Topic:
i
XOMAX
EN
Installation Manual
XM-2D6904
XM-2DN6903
XM-2DN6906
Thank you for purchasing one of our XOMA X products!
We appreciate your condence. Enjoy your brand new multimedia unit!
Please read the following manual carefully before you install and use the
unit. Please save this manual in case you will need to clarify further possible
questions regarding installation and usage of our product.
We recommend you to let the technician install the unit in your vehicle.
You can nd the detailed manual for your XOMAX product on our homepage:
www.xomax.de/download
1
EN
Table of contents
Topic:
Table of contents
Safety instructions and precautions 3
Handling by stop only ...................... 3
Installation .................................... 3
Regular loudness ............................ 3
Repair of the unit............................ 3
Power supply ................................. 3
Replacement of fuses ...................... 3
Overheating ................................... 3
Regular temperature ....................... 3
Cleaning of the unit ........................ 4
Usage of the touchscreen ................ 4
Moisture ........................................ 4
The risk of injuries .......................... 4
Handling the CDs and DVDs ............. 4
Installation 5
Installation instructions 7
1 Installation steps ......................... 7
2 Fixture of the installation frame ..... 8
3 Connect the unit .......................... 8
Connection schedule: Cinch
multicore 12
Connection schedule: ISO
plug 13
ISO plug conguration 14
Socket A (power supply) .................14
Socket B (loud speakers) ................14
Control cable connections 15
Common solutions 16
Recycling of an old unit 18
Recycling of the battery 18
Specications 19
Deinstallation instructions 9
1 Prepair the instruments ................ 9
2 Bezel remove .............................. 9
3 Use the extraction keys ...............10
4 Unloose the unit .........................10
5 Remove the unit .........................11
6 Remove the installation accesso-
ries ...........................................11
2
Topic:
Safety instructions and precautions
!
!
!
!
!
!
!
!
!
EN
Safety instructions and
precautions
Handling by stop only
To avoid any accidents please don't
handle the unit while you driving. Please
stop and park the vehicle at safety
place and handle the unit casually.
Installation
Please read the following manual
carefully before you install the unit. We
recommend you to let the technician
install the unit in your vehicle.
Regular loudness
Please set the loudness of the unit to
the appropriate level so you were still
able to hear exterior noises especially
trafc warning signals. Furthermore the
higher loudness level can damage your
hearing organs.
Repair of the unit
Due to awed warranty seal the
warranty becomes invalid.
Power supply
Use the unit connected only to 12 Volt
on-board power supply. The minus (-)
should be connected with the ground
(GND) (negative).
Due to the wrong conguration exists
the danger of re. In case of doubt
please consult with professional technicians.
Replacement of fuses
While replacing the fuse please make
sure that the new fuse has the same
properties as the old one, especially the
amperage.
Overheating
Do not occlude the vent holes to avoid
the heat generation and accumulation
in the unit. Otherwise exists the danger
of re.
Do not open the unit. Do not try to
repair the unit by yourself due to any
emerging technical problems. While
opening the unit by yourself exists the
danger to be electrocuted.
Do not use the unit any further since
you detect any kind of technical
problems.
Leave all the repair operations to
professional technicians.
Regular temperature
Please make sure that the temperature
inside of the vehicle amounts to not
more than +40 C.
If it's too cold or too hot inside of the
vehicle, do not turn the unit on until
the inside temperature of the cabin
descends.
3
EN
Safety instructions and precautions
!
!
!
!
!
!
Topic:
Cleaning of the unit
Please keep the unit clean and remove
the dust from it regularly. Please use for
that a soft and dry cleaning rag.
Major soilings can be removed carefully
with the wet cleaning rag. Do not use
any chemical or alcohol-containing
detergents to avoid the damage of the
unit's varnish.
Usage of the touchscreen
Do not press the touchscreen too hard
– it may lead to image distortions, unit
malfunctions and touchscreen damages.
Do not use any sharp articles to use
the touchscreen. Please handle the
touchscreen with your nger or with the
appropriate stylus.
Handling the CDs and DVDs
Remove transport securing
screws (if available)
Before using the optical drive, be
sure to remove the two transport
locking screws marked with colored
stripes (top of the radio).
Moisture
To avoid the danger of re or the
electric shock do not put the unit in to
the moist environment (e.g. adverse
weather conditions, inappropriate wet
cleaning etc.)
The risk of injuries
Do not open the cabinet or modify
the unit. The active laser components
used with this product comply with the
provisions of Laser Class 1.
4
Topic:
Installation
!
!
EN
Installation
We recommend you to let a
professional technician install the
unit in your vehicle.
WARNING!
Please read these advices c arefully
before installation procedure.
The damages caused by an inappropriate
installation are not covered by warranty.
To avoid the risk of losing the warranty
please let a specialist accomplish the
installation of the unit.
» To avoid a short circuit please
disconnect the vehicle battery before
the installation. To do it properly please
read the manual of the vehicle.
» Please be aware that this unit has an
Double-DIN standart size. Make sure
that your vehicle is equipped with an
installation cell of required size.
» As may be the case you will need a
suitable faceplate, adapter or other
accessories. These could be provided
from your local specialist supplier.
» The connection cables may not be
cutted or short-circuited. Otherwise the
warranty becomes invalid.
» The minus (-) should be connected
with the ground (GND) (negative).
» Please tag the polarity of the avai-
lable speakers before you disconnect
the vehicle battery.
» A proper grounding of the unit's
housing requires a clean ground
connection. Thus the grounding area
should be rust-, stain- and dust-free.
» Please ground the cable separately
from other heavy current devices such
as an amplier etc.
» Please ensure that the coloured
cables are connected according to the
wiring diagram. The wrong wiring may
lead to malfunctions or even damages
of the electric elements of the vehicle.
» Please note that the connection
cables of this unit and of the other
devices may have the same purpose
but the different colour. For this reason
while connecting this unit with the
other devices please ensure that both
of the cables in each case have the
same purpose. To congure everything
correctly please refer to the manuals of
the both devices.
» Please ensure that the negative
speaker cable is in each case plugged
into the negative speaker socket of the
ISO interface. Do not ever connect the
negative speaker cables with the vehicle
body.
» Before the installation please make
sure that the vehicle has the 12 Volt
on-board power supply.
» This unit is designed and construed
for connection with 4 speakers. Do not
combine this unit with devices that are
designed and construed for connection
5
EN
Installation
Topic:
with 2 speakers.
» The speakers should feature the
impedance of 4-8 Ohm and a sufcient
wattage.
» Please ensure that the speakers you
are connecting with the unit are intact.
Damaged speakers can impair the unit.
» To avoid a short circuit please isolate
all cable junctions and endings of the
unused cables with the electrical tape.
» All the cables should be layed and
xated tidy and properly. The cables
should not contact any movable or hot
objects.
» If the vehicle doesn't have an "ACC"
ignition position, please connect the
red cable with the ignition switch.
Otherwise the unit does not turn off
automatically, causing the discharging
of the vehicle battery.
» To avoid a rogue and hazardous
short circuit do not lay the yellow cable
through the engine bay in order to
connect it with the vehicle battery.
» Do not ever connect speaker cables
among one another. In case you do not
want to connect all the 4 speakers with
the unit please isolate the endings of
unused cables with the electrical tape
to prevent a short circuit.
» Do not ever connect the negative
speaker cables with the vehicle body.
» To ensure a awless performance of
the unit the intergration angle should
amount to +/- 30.
6
Topic:
Installation instructions
i
Installation instructions
Please note, that this installation manual was generalized attending to provide
you with the common indispensable information. Therefore it might cause from
product to product some irrelevant discrepancies, especially regarding some
depictions (e.g. installation accessories)
You can nd the detailed manual for your XOMAX product on our homepage:
www.xomax.de/download
1 2 43
1
EN
1 Installation steps
1. installation frame* (if it's included in
delivery)
2. unit
3. transport screws
4. bezel
* - Installation frame is already rmly
xed to the unit's housing by delivery
7
EN
Installation
Topic:
2
2 Fixture of the installation frame
Please remove rst the installation
frame (if it's included in delivery) from
the unit. Please use for that the extraction keys ( see page 9 ). Possibly the
3
klick
3 Connect the unit
Please connect the ISO cable rst with
the ISO plug of the unit, then with the
one of the vehicle. Do not forget to
connect the radio aerial.
faceplate should be removed as well.
Please insert the installation frame in
the installation cell (car radio slot). Then
bend all the cogs outwards to xate the
frame inside the cell (slot).
Now slide the unit carefully into the
already xated frame till it clicks into
place.
8
Topic:
Deinstallation instructions
Deinstallation instructions
1
EN
1 Prepair the instruments
To deinstall the unit you will need a
spanner (a wrench) to unloose the xation nut and 2 extraction keys (optional)
2
2 Bezel remove
Remove the plastic bezel very carefully.
Ensurethe holding pins are not torn off.
to release the unit from the installation
frame.
bezel
the frame clockwise rotation out.
With light pressure on one side, turn
9
EN
Deinstallation instructions
Topic:
3
extraction keys
3 Use the extraction keys
Please insert the extraction keys
into the dedicated recesses between
the installation frame and the unit's
housing.
4
4 Unloose the unit
When and as long as inser ted, the
extraction keys press the holding
side-cogs outwards so that the unit is
released from the installation frame and
In each case the key should be inserted
centered, the inserting point should be
equally distanced both from the top and
from the bottom.
unlocking holding
side-cogs
can be carefully pulled out.
10
Topic:
Deinstallation instructions
EN
5
5 Remove the unit
Now pull the unit carefully out of the
installation frame or out of the car
radio slot in case the frame was already
rmly xed to the unit by delivery.
6
6 Remove the installation
accessories
Finally remove all the installation
accessories such as xation metal sheet
and installation frame.
Afterwards please disconnect all the
cables incl. the ISO multicore.
11
EN
Connection schedule: Cinch multicore
Topic:
Connection schedule: Cinch multicore
12
Topic:
Connection schedule: ISO plug
Connection schedule: ISO plug
EN
13
EN
ISO plug configuration
!
Topic:
ISO plug configuration
1 3 5 7
B
2 4 6 8
1 3 5 7
2 4 6 8
A
Socket A (power supply)
On the A side you can nd the socket
for power supply.
A1 – spare
A2 – spare
A3 – spare
A4 – (+12Volt) battery* (yellow)
A5 – (+) electric antenna (blue)
A6 – (+) key illumination (orange)
A7 – (+12Volt) ignition plus* (red)
A8 – (–) minus / ground (black)
* - Some vehicle manufacturers use
their own pin assignment. Especially
the terminals A7 (ignition plus) and A4
(steady plus) are often interchanged.
The incorrect connection in this case
leads to following problem: the unit
can not be turned on if the ignition is
off and all the saved settings are lost
as soon as the unit will be turned off. If
these problems appear the connections
A4 and A7 should be interchanged.
Socket B (loud speakers)
On the B side you can nd the speakers
terminals.
B1 – (+) rear right (violet)
B2 – (-) rear right (violet/black)
B3 – (+) front right (gray)
B4 – (-) front right (gray/black)
B5 – (+) front left (white)
B6 – (-) front left (white/black)
B7 – (+) rear left (green)
B8 – (-) rear left (green/black)
The terminals are coloured by pairs, in
each case one (+) and one (-).
Though the design of ISO plug is
standardized, it's pin assigment is not
and may vary. Thus in case of mis-
match of connections due to different
pin assignments a simple plug'n'play
connection may lead to grievous errors.
14
Topic:
Control cable connections
Control cable connections
EN
Hand brake
15
EN
Common solutions
Topic:
Common solutions
The following advices are generally valid and refer to diverse XOMAX models with
the similar characteristics. Please note that some articles may refer not to your
model exactly and contain the describtion of features and functions that your model
does not support.
The describtion of the
problem
The remote control is
without function.
The unit does not turn
on.
The cause and the solution
Solution 1:
Please ensure that the batter y lm is removed. By
deliver y the batter y is protected by a lm which should
be removed before usage.
Solution 2:
The bat tery could be empty. Please replace it if required.
Solution 3:
Please make sure that the infrared receiver (labelled with
IR) on the control panel is not blocked.
Not e:
You can test the functionality of the remote control as
follows: please hold the IR transmitter towards a camera
(e.g. a cell phone camera) and press any button on the
remote control. If the remote control is operative you
can see the infrared signal on the display of the used
camera device.
This problem is in most cases caused due to a wrong
connection of the ISO cable.
Please review the pin assignments of the ISO cable and
ISO plug. Pay attention to the proper connec tion of the
ignition- and steady plus and correct the discrepancy if
required.
Not e:
Though the design of ISO plug is standardized, it's pin
assigment is not and may vary. Thus in case of mismatch
of connections due to dif ferent pin assignments a simple
plug'n'play connection may lead to grievous errors.
16
Topic:
Common solutions
EN
Poor radio reception:
The radio tuner nds no
broadcaster or the reception is poor.
For problem-solving regarding the radio reception it
is impor tant to know the t ype of the antenna of your
vehicle.
Here are the possible solutions for each type of the
antenna:
Type 1 – passive antenna:
We recommend you to substitude the existing antenna
by the larger and therefore more efcient one.
Shark n or r od antennas (under 5 cm) are denitely
insufcient.
Type 2 – active antenna:
The vehicle provides no current for the ac tive antenna.
In this case a phantom power is required, which provides
the active antenna with the external power supply.
Type 3 – active antenna with diversity system:
The unit provides no current for the active antenna and
has no diversity support. For this type of antenna is
required the phantom power with an integrated diversity
system.
Not e:
A phantom power is not to be confused with an antenna
amplier which is far less efcient.
Radio stations are lost:
As soon as the unit will be
turned off all the stored
stations and users settings
will be lost.
This problem is caused due to a wrong connection of the
ISO cable.
Please interchange the cables for ignition plus and for
steady plus.
Caution:
If these wires have fuses the latter should be interchanged as well.
17
EN
Recycling of an old unit
Topic:
Recycling of an old unit
User information regarding recycling of
electric and electronic devices (private
households)
WEEE DE19856609
This symbol on products or in their
manuals implies that electric and
electronic devices at the end of their
service life should be separated from
the domestic waist.
Please hand these products for recycling at municipal collection points free
of charge.
The proper disposal of these products
contributes to environment protection.
To nd the nearest collection point
or recycling yard please consult your
municipal administration.
Recycling of the battery
According to the battery decree we
make you aware of your obligation to
dispose of empty batteries at municipal
collection points.
Batteries that contain pollutants
(e.g. Hg = mercury, Pb = lead, Cd =
cadmium) are labelled with the symbol
pictured above.
At our place you can free dispose of the
empty batteries purchased at our store.
18
Topic:
Specifications
EN
Specifications
Common data
Operating voltage ............................ 12V DC
Backlight color ............................. Multicolor
Instalation size .................................... 2DIN
Operation Temperature Range ..... 0° ~ +40°C
Audio
Output power ............................. 4 x 60 Watt
Output ............................ for 4 loudspeakers
Loudspeaker impedance ................ 4 - 8 Ohm
Frequency range ...................... 20Hz - 20KHz
Display
Display type ...................... TFT Active Matrix
Diagonal ....................... 17,7 cm / 6,95 inch
FM tuner
Frequency range ................... 87.5 - 108 MHz
S/N ratio ............................................. 75dB
IF frequency .................................. 10.7 MHz
Stereo Separation .................... 45 dB (1KHz)
AM tuner
Frequency range ................... 531 - 1611 kHz
Usable Sensitivity ................................. 25μV
SD card slot
Slot type ...................................... micro SD
Max. supported volume ..................... 128 GB
Compatible SD cards ........... SD/SDHC/SDXC
File System ......................... FAT32 or exFAT
Bluetooth
Technology ...... Bluetooth 3.0 + EDR Certied
Frequency ....................... 2.2402 - 2.48 GHz
Output power ...... +4dBm(max), 0dBm (AVE)
power class 2
Proles ................... HFP, A2DP, AVRCP, PBAP
Navigation (only for XM-2DN6903
und XM-2DN6906)
Positioning method ............................... GPS
Receiver frequency .................. 1575.42 MHz
Antenna type .............. External GPS antenna
Optical drive
Loading mechanism .......................... Slot-In
Disc size ........................................ Ø 12 cm
Storage medium typ ....................... CD, DVD
USB port
Version compatibility ............... 2.0 Full Speed
Max. supported volume ..................... 128 GB
Plug type .............................. type A, normal
File System ......................... FAT32 or exFAT
19
Loading...