World Dryer L-970 User Manual

™

SLIMdri

Surface-Mounted ADA Compliant Hand Dryer

SLIMdri™ is the fastest and most energy efcient surface-mounted ADA compliant
hand dryer. The SLIMdri hand dryer provides the best drying performance in its
class, and is perfect for all commercial washrooms. The ON/OFF heating control,
stylish low-prole design with exible cover options, and universal voltage
features ts any décor or washroom environment.

Product Benets

• Surface-mounted ADA compliant

• Simplies installation and reduces installation costs

• Up to 40% faster dry time than leading competitive surface-mounted
ADA dryers

• Up to 70% less energy than competitive dryers

• Universal voltage – accepts 110-120 / 208 / 220-240 VAC input

• ON/OFF heat control to customize comfort and energy savings

• SteriTouch® antimicrobial protection to promote hand hygiene

• Automatic activation

• IP23 rating - protection against harmful water ingress

• Ultra compact and contemporary stylish design

• Durable and vandal resistant

Aluminum

Architecture & Engineering Specications

SLIMdri™ hand dryer shall be manufactured by World Dryer Corporation
to include a cover constructed of either die-cast aluminum nished
with epoxy paint or chrome plating; stainless steel or cast iron with
porcelain enamel nish. The wall mounting plate shall be constructed
of die-cast aluminum and the nozzle shall be constructed of die-cast
aluminum nished with epoxy paint nish. Epoxy painted covers shall
incorporate SteriTouch® antimicrobial technology. The cover shall be
attached to the wall mounting plate with tamper-proof screws. Motor
shall be a thermally-protected universal brush type motor operating at
13,000 RPM and delivering 70 CFM air ow at a velocity of 140 MPH
(12,320 LFM). Dryer shall incorporate universal controls accepting 115
/ 208 / 230VAC input. Dryer will incorporate an chrome wire heating
element protected by an automatic resetting thermal cutoff. Dryer
shall be activated by an automatic infrared sensor with a 3 second
run-on time and 60 second vandal shut-off. Control board shall contain
a heater control switch which can be controlled in either ON or OFF
position. Dryer shall provide a 48°F temperature rise. Dryer shall have
an ingress protection rating of IP23. Hand dryers shall be certied to
Underwriters Laboratories, Inc. standards for safety.

Cover Material Cover Finish / Kit

Aluminum White # L-974 9.0 lbs / 4.1 kgs 10.6 lbs / 4.8 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175

Aluminum Polished Chrome # L-970 9.0 lbs / 4.1 kgs 10.6 lbs / 4.8 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175

Aluminum Brushed Chrome # L-971 9.0 lbs / 4.1 kgs 10.6 lbs / 4.8 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175

Cast Iron Porcelain Enamel # L-976 17.6 lbs / 7.9 kgs 20 lbs / 9 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175

Stainless Steel

Stainless Steel

Polished # L-972 10.7 lbs / 4.8 kgs 12.3 lbs / 5.5 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175

Brushed # L-973 10.7 lbs / 4.8 kgs 12.3 lbs / 5.5 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175

110-120 / 208 /

220-240 V

Unit Weight Shipping Weight Unit Size (HxWxD) inch/mm Shipping Size (HxWxD) inch/mm

Electrical specications:

Amps 8.3 3.7 4.1

Watts 950 775 950

Hz 60 Hz 60 Hz 60 Hz

Cover options:

Cast Aluminum - with epoxy paint or chrome plating.
Cast Iron ­Stainless Steel - with polished or brushed nish

* Patented SteriTouch® Antimicrobial material reduces the spread of

harmful mold, fungus and bacteria.

Cast iron / Stainless steel

110-120 V 208 V 220-240 V

with porcelain enamel nish

3 15/16"
[100mm]

11 7/16"

[290mm]

9 1/4"

[235mm]

7 3/4"

10 11/16"

[197mm]

[271mm]

Heater Options

On / Off

5/16"

8mm

5 5/16"

135mm

7/8"

22mm

9 1/4"

235mm

Placement Instruction

• Hand dryers should be spaced at least 2 feet apart, near but not over the wash
basin

• In congested areas, dryers should be located to create a ow from wash basin to
dryer to exit

• SLIMdri should be mounted at least 18” above or away from reective surfaces
which may interfere with the automatic sensor operation.

• Dryer Quantity Recommendation:

Average Trafc: 1 dryer per 2 wash basins
Heavy Trafc: 1 dryer per wash basin
Industrial 54” Circular wash fountains: 4 dryers per sink

• Recommended mounting heights from oor to dryer bottom edge

Men’s washrooms 46” (117 cm)

Women’s washrooms 44” (112 cm)

Children’s washrooms, ages 4-7 32” (81 cm)

Children’s washrooms, ages 7-10 36” (91 cm)

Children’s washrooms, ages 10-13 40” (102 cm)

Children’s washrooms, ages 13-17 44” (112 cm)

Handicap Mounting Height 37” (94 cm)

Installation Guide

• SLIMdri™ hand dryers require a dedicated circuit with a minimum rating of 15
amps and must be properly grounded

• GFI circuit protection is recommended.

• One side of dryer should be mounted to a stud

Certications

IP23

Warranty

10 year limited warranty
5 year motor and sensor
3 year motor brushes

5700 McDermott Drive
Berkeley, IL 60163 U.S.A.
800-323-0701
www.worlddryer.com

92-MT0049 Rev04