Xerox Travel Scanner 100 User Guide

Travel Scanner 100

User Guide

Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.

The PaperPort® and OmniPage® brand name and logo are registered trademarks of Nuance Communications, Inc.

The NewSoft Presto! BizCard name and logo are registered trademarks of NewSoft Technology Corporation.

Google Desktop Search™ is a trademark of Google, Inc.

Kofax® and Virtual ReScan® are registered trademarks, and VRS™ is a trademark of Kofax Image Products, Inc.

Adobe®, Adobe® Reader®, Acrobat® Reader®, Adobe® Acrobat®, and the Adobe® PDF® logo are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries. The Adobe PDF logo will appear in this product’s software, and full access to Adobe software features is only available if any Adobe product is installed on your computer.

Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark and Sharepoint® is a registered trademark of Microsoft Corporation. ZyINDEX is a registered trademark of ZyLAB International, Inc. ZyINDEX toolkit portions, Copyright © 1990-1998, ZyLAB International, Inc. All Rights Reserved. All other products mentioned herein may be trademarks of their respective companies.

Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The software described is furnished under a licensing agreement. The software may be used or copied only in accordance with the terms of such an agreement. It is against the law to copy the software on any medium except as specifically allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated to another language, for any purpose other than the licensee's personal use and as specifically allowed in the licensing agreement, without the express written permission of Visioneer.

Part Number: 05-0769-100

Restricted Rights Legend

Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause 52.227-FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with all such laws and regulations.

Welcome

The Xerox Travel Scanner 100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Step 1: Install the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Step 2: Connect the Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Additional Applications Available with Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

View the User Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Contents

Scanning

Scanning using One Touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Scan Using AutoLaunch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Turn AutoLaunch Off/On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Scan from the One Touch Button Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Features of the One Touch Button Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Configuring One Touch AutoLaunch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Selecting New Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Creating a New Scan Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Editing or Deleting Scan Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Configure Before Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Selecting Document and File Format Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Selecting Options for One Touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Setting Destination Application Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Scanning with Optical Character Recognition (OCR) . . . . . . . . . . . . . . . . . . . . . . . . 46

Scan and Burn to a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Scanning with Event Forwarding (STI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Creating an HTML Web Page from Your Scanned Documents . . . . . . . . . . . . . . . 49

Transferring Scanned Documents to Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Hardware Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Calibration and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Setting PaperIn Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Skew Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Scanning from the TWAIN Interface

Accessing the TWAIN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Xerox Travel Scanner 100 User’s Guide iii

Contents

Scanning from the TWAIN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

TWAIN Interface Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Calibrating or Cleaning the Scanner from TWAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Scanning from the Windows Image Acquisition Interface

Fine Tuning Your Scans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Maintenance

Calibrating Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Cleaning Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Additional Cleaning Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Uninstalling or Reinstalling Your Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Uninstalling the Scanner and One Touch Software . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Uninstalling the PaperPort Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

To Install Another Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Xerox Travel Scanner 100 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Xerox Travel Scanner 100 Spare Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Appendix A Notices

Section 1: Safety Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Section 2: EMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Section 3: Operational Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Section 4: Maintenance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Section 5: Product Safety Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Section 6: Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Section 7: Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Section 8: Illegal Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Section 9: EH&S Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Index

iv Xerox Travel Scanner 100 User’s Guide

Welcome

Paper sensor Alignment

arrow

Paper feed Scanner

button

USB port

431 5

Congratulations on purchasing your Xerox Travel Scanner 100. With this scanner you can quickly scan paper items such as letters or receipts and place their electronic images on your computer. Powered through the USB port on your computer, this scanner is perfect for taking on the road.

The Xerox Travel Scanner 100

Paper Feed—Place an item face down in scanner, the page feeds through as it is being scanned.

Paper sensor—Recognizes when an item is inserted in the scanner.

Alignment arrow—Shows where to align the top right corner of the item you are scanning.

Scanner button—If a scan is in progress, pressing the button cancels the scan and the item feeds through.

When a scan is not in progress, pressing the button opens the One Touch configuration window.

Universal Serial Bus (USB) port—Connects the scanner to the computer.

Xerox Travel Scanner 100 User’s Guide 1

Welcome

Travel Scanner 100

USB Cable

Installation Disc Technical Support Card

Carrying Bag

Calibration Page (2) Photo Sleeves (2) Cleaning Sheet

Quick Install Guide

What’s in the Box

Before starting the software installation, please check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner.

2 Xerox Travel Scanner 100 User’s Guide

What You Need

IBM-compatible Pentium 4 PC, or AMD equivalent with:

• A DVD-ROM drive

• An available Universal Serial Bus (USB) port

•Microsoft

Pack 2 or 3), 32-bit or 64-bit Windows Vista

• Windows 2000 and XP: Minimum of 512 megabytes (MB) of internal memory (RAM)

Windows Vista: Minimum of 1 gigabyte (GB) of internal memory (RAM)

• 350 MB minimum of free hard disk space

A VGA or SVGA Monitor

The recommended settings for your monitor are:

• High Color (16-bit) or True Color (24-bit or 32-bit)

Windows® operating system: Windows 2000 (Service Pack 4), 32-bit Windows XP (Service

Welcome

• Resolution set to at least 800 x 600 pixels

To set your monitor’s colors and resolution:

• Open the Windows Control Panel

• Double-click on Display then select the Settings tab

Documentation

The following documentation is provided with your scanner:

• Quick Install Guide—Abbreviated installation instructions.

• Xerox Scanner User’s Guide—On the Installation Disc; contains detailed installation, scanning,

configuration, and maintenance information.

• MiniGuides—On the Installation Disc; contains detailed instructions on using the One Touch

OmniPage module, One Touch VRS module and SharePoint destination link.

• Readme—Contains the latest information about your scanner and software installation.

• PaperPort User’s Guide—On the Installation Disc; contains detailed feature and configuration

information for the PaperPort software.

• BizCard User’s Guide—On the Installation Disc; contains detailed instructions for using the software.

• Online Help—For the scanner configuration, TWAIN and WIA interfaces, and PaperPort software

applications.

Xerox Travel Scanner 100 User’s Guide 3

Installation

Installation is a quick, two-step process:

1. Install the software

2. Connect the scanner

Before You Begin

Please make sure of the following before you begin installation:

• The information in this guide may cover software not provided with the scanner you purchased.

Please disregard any information about the software not applicable to your scanner. Visit our web site at www.xeroxscanners.com for the latest software updates for your Xerox scanner.

• If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or

messages during installation asking you to allow the installation to proceed. Although the messages will differ based on the software your computer is running, in each case you should allow the installation to proceed if that option is available. Alternatively, you can turn off the AntiVirus or AntiSpyware software before installing your scanner, but if you do, make sure to turn it back on again when installation is finished.

• If you already have a scanner connected to your computer, it is recommended that you remove

that scanner’s driver program prior to installing your Xerox scanner. You can remove these programs from the Windows Add/Remove programs list. Please refer to the user manual provided with your other scanner hardware for instructions about removing the driver and software for that unit.

• If your computer is running Windows Vista, you may see the Vista User Account Control screen

asking you to confirm system changes. Click the Continue button to allow the installation to proceed.

4 Xerox Travel Scanner 100 User’s Guide

Installation

Step 1: Install the Software

The Installation Disc contains the necessary driver, and additional scanning software, to use your Xerox Travel Scanner 100.

To install the software:

1. Start Microsoft Windows and make sure that no other applications are running.

2. Insert the installation disc into your computer’s DVD-ROM drive.

The disc automatically starts.

3. The Select Language window opens. Click the drop-down menu arrow and select the language to use.

Click OK.

4. The disc’s Main Menu window opens.

NOTE: If the disc does not start, check the following:

• Make sure the disc drive’s door is completely shut.

• Make sure the disc was inserted in the drive in the proper direction (label side up).

To launch the disc manually:

• Open the Windows option for My Computer. You can do this by double-clicking on the My Computer

icon on your desktop.

• Double-click the icon for your DVD-ROM drive.

• The Installation menu for the disc should now open.

If the menu does not open:

• From the list of files on the disc, double-click the file named START32.EXE.

NOTE: The Scanner Readme file has late-breaking news about your scanner. The readme file is in

HTML format and will open in any standard browser.

Xerox Travel Scanner 100 User’s Guide 5

Installation

5. On the Main Menu, select Install Products.

6. Make sure the boxes for Nuance PaperPort

and Scanner Driver are checked.

NOTE: The software provided with your scanner may differ slightly from the list shown in the window.

7. Click Install Now.

The PaperPort Installation begins:

1. The Select Language window opens. Click the drop-down menu arrow and select the language to use.

Click OK.

2. On the PaperPort Welcome window, click Next.

Installing PaperPort will uninstall any existing version of PaperPort and will install the newer version. Your existing PaperPort files will not be affected.

6 Xerox Travel Scanner 100 User’s Guide

Installation

3. Read the PaperPort license agreement and select I accept the terms in this agreement, then click on

Next. If you choose not to accept the license agreement, the installation will terminate and the PaperPort software will not be installed.

4. On the Customer Information window, accept the current values or enter new information, then click

Next.

5. On the Setup Type window, keep the default Setup Type and click Next.

6. Click Install to begin the installation.

7. On the Product Registration window, do one of the following:

• Select Register online, click OK, then follow the registration instructions.

• Select Print registration form, click OK, then follow the instructions to complete and print the

registration form.

• Select Remind me in 7 days and click OK.

8. At the InstallShield Wizard Completed window, click Finish.

The scanner driver installation will now start

1. The Welcome to the One Touch 4.0 Setup Wizard opens.

2. Click Next.

3. On the Xerox License Agreement window, read the license agreement. If you accept the terms, select I

Agree then click Next.

If you choose not to accept the license agreement, the installation will terminate and the scanner driver will not be installed.

Xerox Travel Scanner 100 User’s Guide 7

Installation

4. The next window lists the choices of the drivers that you can install for your scanner.

5. Select the option that you want then click on Next.

• Full Install (OneTouch and TWAIN)—This is the recommended installation. It installs the

One Touch 4.0 software which provides the necessary driver software for the scanner. It also installs the scanning interface for the TWAIN driver. Installing this option means that you can use several different methods to scan, as explained in this User Guide.

• TWAIN Only—The TWAIN driver is installed without the One Touch software. You can use the

Xerox Travel Scanner 100 to scan from TWAIN scanning applications. You will not be able to use the AutoScan option.

6. Click Next.

A window opens with image quality samples asking you to select an image for your Color Space setting.

7. Select the option that looks best to you and click Next.

8 Xerox Travel Scanner 100 User’s Guide

Installation

8. STOP when you see the “Complete the installation by connecting your hardware” window. Do NOT

click OK yet. Leave the window open and proceed to the next section.

Xerox Travel Scanner 100 User’s Guide 9

Installation

Step 2: Connect the Scanner

NOTE: The scanner does not have an external power supply. It draws its power directly from the computer

through the USB cable. If you use a USB hub with your computer, the hub must have its own power supply. The scanner does not have an on/off switch. The scanner is ready to scan as soon as its software is finished loading onto your computer.

After you plug in the scanner you will be prompted perform a calibration. Please have your calibration page ready.

To connect your scanner:

1. Remove any tape from the USB cable.

2. Plug the USB cable into the USB port on the scanner then into a USB port on the computer. Check your

computer’s manual for USB port locations.

If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into either connection.

3. Your computer recognizes that a scanner has been plugged into the USB port and automatically loads

the appropriate software to run the scanner.

Do not proceed until you receive a message that your computer has found the new hardware, or updated the driver database. If your computer is running Windows XP or Windows Vista, you will see a message similar to the one below.

10 Xerox Travel Scanner 100 User’s Guide

Installation

4. The calibration utility opens. Follow the instructions on screen for calibrating the scanner.

5. Place the calibration page in the scanner in the direction printed on the page. The black strip should be

face down.

6. The scanner will pull the calibration page through the scanner. The page will move back and forth as

the scanner calibrates for the difference between dark and light.

7. When calibration is complete, the scanner will back the page out of the paper feed. Remove the page

when prompted by the calibration utility.

When you remove the calibration page from the scanner the calibration utility will automatically close. If the utility does not close, click on OK to close the window.

Xerox Travel Scanner 100 User’s Guide 11

Installation

8. When you’re certain that the software has completely loaded, return to the “Complete the installation

by connecting your hardware” window.

To see a quick overview about accessing and navigating the One Touch Button Panel, click More. When you’re finished reading the additional information, click OK.

9. Click OK to complete the installation process.

10. Click Close on the Installation Complete window to close and exit the software installer.

You can now install the additional applications you received with your scanner.

12 Xerox Travel Scanner 100 User’s Guide

Installation

Additional Applications Available with Your Scanner

Your scanner includes free, additional applications as described in the following table.

1. Return to the disc’s Main Menu and click Install Products.

2. Select the additional applications you want to install, then click Install Now.

3. Follow the instructions on the screen to install each of the additional products.

Software About the Software

Adobe® Acrobat® Reader

NewSoft Presto! BizCard

OmniPage® Pro

Google Desktop™ Google Desktop is a client application providing text search over email, files, scanned

Adobe Acrobat Reader is a stand-alone application that you use to open, view, search, and print PDF files. This application is located on the disc in the User Guides section.

BizCard quickly and easily converts the vital contact information on business cards into a convenient, searchable, digital database that can be easily synchronized between PCs, notebooks, PDAs and PIMs.

OmniPage Pro provides precision OCR analysis, advanced layout detection, and Logical Form Recognition™ (LFR) technology. Advanced security features quickly turn office documents and forms into over 30 different PC applications for editing, searching and sharing. Custom workflows handle large volumes of documents, and you can use its tools to print to PDF.

documents, music, photos, chats, viewed web pages and more.

You can now view and save the User Guides.

Xerox Travel Scanner 100 User’s Guide 13

Installation

View the User Guides

1. On the Main Menu, click User Guides.

The User Guides are in Adobe® Acrobat® PDF format. If you need to, click Adobe Acrobat Reader to

install it now. Follow the instructions on the installation windows.

If your computer already has Adobe Acrobat Reader installed, please do not select it unless the version provided on the installation DVD is a newer version than the one currently installed on your computer.

2. Click the name of a User Guide you want to view and it will open in Acrobat Reader. Use the Acrobat

Reader Save command to save that User Guide on your computer.

The SharePoint Mini-Guide has information about a feature in the One Touch 4.0 software to link to Microsoft’s SharePoint application. This brief Mini-Guide explains how to setup the SharePoint link in One Touch.

The One Touch VRS Mini-Guide has information about a feature in the One Touch 4.0 software to use VRS when scanning. This brief Mini-Guide explains what the feature is and how to use the VRS settings when creating or modifying a scan configuration.

The One Touch OmniPage Mini-Guide has information about the OmniPage module in the One Touch

4.0 software. This brief Mini-Guide explains what the feature is and how to use the OmniPage settings when creating or modifying scan configurations.

3. When you’re finished, click Main Menu to return to the Main Menu window and click Exit.

4. Remove the installation disc and store it in a safe place.

That’s it! Installation is finished and your Xerox Travel Scanner 100 is ready to scan.

14 Xerox Travel Scanner 100 User’s Guide

Installation

The One Touch Icon

The Serial Number

Register Your Scanner and Check for Updates

Registering your scanner is important as it provides you with access to our free telephone support service. Registration also gives you free access to software updates for your scanner.

To register your scanner:

1. Right-click on the One Touch icon in the Windows Notification Area (at the bottom right corner of the

screen).

2. Choose Check for Online Updates from the pop-up menu.

3. Follow the instructions on the screen and register your scanner by entering your scanner’s serial

number and your email address.

NOTE: A valid email address is required.

The serial number is located on the underside of the scanner.

After registration is complete you will receive an email message with your RegID.

4. After receiving your RegID, write it down on a piece of paper and keep it with your scanner so you will

be able to find it easily.

Xerox Travel Scanner 100 User’s Guide 15

Scanning

You have several different scanning options with your Xerox scanner. Each method scans equally well, so use the one with appropriate options for the item you are scanning.

• One Touch AutoLaunch—To use the scanner’s AutoLaunch feature,

simply insert a document in the scanner and it is automatically scanned using predefined settings from the OneTouch software. See “Scan Using AutoLaunch” on page 17.

• One Touch Button Panel—Use this scan option when you want to

scan from the computer screen. This scans with the same settings as when using the AutoLaunch scanning feature. See “Scan from the One Touch Button Panel” on page 20.

• TWAIN Interface—The TWAIN interface is also for scanning from

various programs on your computer. The TWAIN interface is available from the PaperPort software, as well as from other programs such as Microsoft Word. See “Scanning from the TWAIN Interface” on page 60.

• Windows Image Acquisition (WIA) Interface—If your computer is

running Windows XP or Windows Vista, you can use this option to scan with the Microsoft WIA interface. Select the WIA scan settings, put the document in the scanner, then click the Scan button on the WIA window. See “Scanning from the Windows Image Acquisition Interface” on page 65.

16 Xerox Travel Scanner 100 User’s Guide

Scanning

Scanning using One Touch

One Touch is your main scanning interface for using the scanner. Placing a page in the scanner automatically starts the scanner and sends the image to the destination selected in the One Touch properties.

NOTE: Always remove any staples or paper clips from documents before inserting them into the

scanner’s paper feed. Staples and paper clips can jam the feed mechanism and scratch the internal components. Also remove any labels, stickers, or Post-It™ notes that may come off during the scanning process and get stuck in the scanner. Misuse as described here will void your scanner’s warranty.

Scan Using AutoLaunch

When you insert an item into the scanner, it is automatically scanned and the image is sent to a destination location or application on your computer, or to a network drive.

Using AutoLaunch:

1. Align a document with the aliment arrow and insert it into the scanner, face down, into the paper feed

slot.

The scanner grabs the top edge of the paper and automatically begins to scan and feed the paper through the scanner.

2. A scan progress window opens and the image is sent to the selected application for PaperIn button.

In this example the Destination Application is the PaperPort desktop.

Xerox Travel Scanner 100 User’s Guide 17

Scanning

One Touch Icon

Hardware icon

3. You can now work with the image in the Destination Application.

Turn AutoLaunch Off/On

If you want to scan from One Touch button panel on screen, or to be able to place a page in the scanner and wait until you are ready to initiate the scan, you can turn the AutoLaunch feature off. This option is in the Device Settings for your scanner’s hardware properties.

To turn AutoLaunch off or on:

1. Click on the One Touch icon in the Windows notification area on the right side of the screen.

2. Click on the scanner icon to the right of the green buttons, in the title bar of the One Touch button

panel.

3. Click on the Properties button in the hardware properties window.

18 Xerox Travel Scanner 100 User’s Guide

Scanning

4. In the Device Settings tab, click on Enable the generation of events when paper is inserted into the

scanner to deselect this option.

5. Click on OK to save the changes and close the window. Click on OK to close the Hardware Properties

window.

The AutoLaunch feature is now turned off. Your scanner will not start scanning until you click on the scan button on the One Touch button panel, or on the scanning interface from the application you are using.

To turn AutoLaunch back on, follow the instructions in this section and click on the option in step 4 to select to enable the feature.

Xerox Travel Scanner 100 User’s Guide 19

Scanning

One Touch Icon

Scan from the One Touch Button Panel

Scanning from the button panel on your computer’s screen works like inserting a page in the scanner when AutoLaunch is turned on.

To scan from the One Touch Button panel:

Follow the steps in the previous section to turn off the AutoLaunch feature before scanning with the One Touch panel. If AutoLaunch is turned on, the scanner will automatically scan when a page is inserted in the scanner.

1. Place a page face down in the paper feed slot, aligned to the arrow on the right side of the scanner.

2. Click on the One Touch icon in the Windows notification area (at the lower right corner of the screen.)

3. The One Touch panel opens.

4. Click on the PaperIn button.

5. A scan progress window opens and the image is sent to the selected application for the One Touch

button.

In this example the Destination Application is the PaperPort desktop.

6. You can now work with the image in the Destination Application.

20 Xerox Travel Scanner 100 User’s Guide

Scanning

The Hardware View

The Button View

Features of the One Touch Button Panel

The One Touch panel is your on-screen set of controls for the scanner. From the panel you can access the hardware settings for your scanner and configure the PaperIn button.

Click on the One Touch icon to open the panel.

The Title Bar

• Green arrows—click to cycle through the panel’s 2 views.

• Scanner icon—click to open the scanner’s hardware properties.

• Red “X”—click to close the One Touch panel.

The Button View

• Left-click on a Destination Application icon to start scanning.

• Right-click on a Destination Application icon to open the One Touch Properties.

• Single-click on the detailed information to open the One Touch Properties.

The Hardware View

• Left-click on the scanner icon to return to the Button view.

• Right-click on the scanner icon to open the scanner’s hardware properties.

Xerox Travel Scanner 100 User’s Guide 21

Scanning

Right click on PaperIn, left lick on the detailed information, or press the button on the scanner to open the One Touch Properties.

Configuring One Touch AutoLaunch

When you installed the scanner, the software configured One Touch with all applications on your computer that you can scan to. The button consists of: a Destination Application, a Scan Configuration, and a File Format.

You can open the One Touch Properties window by pressing the button on the scanner, or by opening it from the One Touch Panel on screen.

1. Click on the One Touch icon.

2. Right click on the PaperIn button, single left click on the detailed information.

3. The One Touch Properties window opens.

NOTE: Some of the options on the One Touch Properties Window are “grayed out” and are not available,

these options are not appropriate for your scanner model.

Changing the PaperIn setting:

1. Click on an application name in the Select Destination list.

2. Select a file format in the Select Format panel.

3. Select a scanning configuration in the Select Configuration list.

4. Click on OK to save the changes.

5. Place a page in the scanner.

6. The scanner starts scanning and sends the image to the application, with the file format and scanning

configuration you specified.

NOTE: The next section contains detailed information on making changes to the One Touch Properties

window.

22 Xerox Travel Scanner 100 User’s Guide

Selecting New Settings

Select the Destination Application that will open when you are finished scanning. You use the destination application to view and work with your scanned images.

Select a configuration for scanning the item.

Select a file format for your scanned images.

Click the Options tab to select options.

Select the application you want One Touch to send the scanned image to.

Click the icon of a selected configuration to view its settings.

The settings on the One Touch Properties window are:

Scanning

Select Destination—The list of Destination Applications that One Touch can send a scanned image to so that this application opens immediately after scanning is complete.

NOTE: If you select a word processing program such as Microsoft WordPad or Microsoft Word that can be

used for OCR (such as TXT or RTF), the text in scanned images is automatically converted to word processing text.

Select Configuration—The list of available scan configurations for the selected button. The configuration’s basic settings include: scanning mode, resolution (dpi), page size, brightness (Br), and contrast (Cr). To see a selected scan configuration’s settings, click its icon. Click the icon again to close the detailed information.

Xerox Travel Scanner 100 User’s Guide 23

Scanning

Color GrayscaleBlack and White Configure

Before Scan

These icons next to each scan configuration indicate the scanning mode.

See the sections “Creating a New Scan Configuration” on page 25 and “Editing or Deleting Scan Configurations” on page 31.

NOTE: Use Configure Before Scan if you want to set the scanning mode manually before scanning. See

“Configure Before Scan” on page 32.

Select Format—A set of file formats for the scanned image for the selected button. The formats are based on the type of Destination Application you select. This example shows the formats that apply to Microsoft Outlook.

The icon names indicate their file types. See “Selecting Document and File Format Options” on page 35 for more information about the available formats.

Options tab—Displays a window for selecting options related to the selected Destination Application for the scanned image. See “Selecting Options for One Touch” on page 39 for instructions on configuring the list of available destinations.

Properties button—Displays a window for selecting properties for each type of Destination Application. See “Setting Destination Application Properties” on page 40.

Refresh button—Updates the links between all your computer’s Destination Applications and One Touch

4.0. If you install new software that can be used as a Destination Application, click the Refresh button to link the new software to One Touch 4.0

New/Copy/Edit/Delete buttons—Click New or Copy to add new scan configurations to the list. Click Edit or Delete to change or remove them.

OK/Cancel/Apply buttons—OK accepts any changes and closes the window. Apply accepts any changes but leaves the window open so you can continue making additional changes. Cancel closes the window without accepting any changes.

24 Xerox Travel Scanner 100 User’s Guide

+ 67 hidden pages