Whirlpool G2P 60C WH, G2P 60C BR PROGRAM CHART

6gb54071.fm5 Page 1 Friday, September 21, 2001 9:33 AM

G2P 60C

Last

First

Accessories:

•Grid

• Baking tray

PRODUCT DESCRIPTION SHEET

OVEN

First...Last

: Runner positions

Control panel Cooling fan (not visible) Upper heating element Grill element Oven light Lower heating element (not visible) Oven door hinges Oven door

Mechanical Automatic Off

Oven thermostat knob

Oven functions selector knob

Thermostat indicator light

5019 610 54071

CONTROL PANEL

Important:

door glass and of relevant mounting components, is available by the After-Sales Service. The use of the kit reduces the temperature of the outer oven surface and is strongly recommended if there are Kids in the house.

Code N°: 4819 310 39186.

An optional kit consisting of an oven

6gb54071.fm5 Page 2 Friday, September 21, 2001 9:33 AM

OVEN FUNCTIONS

Off

Oven light

BOTTOM HEATING FUNCTION

Use:

- To finish baking fruitcakes or cheesecakes.

- To thicken sauces. Use the lower heating function for the last 10 or 15 minutes of cooking time.

STATIC FUNCTION

Use when all the food is on the same runner level.

Pre-heat the oven to the required cooking temperature and place the food inside as soon as the red thermostat indicator light switches off.

Ideally, the shelf should be on the second runner level when using the static function.

GRILL FUNCTION

Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts.

The oven door must be open during the cooking cycle.

Pre-heat the grill for about 5 minutes.

Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to reduce smoke and fat spatters.

Turn over the meat about half-way through cooking time.

SWITCHING THE OVEN ON

Turn the selector knob to the required symbol.

The oven light switches on.

• Turn the thermostat knob clockwise to the required temperature.

The red thermostat indicator light switches on

PROGRAMMING COOKING TIME

Turn the knob fully clockwise.

Return the knob to the required cooking time.

When the preset cooking time has elapsed, the oven switches off.

To use the oven without programming the cooking time, set the knob to .

Warning

not switch on: to switch on the oven, either set the programmer knob to or set the required cooking time.

: If the programmer is on “0” the oven will

• When the required temperature is reached, the red thermostat indicator light switches off.

End of cooking cycle:

• Return the knobs to the OFF position (0 - •).

5019 610 54071