Fig. 1
Select Access.
Fig. 4
Select Auditron Administration.
Fig. 7
Use the Numeric Keypad to enter the password. (ie. 12345) Then press
Save.
Fig. 2
Enter the System Administrator Password from the Numeric Keypad and
then press Confirm. (See Machine Administration User Guide for
default password)
Fig. 3
Select System Settings.
Fig. 5
Select Create/Check Accounts.
Fig. 6
Select the Auditron Account to be setup. Press Create/Delete.
Auditron Settings for Copy - 1 of 4
Fig. 8
Press Account Name.
Fig. 9
Enter Account Name and press Save.
Continue with Auditron Setting for Copy Part 2 of 2.
Quick Start Guide
Auditron Settings for Copy - 2 of 4
Fig. 10
Press Close.
Note: Password, Color Access, Change Account Limit may be set at
this time.
Fig. 13
Select On for Copy Service.
Fig. 16
Press Exit.
Fig. 11
Press Close.
Fig. 12
Select Auditron Mode.
Fig. 14
Press Save.
Fig. 17
Changes have been completed and you are ready to use the Copy
Audtiron.
Note:
When the Copy Auditron is enabled only users that input
a valid user account name and password will be able to
copy.
Fig. 15
Press Close.
Auditron Settings for Copy - 3 of 4
Quick Start Guide
Auditron Settings for Copy - 4 of 4
Loading...