Whirlpool AWOE 9759, AWOE 9558 S INSTRUCTION FOR USE
30106276GB.fm Page 1 Thursday, April 23, 2009 5:56 PM
GB PROGRAMME CHART
A. Programme selector
B. Display
C. “Temperature” button
D. “Spin speed” button
E. “Start delay” button
F. “Start (Pause)” button
G. “Reset/Drain” button
H. “Favourites” button
Programme
70 - 95 °C 9.0
Cotton /
Coloured
20 - 60 °C
Tempe-
rature
Care
Labels
Max
Load
- Respect the manufacturer’s recommendations on the care label
kg
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested following a
9.0
similar methodology to the NF EN 13697 standard of Nov. 2001.
Type of wash/Notes
A
F
K
B
I
}
L
J
G
C D
E H
Detergents and additives Selectable options
Pre-
Main
wash
Yes
Softener Pre-
wash
❉❉ ❉ ❉ ❉❉❉
wash
❉
I. Programme sequence indication
Add garment Programme
in process
Programme
finished
J. “Child lock” indication
K. “Detergent overdosage” indication
L. Red failure indications
Start
Easy
ironing
Intensive
rinse
delay
Spin
speed
Spin
Max
Spin
Speed
rpm
max.
Synthetics
Delicates
Wool
Jeans
Big Items
Sport
Rinse & Spin
Spin
❉
optional / Yes : dosing required
:
1)
For improved garment care, spin speed is restricted in these programmes.
20 - 60 °C
20 - 40 °C
20 - 40 °C 2.0
20 - 40 °C 2.0
20 - 60 °C
20 - 60 °C
20 - 30 °C
20 - 60 °C 9.0
20 - 60 °C
20 - 30 °C 3.0
——
——
3.5
2.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
7.0
3.0
3.5
6.0 Slightly to normally soiled textiles made of co tton and/or synthetics.
9.0 Same as the last rinse and the final spin in the “Cotton” programme.
9.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine
washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate lingerie
(use of a laundry net strongly recommended).
This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.
Normally soiled cotton jeanswear and garments made of robust jeanslike material such as
trousers and jackets.
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other
artificial fibers; sleeping bags, bathmats and similar items.
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.
This programme includes a prewash cycle – you can add detergent also to the prewash
chamber. Do not add any softener.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run
overnight to additionally profit from the more favourable energy rates. To avoid noise of
spinning at night, set spin speed to “0” and start spin programme in the morning, or define
programme start with “Start delay” accordingly.
Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with
cotton.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702
Yes
❉
Yes
❉
Yes
—
Yes
—
Yes
❉
Yes
❉
Yes
❉
Yes
—
Yes
—
Yes
—
——
❉❉ ❉ ❉ ❉❉❉
❉❉
————
❉
————
❉
❉❉ ❉
❉❉
—— —
———
❉
——
❉
————
❉
———
❉
———
——
——
❉❉❉
❉❉❉❉
❉❉❉
❉❉❉❉
❉❉❉
———— — — —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06276
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
max.
1000
1000
400
max.
1000
max.
max.
max.
max.
max.
max.
1)
1)
1)
1)
Black process 45.0° 150.0 LPI
30106276GB.fm Page 2 Thursday, April 23, 2009 5:56 PM
CONSUMPTION DATA
Programme
Temp e ratu r e
(°C)
95 9.0 87
Cotton
***
60 9.0 64 1.53 2:20
Cotton 40 9.0 82 0.80 2:05
Synthetics 60 3.5 46
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool 40 2.0 60 0.60 0:45
40 2.0 45 0.60 0:40
Jeans 40 7.0 95 0.85 2:21
Big Items 40 3.0 74 0.75 1:30
Sport 30 3.5 54 0.55 1:34
60 9.0 80 1.08 4:00
40 6.0 73 0.60 1:00
30 3.0 30 0.20 0:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditi ons
*
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme; the light
of the
“Start (Pause)”
indicated on the display can be altered by pressing the
speed
“Temperature” button or the “Spin speed” button.
button blinks. The
temperature
SELECT ANY DESIRED OPTION
When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating
the “Prewash” option.
“Clean+” button
• Choose this option if you use an in-wash additive for stain removal
(powder , for example “Vanis h”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.
• Choose temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
and
Load
Water
(kg)
• Appropriate for use of stain removers and bleaches on oxygen
“Easy ironing” button
• Makes ironing easier by an increased water quantity and a very
“Intensive rinse” button
spin
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft water or
“Spin speed” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled but
• If you select “Rinse hold” , the laundry remains in the last
Energy
(l)
(kWh)
2.60 2:10
**
0.85 1:35
**
basis.
Chlorine or perborate bleaches must not be used!
gentle spin.
for washing baby linen, and helps people with allergies.
intermediate spin peaks remain during rinse. The water is
drained out only.
rinse water without progressing to the final spin cycle, to avoid
creasing and prevent colours from changing. To activate the
“Rinse hold”, press the “Spin speed” button repeatedly until the
“Rinse hold” symbol on the display lights up.
- The wash programme stops to “Rinse hold” when the
“Rinse hold” symbol on the display blinks; the light of
“Start (Pause)”
- To terminate the “Rinse hold” by draining the water,
without any spinning, press the
- To terminate the “Rinse hold” by spinning the laundry, press
the “Spin speed” button to select the desired spin speed and
then
“Start (Pause)”
- Do not leave the laundry to soak for too long in the “Rinse hold”.
Approx. Programme Duration
(hours : minutes)
button blinks as well.
“Start (Pause)”
to start the spin cycle.
*
button.
SAVE YOUR FAVOURITE PROGRAMMES
If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.
• Select the desired programme, temperature, spin speed and
option(s), push and hold the
3 seconds. The lamp next to
then lights up - the programme setting is saved.
Next time you want to use your individual programme setting,
select the programme, push the
pushing
“Start (Pause)”
If you want to replace the saved programme setting by another
one, proceed as already described above.
“Favourites”
“Favourites”
“Favourites”
.
button for at least
shortly blinks and
button and start by
START DELAY
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
• Select programme, temperature, spin speed and options.
• Press the Start delay button to select one of the delay time
steps between 0:30 and 23:00 hours.
•Press the
• The time delay indication disappears when the programme
To cancel the “Start delay”
..before you press the “Start (Pause)” button:
• Press the
..after having pressed the “Start (Pause)” button:
Press the
delay time disappears from the display . Or press
twice to start the selected programme immediately.
“Start (Pause)”
The countdown of the delay time begins; the clock symbol next to
the delay time and the colon between hours and minutes blink.
starts and it is replaced by the remaining programme time.
“Reset / Drain”
“0:00” - the delay time disappears after a few secon ds.
“Reset/Drain”
button.
button, or set the start delay time to
button for at least 3 seconds; the start
“Start (Pause)”
“ADD GARMENT” INDICATION
Before starting a programme, the symbol lights to show that the
door can be opened to add more washing. As soon as you press
“Start (Pause)”
programme and must on no account be forced open. In case you
have to open it urgently during a running programme, refer to
“Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly
closed, the “Add garment” indication will blink.
, the door will lock until the end of the
PROGR AMME START
Open the tap and press the
“Start (Pause)”
garment” indication goes out, and the lit bubbles indicate that the
programme is in process. In some phases, the remaining
programme time is newly calculated - if this is the case, the “6
sense” indication on the display will fade, and the remaining
programme time is replaced by an animation.
button light becomes constant. The “Add
“Start (Pause)”
button; the blinking
th
CHILD LOCK
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
• Turn the programme selector to a programme position, or run
a programme as usual.
• Press the “Temperature” and the “Spin speed” button
simultaneously for at least 3 seconds. The “Child lock” symbol
will shortly blink and then light up to indicate that the
child lock is active.
The programme setting cannot be changed anymore; the only change
possible is to switch the washer off by turning the programme selector
to the “Off/O” position. To deactivate the child lock, proceed in the
same way as for activating it.
RED FAILURE INDICATIONS
If one of the red failure indications on the display lights up, refer to
the “Troubleshooting Guide” in your “Instructions for Use”.
PROGRAMME END
• The display shows “End”, and the “Programme finished”
indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
• Leave the door ajar to allow the drum to dry.
• If you do not turn the programme selector to the “Off / O”
position, all lights of the control panel go out after a few
minutes to save energy - only “End” will remain on the display.
DETERGENT OVERDOSAGE INDICA TION
The symbol will blink at the end of the programme if you used too
much detergent. Use less detergent next time.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
2. Select the new programme, temperature, any options and
3. Press the
“Start (Pause)”
The light blinks.
another spin speed if you want.
“Start (Pause)”
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
button to pause the programme.
button again. The new
RESET A RUNNING PROGRAMME BEFORE
THE END
The
“Reset/Drain”
•Press the
animation appears on the display. Any existing water is drained
out before the door can be opened.
button cancels a programme before the end.
“Reset/Drain”
button for at least 3 seconds; an
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06276
Black process 45.0° 150.0 LPI
Loading...