Whirlpool FL 1150 INSTRUCTION FOR USE

GB EV 1150

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Cotton

with prewash

95 °C

Coton

avec prélavage

95 °C

Labels

PROGRAMME CHART

Type of wash / Notes

Care

- for temperature selection, respect the manufacturer's recommendations on the care label

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

E. Programme selector

F. “Start/Pause” button

G. Programme sequence indicator

H. “Reset” button

Max.

Detergents and Additives Special options Spin

Load

Pre-

wash

Main

Wash

5.0 Yes Yes

Softener Intensive

rinse

Rinçage intensif

–

Spin

speed

reduction

Essorage

600 trs

Speed

rpm

1100

Cotton

40 - 60 - 95 °C

Synthetics

with prewash

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin

Gentle Spin

Drain

i : option / Yes : dosing required

Do not use liquid detergent.

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Coton

40 - 60 - 95 °C

Synthétiques

avec prélavage

60 °C

Synthétiques

30 - 40 - 60 °C

Délicat

30 °C

Rapide 30min.

30 °C

Laine

Froid - 40 °C

Lavage main

30 - 40 °C

Rinçage & Essorage

Essorage

Essorage court

Vidange

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. 5.0 – Yes

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5 – Yes

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. 3.0 – Yes

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. 1.0 – Yes

Textiles made of linen, silk, wool and viscose marked as “handwashable”. 1.0 – Yes

– Same as the last rinse and the final spin in the “Cotton” programme. 5.0 – –

– In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. 5.0 – – – –

– In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. 1.0 – – – –

– Water is drained only without any spinning. – – – – – – –

2.5 Yes Yes

2.5 – Yes

i i i

–

i i i

i i

– 400

i i i

Ladenl is a registered trademark of Whirlpool USA.

5019 601 10059

1100

1000

1100

1000

1100

1000

CONSUMPTION DATA

Temperature

Programme

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)

Cotton 95 5.0 49* 1.90 2:00

Cotton** 60 5.0 49 0.95 2:20

Cotton 40 5.0 49 0.60 2:00

Synthetics 60 2.5 50* 0.70 1:30

Synthetics 40 2.5 45 0.55 1:15

Delicates 30 1.5 50 0.50 0:45

Quick wash 30 3.0 40 0.40 0:30

Wool 40 1.0 55 0.60 0:45

Handwash 40 1.0 45 0.60 0:40

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergents as indicated on the front page and as described in your Instructions for Use. Close the door and turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start/Pause” button flashes.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Intensive rinse” button

• More wather is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with allergies.

“Spin speed reduction” button (600rpm)

• Reduces the predetermined automatic maximum

spin speed to treat your laundry more gently.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Laden is a registered trademark of Whirlpool USA.

5019 601 10059