema:
Disposal / recycling information
Disposal / recycling information
Disposal of an old unit / battery
User information regarding disposal of electric and electronic devices (private
households).
This symbol on products or in their manuals implies that electric and electronic
devices at the end of their service life should be separated from the domestic waist.
Please hand these products for recycling at municipal collection points free of
charge.
The proper disposal of these products contributes to environment protection. To
nd the nearest collection point or recycling yard please consult your municipal
administration.
EN
According to the bat tery decree we make you aware of your obligation to dispose of
empty batteries at municipal collection points.
Batteries that contain pollutants (e.g. Hg = mercury, Pb = lead, Cd = cadmium) are
labelled with the symbol pictured above.
At our place you can free dispose of the empty batteries purchased at our store.
XOMAX distribution worldwide
Purchase XOMAX car radio online:
https://www.carmediashop.de
XOMAX in the world wide web
XOMAX manufacturer's information:
http://www.xomax.de
34
Loading...