Xerox DocuColor 2240-5308 User Manual

Allows you to display features settings to

program a copy job. It also allows you to

alternate between scanning and copying

currently executing, or to check or prin

Indicator lights when data is

eing received from a client.

Job Memor

Indicator lights when data is

stored in the machine’s memory.

feature screens.

Allows you to check or cancel jobs

saved documents.

Machine Status

Allows you to check the

machine status, meters, the state o

consumables, and output reports.

Online

Features

Job Status

Access

Use this administrator level feature to change machine default settings, and to setup or modify

accounts.

Clear

Clears an incorrect numeric

Numeric Keypad

Is used to enter copy quantity or other numeric information.

Control Panel - 1 of 2

Power Saver

Lights up green and is initiated automatically if the machine is left idle for a specific amount of time. Press the Power Saver button to bring the machine back to full

ower after the warm-up period.

Clear All

Returns the machine to the original Default State. When the Clear All button is selected in Interrupt mode default settings are applied only to the interrupting job.

Interrupt

Stops the printer/copier during the current job. This allows another job to be run.

Stop

Pressing Stop will halt the copy job in process at the completion of the current activity. A message asking if you want to press Start to continue the job or Clear All to cancel the job is displayed on the Touch Screen.

Start

Initiates a job or continues the copying process.

Control Panel - 2 of 2

Quick Start Guide