Whirlpool FL 1010 INSTRUCTION FOR USE

FL 1010GB

A. “On/Off” Button

Cotton Synthetics Delicates

During the selected washing programme the programme selector knob moves by steps clockwise through the phases

rinse and spin

. Each step takes from some seconds

prewash, main wash

to several minutes.

❉

: optional / Yes : dosing required

For improved garment care spin speed is restricted to 500 rpm in this programme.

For improved garment care spin speed is null in this programme.

Programme

Cotton

with prewash

Synthetics

with prewash

Delicates

with prewash

Cotton

short

Daily

Synthetics All textiles

Delicates

Wool

Silk

Rinse + spin

Spin

Gentle spin

Drain

Care

Labels

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Slightly to normally soiled textiles made of cotton and/or synthetics. Normally to heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen,

Trevira), polyamide (Perlon, Nylon) or blends with cotton. Normally soiled overalls and sports wear made of cotton, polyester, polyamide and

blends with cotton. Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and identified as

machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.

—

The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

—

programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

—

Drain only - no spinning. Alternative method of terminating the synthetic, delicate and wool

—

programmes and for premature removal of the laundry.

Type of wash/Notes

Max

Load

5.0

2.5

1.5

5.0

3.0

2.5

1.5

1.0

5.0

1.5

Detergents and additives Special options Spin

Bleach Softener Main Wash Pre-wash Easy Ironing Rinse Hold

❉❉

— —

❉ ❉

❉❉

— —

—

❉ ❉

❉

Repassage

Rapide

Yes Yes Yes Yes Yes Yes

Yes

Yes Yes

Yes

—

— —

— ——

—— ——

❉❉ ❉❉

—

❉❉

❉❉ ❉❉

❉❉

—— —

Arrêt Cuve

Pleine

❉

❉ ❉

———— — — ———— — —

Speed

Selector

Knob

max rpm

1000 Max. 95°

500 500

1000 Max. 95°

1000 Max. 60°

500 500

500

1000 1000

500

Temperature

Selector

°C

Max. 60° Max. 40°

Max. 60° Max. 60°

Max. 40°

Max. 30°

— — —

—— — — — — — — —

Programme

Selector

1 2 3

6 7

8 9

5019 601 10026

CONSUMPTION DATA

PROGRAMME CHANGE

NOTES AND INDICATIONS FOR USE

Temperature

Programme

Cotton 95 4.5 59 1.70 2:05 Cotton 60 5.0 59 0.95 2:20 Cotton 40 4.5 44 0.60 2:05

Daily 40 3.0 40 0.50 1:00 Synthetics 60 2.0 55 0.80 1:30 Synthetics 40 2.0 55 0.60 1:20

Delicates 30 1.5 60 0.50 0:45

Wool 30 1.0 60 0.30 0:40

Silk 30 1.0 60 0.30 0:50

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Open the tap.

2. Set the programme selector to the desired programme.

3. Set the temperature selector to the desired temperature.

4. Set the spin selector to the desired speed.

5. Special options can be selected.

6. Check that the door is well closed and turn on the washing machine by pressing the “ON/OFF” button.

Selector

(°C)

Load

(kg)

Water

(l)

SELECT ANY DESIRED OPTION

“Easy Ironing” button

• Can be used together with Cotton, Synthetics and Daily programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very soft.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics”, “Daily” and “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.

Energy

(kWh)

Programme

(hours:minutes)

Approx.

Duration

To reselect a programme when a cycle has already begun:

1. Switch off the appliance by pressing the “ON/OFF” button.

2. Select the new programme.

3. Start the programme by pressing the “ON/OFF” button.

PROGRAMME END

1. At the end of the programme the programme selector moves to the stop position.

2. To unload the machine wait for the door to unlock (about 1 minute).

3. Switch off the appliance, open the door and take out the laundry.

4. Close the tap and leave the door ajar to allow the drum to dry out.

• WATER LEVEL It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.

• SPIN SPEED CONTROL Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and machine damage and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.

• MOTOR NOISE The running noises of the new, electronicallycontrolled motor are not the same as the ones you are used to from your old appliance. Don’t be surprised - modern technology has a modern sound.

• CLEANING THE FILTER To ensure an impeccable function of the pump, check the filter regular and clean it if necessary.

5019 601 10026