World Dryer K-976 User Manual

SMARTdri™ Hand Dryer

High-Efciency Intelligent Hand Dryer

SMARTdri™ is the most energy efcient, “best of the best”, and fastest hygienic
hand dryer. SMARTdri is designed to optimize dry time, energy consumption and
sound quality. The intelligent, exible controls allow customizing of air ow, sound
quality and heating options to t any application environments

Product Benets

• Intelligent on/off heating and 3-speed motor controls provide exible options

• 10 second drying time, 3X speed of the traditional hand dryer

• Best cost-in-use, saves more than 99% compared to paper towels

• Extremely energy efcient -- uses only 12% energy of traditional dryers

• Most powerful combination of air velocity and air ow

• Longest life of all high-speed dryers

• Improved sound level and quality

• Durable and vandal resistant

• Hygienic antimicrobial technology

• Automatic operation

• Contemporary stylish design

Architecture & Engineering Specications

SMARTdri™ hand dryer shall be manufactured by World Dryer
Corporation to include a cover constructed of either die-cast aluminum
nished with epoxy paint or chrome plating; cold rolled steel nished
with epoxy paint; stainless steel with a polished (bright) or brushed
(satin) nish or cast iron with porcelain enamel nish. The wall
mounting plate shall be constructed of die-cast aluminum and the
nozzle shall be constructed of die-cast zinc alloy nished in either bright
chrome or nickel plating. Epoxy painted covers and motor enclosure
shall incorporate SteriTouch® antimicrobial technology. The cover shall
be attached to the wall mounting plate with tamper-proof screws. Motor
shall be a thermally-protected universal brush type motor operating at
23,400 RPM and delivering 100 CFM air ow at a velocity of 265 MPH
(23,320 LFM). Dryer shall incorporate a 400 watt heating element
constructed of Nichrome wire and protected by an automatic resetting
thermal cutoff. Dryer shall be activated by an automatic infrared sensor
with a 3 second run-on time and 30 second vandal shut-off. Control
board shall contain a motor control switch which can be controlled in
either Hi, MED and LOW power settings. Control board shall contain
a heater control switch which can be controlled in either ON or OFF
position. Dryer shall provide a 41°F temperature rise. Dryer shall have
an ingress protection rating IP24. Hand dryers shall be listed under re­examination service of Underwriters Laboratories, Inc.

Cover Material Cover Finish / Kit 110-120 V

Aluminum White # K-974 # K4-974 # K48-974 11.6 lbs/5.2 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Aluminum Polished Chrome # K-970 # K4-970 # K48-970 11.6 lbs/5.2 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Aluminum Brushed Chrome # K-971 # K4-971 # K48-971 11.6 lbs/5.2 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Aluminum Black # K-162 # K4-162 # K48-162 11.6 lbs/5.2 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Cast Iron White # K-976 # K4-976 # K48-976 22.0 lbs/9.9 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Steel White # K-975 # K4-975 # K48-975 14.2 lbs/6.4 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Stainless Steel Polished # K-972 # K4-972 # K48-972 14.2 lbs/6.4 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Stainless Steel Brushed # K-973 # K4-973 # K48-973 14.2 lbs/6.4 kgs 12.5” x 9.3” x 7.6” 319 x 236 x 192

Stainless Steel Recess Kit KKR-973 9.8 lbs/ 4.4 kgs 25.0”x 15.0”x 4.0” 635 x 381 x 102 30” x 15” x 7.88” 760 x 380 x 200

208 - 240 V
(60Hz)

220 - 240 V
(50Hz)

Unit Weight Unit Size (HxWxD) inch/mm Shipping Size (HxWxD) inch/mm

SMARTdri™ Product Specications

Electrical

110-120 V 208- 240 V 220 – 240 V

Amps 3.3- 10.0 1.8 - 5.2 1.7 -5.0

Watts 400 - 1200 425 - 1250 400 -1200

Hz 60 60 50

Cover material options:
Aluminum - die-cast aluminum nished with

epoxy paint or chrome plating

Steel - cold rolled steel nished with epoxy paint
Stainless steel - with a polished (bright) or

brushed (satin) nish
Cast Iron - with porcelain enamel nish

* Patented SteriTouch® Antimicrobial material reduces the spread of

harmful bacteria.

** Recess kit is available for ADA compliance.

14.7” x 11.4” x 10.8” 375 x 290 x 275

14.7” x 11.4” x 10.8” 375 x 290 x 275

14.7” x 11.4” x 10.8” 375 x 290 x 275

14.7” x 11.4” x 10.8” 375 x 290 x 275

14.7” x 11.4” x 10.8” 375 x 290 x 275

14.7” x 11.4” x 10.8” 375 x 290 x 275

14.7” x 11.4” x 10.8” 375 x 290 x 275

14.7” x 11.4” x 10.8” 375 x 290 x 275

Surface Mounted

(236 mm)

9.3"

"7.0

(178 mm)

12.5"

(319 mm)

0.88" (22 mm)
KNOCKOUT

(192 mm)

7.6"

Recessed Mounted

Rough Opening

13.43"

[341 mm]

25"

[635 mm]

[360 mm]

3.75"

[ 95 mm]

14.18"

2.37"

[60 mm]

8.5"

(216 mm)

Motor Settings

Hi / Med / Low

Heater Options

On / Off

Placement Instruction

• Hand dryers should be spaced at least 2 feet apart, near but not over the wash
basin

• In congested areas, dryers should be located to create a ow from wash basin to
dryer to exit

• SMARTdri should be placed more than 18” above or away from reective
surfaces which may interfere with the automatic sensor operation.

• Dryer Quantity Recommendation:

Average Trafc: 1 dryer per 2 wash basins
Heavy Trafc: 1 dryer per wash basin
Industrial 54” Circular wash fountains: 4 dryers per sink

• Recommended mounting heights from oor to dryer bottom edge

Men’s washrooms 46” (117 cm)

Women’s washrooms 44” (112 cm)

Children’s washrooms, ages 4-7 32” (81 cm)

Children’s washrooms, ages 7-10 36” (91 cm)

Children’s washrooms, ages 10-13 40” (102 cm)

Children’s washrooms, ages 13-17 44” (112 cm)

Handicap Mounting Height 37” (94 cm)

Installation Guide

• SMARTdri™ hand dryers require a dedicated 15 AMP circuit and must be
properly grounded

• GFI circuit protection is recommended.

• One side of dryer should be mounted to a stud

8.6"

[218 mm]

Certication Approved

IP24

Warranty

5 year limited warranty

11.5"

[292 mm]

9.3"

[236 mm]

24.06"

[611 mm]

Rough
Opening

5700 McDermott Drive
Berkeley, IL 60163 U.S.A.
800-323-0701
www.worlddryer.com

92-MT039A Rev04