6gb33005.fm5 Page 32 Tuesday, September 11, 2001 9:53 AM
INSTRUCTIONS FOR USE
BEFORE USING THE HOOD
SAFEGUARDING THE ENVIRONMENT
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
USING THE HOOD
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
INSTALLATION
32
6gb33005.fm5 Page 33 Tuesday, September 11, 2001 9:53 AM
BEFORE USING THE HOOD
To get best performance from the hood, please
read these user instructions carefully.
Packaging materials can be dangerous for children.
Keep the packaging material (plastic bags,
polystyrene, etc.) well out of their reach.
Make sure the hood has not been damaged during
transportation.
Installation and connection to the mains and exhaust
ducts must be carried out by a qualified technician, in
accordance with the manufacturers instructions and
local safety regulations.
SAFEGUARDING THE ENVIRONMENT
Packaging
1.
The packaging material is entirely recyclable, and marked
with the recycling symbol . Follow local regulations for
scrapping. Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children, as they
are potentially dangerous.
Appliance
2.
The appliance is made using recyclable materials.
Disposal must be carried out in accordance with local
environmental regulations for waste disposal.
Make the appliance unusable by cutting off the power
cord. The appliance must be delivered to an authorised
collection centre for scrapping.
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
Always disconnect the hood by switching off the
1.
electrical power supply before cleaning or
carrying out maintenance.
Exhaust air must not be conveyed through the same
2.
flue used by the heating system or other non-
electrical appliances.
Do not flambé food under the hood since the
3.
flames generated could cause a fire.
Never leave the pan unattended when frying
4.
since the cooking oil could ignite.
Regular maintenance guarantees smooth hood
5.
operation and high performance.
If the hood is used together with non-electrically
6.
powered appliances, ambient negative pressure must
not exceed 4pa (4 x 10-5bar).
For this reason, make sure the room is well
ventilated.
Regularly remove dirt deposits. Regularly clean or
7.
replace filters. Never use flammable materials to
convey exhaust air.
Declaration of conformity
This product has been designed, manufactured and
marketed according to the following:
- safety objectives of Low Voltage
Directive 73/23/EEC
- protection requirements of EMC
Directive 89/336/EEC amended by
Directive 93/68/EEC.
33