Item #_____________ C.S.I. Section 11420
HEAVY-DUTY GAS HOT PLATES
BASIC MODELS:
RHP-2-12 12" wide, 60,000 BTU/hr.
RHP-4-24 24" wide, 120,000 BTU/hr.
RHP-6-36 36" wide, 180,000 BTU/hr.
RHP-8-48 48" wide, 240,000 BTU/hr.
KEY FEATURES:
➤ Stainless steel exterior.
➤ 4" adjustable chrome plated legs.
➤ 30,000 BTU/hr. open burners with lift-off heads.
➤ Pilot ignition system for automatic burner lighting.
➤ Heavy-duty cast iron top grates.
➤ Full width pull out crumb tray.
3
➤
⁄4" rear gas connection and gas pressure regulator.
➤ One year limited parts and labor warranty.
Model RHP-4-24
Design Certified by the American Gas Association
Design Certified by the Canadian Gas Association
Listed by the National Sanitation Foundation
Approved by ______________________
Date: _____________________________
OPTIONAL FEATURES:
➤➤ Step-up burners. Rear burners elevated 4".
➤➤ Half hot top on rear burner, 11,000 BTU/hr. input.
➤➤ Stainless steel stand with undershelf.
DESCRIPTION:
Heavy-duty gas hot top range, Wolf Model No. ________.
Stainless steel front and sides. 4" adjustable chrome plated
legs. ______ 30,000 BTU/hr. open burners with lift-off heads.
_______ BTU/hr. total input. Pilot ignition system for automatic
burner lighting. Heavy-duty cast iron top grates. Full width pull
out crumb tray.
regulator.
Exterior dimensions: ____"w x ____"d x 14
on 4" legs.
3
⁄4" rear gas connection and gas pressure
3
⁄16" working height
MODEL: RHP SERIES
Heavy-Duty Gas Hot Plates
SPECIFY TYPE OF GAS WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
F-39075 (9/05)
Wolf Range Company
Division of ITW Food Equipment Group LLC
(800) 366-9653
www.wolfrange.com
Heavy-Duty Gas Hot Plates
INSTALLATION REQUIREMENTS:
1. A gas pressure regulator sized for this unit is included.
Natural Gas 5.0" W.C. Propane Gas 10.0" W.C.
2. Gas line connecting to appliance must be
larger. If flexible connectors are used, the inside diameter
must be the same as the
3
⁄4" iron pipe.
3. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained
by writing to the National Fire Protection Association,
1 Batterymarch Park, Quincy, MA 02269, www.NFPA.org.
When writing, refer to NFPA No. 96.
3
⁄4" diameter or
4. These units are manufactured for installation in accordance with ANSZ223.1A (latest edition), National Fuel
Gas Code. Copies may be obtained from The American
Gas Association, 400 N Capitol St. NW, Washington, DC
20001, www.AGA.org.
5. Clearances:
Combustible Non-Combustible
Rear 6" 0"
Sides 6" 0"
F-39075 (9/05)
APPROX.
MODEL NO. OF MAX. OVERALL OVERALL
SHIP WT.
NO. BURNERS BTU/HR. WIDTH DEPTH LBS. KG
RHP-2-12 2 60,000 12" x 313⁄8"95 43
RHP-4-24 4 120,000 24" x 313⁄8" 165 74
RHP-6-36 6 180,000 36" x 313⁄8" 265 119
RHP-8-48 8 240,000 48" x 31
NOTE: In line with its policy to continually improve its product, Wolf Range Company
reserves the right to change materials and specifications without notice.
This appliance is manufactured for commercial use only and is not intended for home use.
3
⁄8" 310 140