X4 Tech Sol T8.5 Instruction manual

A. CAUTIONS

Instruction manual

1. Never attempt your own maintenance. If something appears strange, please turn the TV off and consult your TV dealer. The TV is composed of many delicate electronic components that can be damaged or broken if you open the TV or attempt to modify it.

2. Do not exposing the TV to high humidity, dust, steam, oil, smoke, direct sunlight etc.

3. Do not use thinners or other chemical reagent. Wipe the TV off with a soft cloth if it gets dirty.

4. Do not leave the TV in excessively hot or cold places. Permissible storage temperatures are within the range of -25 to +60 . Permissible operation temperatures are within the range of 0 to +40 .

5. Only use specified adaptors and power sources.

6. Turn power OFF when not in use and unplug the adaptor.

7. Avoid dropping and strong impact.

For your safety, the driver should not watch TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries.

It doesn t mean the TV is broken with some light or dark colour dots on the LCD, it s an insurmountable condition with the TFT-LCD technology.

B. ASPECT

1. Main Part

1 2 3 4 5 6 7

15 16 17

12 13

(1) Remote sensor

(2) Selecting DTV/ATV/AV source button

(3)ANS button (to select Volume, Brightness, Contrast Colour, Tint )

(4) TV complex button (up, down, right, left ,ok buttons)

(5) TV menu button

(6) Power (standby ) ON/OFF button

(7) Power indication

(8) Speakers

(9) LCD screen

(10) Antenna

(11) Set stand

(12) Video input socket

(13) Left/Right Audio input socket

(14) Earphone socket

(15) DTV audio video output socket

(16) DC power input socket(10~15V)

(17) Main power switch

(18) Screw hole

DTV:DVB-T digital TV

ATV: Analogue TV

SOURCESOURCE

MIRRORMIRROR

ANSANS

LCD

ON/OFF

2. Remote Control

1. STANDBY to switch the TV on from standby or off to st andby.

2. NUMERIC KEYS Used to select channels or enter progr amming parameters.

3. LEFT/RIGHT( / ) Move the DTV left or right highlight marke d curs or. Adjust volume.

4. UP/DOWN( / ) Move up or down highlight marked cursor. And turn to the next or previous channel.

5. MENU Displays the Menu on th e sc reen .

6. TV/RADIO Receiver switches between DTV mode and Radio mode.

7. RED/GREEN/YELLOW DTV Function keys in menu.

8. EXIT Use in DTV menu go back to previous menu

9. OK To select DTV menu option , or to display channel list

10. LCD ON/OFF switch the LCD panel ON/OFF

11. AUDIO To select DTV audio mode: Left, Right, Stereo, language. To select ATV sound system

12. GUIDE Displays the DTV/Radio Program Guide.

13. MUTE Used to enable or disable the audio.

14. INFO To display the TV channel status or various program information of current service.

15. RECALL Return to the previous menu or switch to the last view Channel.

16. SLEEP TIME To enter sleep time setup.

17. SOURCE To select DTV, ATV, AV, VGA source (Some TV sets without VGA)

18. ANS To select Volume , Brightness, Contrast, Colour, Tint adjusting mode.

19. MIRROR only AV mode use to mirror the picture

C. RF input(ANT input)

1.Rod Antenna

(1)Install the rod antenna clockwise rotation (figure 1)

(2)Uninstall the rod antenna anticlockwise movement (figure 2)

D. POWER SUPPLY

AC Household Current: The optional AC adaptor allows the TV to be powered by standard household current (please look over the symbol of the AC adaptor.) Car Battery (DC 12V): The optional car adaptor (apply to the car with - polarity connected to the ground) allows the TV to be powered by a car battery through the vehicle s cigarette lighter.

E. BASIC OPERATION

Turning on power

(1)

(2)

2.Use the Antenna adapter (IEC to F-type connect) to connect outdoor Antenna

(1)Install the antenna adapter clockwise rotation (figure 1)

(2)Uninstall the antenna adapter anticlockwise movement (figure 2)

(1)

(2)

Slide the MAIN POWER Located on the back side of the main unit .

Selecting DTV/AV/ATV source

1)Turn on the power of the connected video equipment.

2)Press the SOURCE button to select the applicable input source .the screen displays DTV/ AV/ATV mode at the upper left corner each time SOURCE is pressed.

NOTE:NOTE:

If there is not signal, the screen will display :"NO SIGNAL"

ON-screen display

DTV mode

DTV

AV mode

ATV mode

ATV

Sound volume

1).PressANS to select volume .

2).press the RIGHT ( ) button to increase sound volume adjusting. The segment of indicator increases.

............

3).Press the LEFT ( )button decrease sound volume. The segment of indicator decreases.

To mute sound

............

1).Press the MUTE button to temporarily turn off the sound . Screen display the mute mark .

2).Press the MUTE or LEFT/RIGHT( / )button to turn the sound back to the previous level.

Adjusting the picture setting

1).Press the ANS button to select brightness contrast, colour, tint (tint only NTSC system using)

2).Press LEFT/RIGHT( / )button to adjust the brightness, contrast, colour, tint.

1).Press LEFT/RIGHT( / )button to adjust the brightness.

2).Press LEFT/RIGHT( / )button to adjust the contrast

............

4).Press LEFT/RIGHT( / ) button to adjust the colour

............

5).Press to adjust the tint (tint only NTSC

LEFT/RIGHT ( / ) button

system using )

............

Changing the channelsChanging the channels

1)Changing channels using the numeric buttons ,You can select

one-digit channel or two-digit channel .

Press one or two

buttons.

ATV allow you to select up to 100 Positions(channel 0 to 99)

2)Changing channels with the UP/DOWN( / ) button to one by one to select channels.

Digit

Function selection Function selection

1)At ATV/AV mode press menu button to select FUNCTION menu, Press the UP/DOWN( / ) button to select the function, Press the LEFT/RIGHT( / ) button to transfer the function items, The screen displays

LANGUAGE ENGLISHLANGUAGE ENGLISH

NORMALNORMAL

ASPECT 16:9ASPECT 16:9

LANGUAGE: Press the UP / DOWN ( / )button to select the language .Press the LEFT / RIGHT( / ) button to change the language Picture up and down: Press the UP / DOWN( / ) button to select . Press the LEFT / RIGHT( / ) button to turn the picture up and down. ASPECT MODE: Press the UP / DOWN( / ) button to select ASPECT. Press the LEFT / RIGHT( / ) button to turn the 16:9 or 4:3 picture.

FUCTIONFUCTION

+ 9 hidden pages