Whirlpool AWO 6346, AWO 6426, AWO 6466, AWO 6366 INSTRUCTION FOR USE

30106235GB.fm Page 1 Monday, November 10, 2008 1:57 PM
GB PROGRAMME CHART
A. “Door open” indication This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
C D
H
}
A B
E. Programme selector F. “Start (Pause)” button G. Spin speed selector H. Programme sequence indicator
B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication
Max
Cotton
60 - 95 °C
Cotton
40 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Rinse & Spin Spülen & Schleudern
Spin Schleudern
Drain Abpumpen
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
Koch-Buntwäsche
60 - 95 °C
Buntwäsche
40 °C
60 °C
Pflegeleicht
30 - 40 - 60 °C
Feinwäsche
30 - 40 °C
Mischwäsche
40 °C
30 °C
Wolle
kalt - 40 °C
Handwäsche
30 - 40 °C
Care
Labels
Load
- For temperature selection, respect the manufacturer’s
kg
recommendations on the care label
6.0 Normally to heavily soiled bed linen, table linen and underwear,
towels, shirts etc. made of cotton and linen.
5.0 Slightly to normally soiled bed linen, table linen and underwear,
towels, shirts etc. made of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash
6.0
duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.
— —
——
Normally soiled blouses, shirts, overalls etc. made of polyester
2.5
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses. Slightly to normally soiled textiles made of cotton and/or
3.0
synthetics. Shortly worn outer clothing made of cotton, polyester, polyamide
3.0
and blends with cotton. Only woollens, labelled with the Woolmark and identified as
1.0
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.
6.0
Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the
6.0
“Cotton” programme. Drain only - no spinning. Alternative method of terminating
programme after “Rinse Hold”.
Type of wash/Notes
I
E
F GJ
Detergents and additives Special options
K
Pre-
Main wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Softener Start
❉❉❉❉❉ ❉❉❉
❉❉
❉❉❉❉❉ ❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
wash
—— ———
———
delay
Start-
vorwahl
❉ ❉
I. “Reset” button J. “Start delay” button K. Time display
Max
Pre-
wash
Vor-
wäsche
—— —
——
—— — —
—— — —
—— — —
—— —
Easy
ironing
Leicht
bügeln
Intensive
Intensiv
spülen
rinse
Rinse
hold
Spül-
stopp
❉❉❉
——
❉❉
❉❉❉❉
❉❉
❉❉
❉❉
❉❉❉
—— — ——
Variable
spin
Schleu-
dern
Spin
Speed
rpm
max.
max.
1)
1000
1)
1000
max.
max.
1)
1000
2)
400
max. max.
—— — ——— —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06235
Black process 45.0° 150.0 LPI
30106235GB.fm Page 2 Monday, November 10, 2008 1:57 PM
CONSUMPTION DATA
Programme
Cotton 95 6.0 59 Cotton
***
Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 49 0.72 4:00 Synthetics 60 2.5 50 Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45 Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* **
***
Handwash 40 1.0 45 0.50 0:40
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of th e main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.
Tem pe ra tu re
(°C)
60 6.0 49 1.02 2:20
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.
1. Turn the programme and temperature.
2. The programme (in hours and minutes), and the
(Pause)”
3. The lights up.
programme selector
time display
indication lamp
shows the duration of the chosen
indication lamp is flashing.
of the predefined spin speed
to the desired
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Clean +” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.
• Selectable for programmes “Cotton” and “Synthetics”; choose
temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
Load
(kg)
“Start
Water
Energy
(l)
(kWh)
1.90 2:00
**
0.80 1:35
**
• Appropriate for use of stain removers and bleaches on oxygen basis.
not be used!
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft water , washing baby linen and helps people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
The programme stops to “Rinse hold” at the
Note:
time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the
(Pause)”
Terminate the “Rinse hold” option:
• Press the will terminate automatically with the final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the
button flashes.
“Start (Pause)”
Approx. Programme Duration
(hours : minutes)
Chlorine or perborate bleaches must
button; the programme
“Start (Pause)”
button.
*
“Start
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay time by 1 to 23 hours;
• Press the The indication light next to the “Start Delay” button lights up and the countdown of the delay time begins.
• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.
• Once having pressed the number of hours preselected can be reduced by pressing again the “Start Delay” button.
To cancel the “Start Delay” ..before you press the “Start (Pause)” button:
• Turn the programme selector to another position or press the
..after having pressed the “Start (Pause)” button:
• Press the start delay time disappears from the time display.
“Start (Pause)”
“Reset”
“Reset”
button.
“Start (Pause)”
button.
button for at least 3 seconds - the
button, the
PROGR AMME S TART
Open the tap and press the indication lamp next to the up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.
“Start (Pause)”
“Start (Pause)”
button. The
button lights
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the programme. The light flashes.
2. Select the new programme (with temperature), any options and another spin speed if you want.
3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
“Start (Pause)”
“Start (Pause)”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds. Any
“Reset”
existing water is drained out before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06235
Black process 45.0° 150.0 LPI
Loading...