Instructions for use
ENGLISH |
Instructions for use |
Page 3 |
2
INDEX |
|
Chapter 1: INSTALLATION.................................................................................................. |
4 |
1.1. INSTALLING SINGLE APPLIANCE................................................................................................................. |
4 |
1.2. INSTALLING TWO APPLIANCES.................................................................................................................... |
4 |
1.3.ADJUST DOORS (IF AVAILABLE).................................................................................................................. |
4 |
Chapter 2: FUNCTIONS....................................................................................................... |
5 |
2.1.ON/STAND BY ................................................................................................................................................. |
5 |
2.2.SMART DISPLAY*............................................................................................................................................ |
5 |
2.3.6TH SENSE FRESH CONTROL / PROFRESH ............................................................................................... |
5 |
2.4. DOOR OPEN ALARM....................................................................................................................................... |
5 |
2.5.VACATION ....................................................................................................................................................... |
5 |
2.6.FAST COOL ..................................................................................................................................................... |
5 |
2.7.ZERO DEGREES DRAWER* ........................................................................................................................... |
6 |
2.8.FAN................................................................................................................................................................... |
6 |
2.9. TEMPERATURE SETTING............................................................................................................................... |
6 |
2.10.NO-FROST REFRIGERATOR COMPARTMENT............................................................................................ |
6 |
2.11.LED LIGHT SYSTEM*.................................................................................................................................... |
7 |
2.12.HUMIDITY CONTROLED CRISPER*............................................................................................................. |
7 |
Chapter 3: USE.................................................................................................................... |
7 |
3.1.HOW TO INCREASE FRIDGE STORAGE CAPACITY..................................................................................... |
7 |
3.2. NOTES.............................................................................................................................................................. |
7 |
Chapter 4: FOOD-STORAGE TIPS...................................................................................... |
7 |
4.1.AIR VENTILATION............................................................................................................................................ |
7 |
4.2.HOW TO STORE FRESH FOOD AND BEVERAGE......................................................................................... |
7 |
4.3.WERE TO STORE FRESH FOOD AND BEVERAGE....................................................................................... |
8 |
Chapter 5: FUNCTIONAL SOUNDS.................................................................................... |
8 |
Chapter 6: RECOMMENDATION IN CASE OF NO USE OF THE APPLIANCE................. |
9 |
6.1.ABSENCE / VACATION.................................................................................................................................... |
9 |
6.2.MOVING............................................................................................................................................................ |
9 |
6.3.POWER FAILURE............................................................................................................................................. |
9 |
Chapter 7: MAINTENANCE AND CLEANING.................................................................... |
9 |
Chapter 8: TROUBLESHOOTING GUIDE......................................................................... |
10 |
8.1.BEFORE CONTACTING AFTER-SALES SERVICE….................................................................................. |
10 |
8.2.FAILURES...................................................................................................................................................... |
10 |
Chapter 9: AFTER-SALES SERVICE................................................................................ |
11 |
Others: |
|
REVERSE DOOR SWING (VERSION_1)............................................................................................................ |
12 |
REVERSE DOOR SWING (VERSION_2)............................................................................................................ |
14 |
NOTE:
The instructions apply to several models, so there may be differences. Sections which only apply to certain appliances are indicated with an asterisk (*).
Functions which are dedicated specially for your already bought model of product you will find in
QUICK START GUIDE.
3
1. INSTALLATION
1.1. INSTALLING SINGLE APPLIANCE
To guarantee adequate ventilation, leave a space on both sides and above the appliance.
The distance between the rear of the appliance and the wall behind the appliance should be at least 50mm.
A reduction of this space will increase the Energy consumption of product.
1.2. INSTALLING TWO APPLIANCES
During installing the freezer 1 and the fridge 2 together ensure that the freezer is located on the left and the fridge on the right (as shown on the drawing). Left side of refrigerator is equipped with special device in order to avoid condensation problems between appliances.
We recommended installing two appliances together
using the linking-kit 3 (as shown on the drawing). You can buy it in Service.
1.3.ADJUST DOORS (IF AVAILABLE)
To level the doors using the adjustable lower hinge (select models)
If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw counterclockwise using a M10 wrench.
If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw counterclockwise using a M10 wrench.
50mm
50mm
5 ma |
x |
|
|
mm |
|
4
2.FUNCTIONS
2.1.ON/STAND BY 
This function turns On/Stand-by the refrigerator. To put the product in Stand-by, press & hold the On/Stand-by
button 
for 3 seconds. When the appliance is in Stand-by, the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. To switch the appliance On again, simply press the On/
Stand-By button 
.
2.2.SMART DISPLAY*
This optional function can be used to save energy. Please follow the instructions contained in the Quick Start Guide to activate/deactivate the function. Two seconds after activation of the Smart Display, the display goes off. To adjust the temperature or use other functions, it is necessary to activate the display by pressing any button.
After activation of the Smart Display, the display goes off, except the “ 
Sense Fresh Control” / 
“ProFresh” indicator. If Smart Display is active - to adjust the temperature or use other functions, it is necessary to activate the display by pressing any button.
After about 15 seconds without performing any action, the display goes off again and only the “ 
Sense Fresh Control” / 
“ProFresh” indicator remains
visible. When function is deactivated the normal display is restored.
The Smart Display is automatically disabled after a power failure. Remember that this function does not disconnect the appliance from the power supply, but only reduces the power consumed by external display.
Note: The declared appliance energy consumption refers to operation with the Smart Display function activated.
2.3.6TH SENSE FRESH CONTROL 
/
PROFRESH 
This function allows optimum storage conditions (regarding temperature and humidity) to be quickly reached inside the appliance. The fan must also be switched on for it to work properly. The “6th Sense Fresh Control” / “ProFresh” is activated by default To activate or deactivate this function – see enclosed Quick Start Guide.
After a power blackout or exit from Stand-by to normal mode, the “6th Sense Fresh Control” / “ProFresh” status resets to default i.e. active.
2.4. DOOR OPEN ALARM
The Alarm icon 
lights up blinking and the acoustic alarm sounds. The alarm is activated when the door is left open for more than 2 minutes. To disengage the door alarm close the door, or press once Stop Alarm button 
to mute the acoustic alarm.
2.5.VACATION
This function can be activated to reduce the energy consumption of the appliance during a period of absence.
Before activating the feature, all perishable food should be removed from the refrigeration compartment and make sure that the door is closed properly, since the refrigerator will maintain a suitable temperature to prevent the formation of unpleasant odors (+12°C).
To activate/ deactivate press the Vacation mode button for 3 seconds. When the function is enabled, the related symbol will light up and the temperature of the refrigerator compartment will be set to a higher setpoint (the temperature display will show the new temperature setpoint of +12°C).
Changing the temperature setpoint will automatically deactivate the function.
Attention:
• Incompatibility with the “Fast Cool” function
To guarantee optimal performance, the “Vacation” and “Fast Cool” functions cannot be used at the same time. Therefore, if the “Fast Cool” function has been already engaged, it has to be disengaged first to activate the “Vacation” function (and vice-versa).
2.6.FAST COOL
The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment.
Using Fast Cool 
function it is possible to increase the cooling capacity in the refrigerator compartment. To maximize the cooling capacity, please keep the fan switch on.
Attention:
• Incompatibility with the “Vacation” function
To guarantee optimal performance, the “Vacation” and “Fast Cool” functions cannot be used at the same time. Therefore, if the “Vacation” function has been already engaged, it has to be disengaged first to activate the “Fast Cool” function (and vice-versa).
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.
5
Loading...