World Dryer DM54-972 User Manual

AirMax™ Series Hand Dryers

The High Speed and Heavy Duty Hand Dryers

World AirMax series hand dryers are the industry standard for high speed hand
dryers. It’s suitable for high trafc facilities needing vandal resistant features.

Product Benets

• Automatic or push-button operation

• Longest life of high speed hand dryers

• 15 second dry time; 2X faster than traditional dryers

• Uses only 1/2 the energy of standard dryers

• Low sound level

• Durable and vandal resistant

• Classic style design

• Surface or recess mounted with ADA compliance

Design Features

Dryer

• Automatic unit - Activated by infrared sensor, automatic drying cycle.

• Push-button unit - Activated by electro-mechanical timer with 25 Amp switch
and 20 second cycle.

• Incorporates a 1600 watt Nichrome wire heating element Protected by an
automatic-resetting, thermal cutoff

• Provides a 50°F temperature rise

• IPX1 ingress protection

Motor

• Thermally-protected, universal brush-type motor operating at 12,000 RPM

• Delivering 238 CFM air ow at a velocity of 8,624 LFM (98 MPH)

Materials

• Cover material: Cast Iron with porcelain enamel nish. Optional 14GA
polished or brushed nish #304S.S. or epoxy enamel nish C.R. Steel.

AirMax Product Specications

Electrical

Amps 20 10 10

Watts 2300 2300 2300

Hz 60 60 50

115 V 208 - 230 V 220 – 240 V

Architecture & Engineering Specications

World Dryer AirMax hand dryers shall include a cover made of 1/4” thick cast iron with porcelain
enamel nish. Optional 14GA polished or brushed nish #304S.S. or epoxy enamel nish C.R.
Steel. Motor shall be universal type, 1/6 HP at 12,000 RPM. Dryers shall deliver 238 cubic feet
per minute of air volume (8600 LFM). Timer shall be electro-mechanical cam-style with 25 AMP
rated switch to operate dryer for 20 second period. Infrared sensor detect hands, initiates and
terminates drying cycle. High-tech sensor control to provide 1,000,000 dry cycles. Recessed
units use a 16-gauge steel wall mounting box. Hand dryers shall be listed under reexamination
service of Underwriters Laboratories, Inc.

Operation Cover Finish Cover Material Mounting Unit Weight

Push-Button White Cast Iron Surface 29 lbs/13.15 kgs M5-974 M54-974 M548-974

Automatic White Cast Iron Surface 29 lbs/13.15 kgs XM5-974 XM54-974 XM548-974

Push-Button White Stamped Steel Surface 18 lbs/8.16 kgs DM5-974 DM54-974 DM548-974

Automatic White Stamped Steel Surface 18 lbs/8.16 kgs DXM5-974 DXM54-974 DXM548-974

Push-Button Polished Stainless Steel Surface 18 lbs/8.16 kgs DM5-972 DM54-972 DM548-972

Automatic Polished Stainless Steel Surface 18 lbs/8.16 kgs DXM5-972 DXM54-972 DXM548-972

Push-Button Brushed Stainless Steel Surface 18 lbs/8.16 kgs DM5-973 DM54-973 DM548-973

Automatic Brushed Stainless Steel Surface 18 lbs/8.16 kgs DXM5-973 DXM54-973 DXM548-973

Push-Button White Cast Iron Recessed 35 lbs/15.8 kgs RM5-974 RM54-974 RM548-974

Automatic White Cast Iron Recessed 35 lbs/15.8 kgs XRM5-974 XRM54-974 XRM548-974

Automatic Brushed Stainless Steel Recessed 28 lbs/12.7 kgs DXRM5-973 DXRM54-973 DXRM548-973

Surface Mounted

Unit Size (HxWxD) 9.5” x 11.3” x 8.3” 241 mm x 287 mm x 211 mm
Shipping Size (HxWxD) 12.5” x 14.4” x 10.1” 317 mm x 366 mm x 256 mm

Recessed Mounted

Unit Size (HxWxD) 13.8” x 13.1” x 4” 351 mm x 333 mm x 102 mm
Shipping Size (HxWxD) 15” x 15” x 11.25 381 mm x 381 mm x 286 mm

115 V, 20 Amp Stock # 208-230 V Stock # 220 -240 V Stock #

2.5"

(63 mm)

Surface Mounted Recess Mounted

9.25"

(235 mm)

11.75"

(300 mm)

8 KNOCKOUTS 7/8" (22 mm) &
1 1/8" (29 mm) FOR CONDUIT

8 HOLES 13/64" (5 mm)
FOR MOUNTING

7.75"

(197 mm)

12.5"

(315 mm)

OPENING

1.5"

(38 mm)

(241 mm)

9.5"

.87"

(22 mm)
HOLE

8.33"

(212 mm)

1.25"

(32mm)

Placement Instruction

• Hand dryers should be spaced at least 2’ apart, near but not over the wash basin

• Automatic dryers should be located more than 18” above or away from any
reective surface that may interfere with the sensor operation.

• In congested areas, dryers should be located to create a ow from wash basin to
dryer to exit

• Dryer Quantity Recommendation:

Average Trafc: 1 dryer per 2 wash basins
Heavy Trafc: 1 dryer per wash basin
Industrial 54” Circular wash fountains: 4 dryers per sink

• Recommended mounting heights from oor to dryer bottom edge

TYPICAL

Recess Mounted

3.5"

Unit with ADA
Compliant Q Nozzle

(89mm)

2.25"

(57mm)

4"

(100 mm)

Certication Approved

3"

(76mm)

Washrooms Surface Mounted Recess Mounted

Men’s washrooms 46” (117 cm) 42” (107 cm)

Women’s washrooms 44” (112 cm) 40” (102 cm)

Children’s washrooms, ages 4-7 32” (81 cm) 28” (71 cm)

Children’s washrooms, ages 7-10 36” (91 cm) 32” (81 cm)

Children’s washrooms, ages 10-13 40” (102 cm) 36” (91 cm)

Children’s washrooms, ages 13-17 44” (112 cm) 40” (102 cm)

Handicap Mounting Height 37” (94 cm) 34” (86 cm)

Measured from oor to the bottom of the unit.

Installation Guide

• AirMax hand dryers require a dedicated 20 AMP circuit and must be properly
grounded

• GFI circuit protection is recommended.

• One side of dryer should be mounted to a stud

5700 McDermott Drive
Berkeley, IL 60163 U.S.A.
800-323-0701
www.worlddryer.com

IPX1

Warranty

5 year on motor
5 year on sensor
3 year on motor brushes

10 year limited warranty

92-MT007 Rev01