Whirlpool AWE 6419P Product Sheet

GB

PROGRAMME CHART

C

This washing machine is equipped with automatic

A.Programme selector

I

safety functions which detect and diagnose faults at

B.“Start delay” button

Stop

Wirowanie

G

an early stage and react appropriately:

Odkreckran

Wstepne˛ Zasadnicze

Plukanie

plukanie Wypompow.

Drzwiotwarte

J

Wyczyscfiltr

1h.

3h.

6h.

9h.

12h.

H

H.“Service” indication

C. Programme sequence indicator (over the line)

Wypompowanie

Bawelniane

Serwis

Start delay indicator (under the line)

B startu

Wirowanie

60° Nocne

Anulowanie

I. “Water tap closed” indication

40°

Opóznienie

Plukanie

40°

F

i wirowanie

D.“Variable spin” button

Pranie

co

20°

40°

Start

Super

Stop

J. “Clean pump” indication

plukanie Wirowanie

Bawelna 60°

60° Syntetyczne

Szybkie plukanie

wstepne˛

Welniane/

(Pauza)

E. “Start/Pause” button

Pranie reczne40°

°

Szybki

40° Delikatne

F. “Reset” button

Codzienne 40°

A

E

D

Acustic noise level :

Washing -

59 dB(A) / 1 pW

G.“Door open” indication

Spinning -

900 rpm, 76 dB(A) / 1 pW

800, 700 rpm, 72 dB(A) / 1 pW

Max.

Detergents and Additives

Special options

Max.

Care

Load

Type of wash / Notes

Pre-

Main

Softener

Start

Pre-

Rapid

Intensive

Rinse

Spin

Spin

Programme

wash

Wash

delay

wash

rinse

hold

Speed

Labels

- for temperature selection, respect the manufacturer's recommendations on the care label

Opóźnienie

Pranie

Szybkie

Super

Stop

Wirowanie

kg

rpm

startu

wstêpne

płukanie

płukanie

Cotton /

Bawełniane

Normally to heavily soiled bed linen, table linen, towels and garments made of cotton and/or linen.

Antibacterial

5.0

Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria

i

Yes

i

i

i

i

i

i

i

max.

40 - 60 - 95°C

40 - 60 - 95°C

removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Heavily soiled and robust laundry made of cotton, synthetics and their blends.

Overnight

Nocne

5.0

Economical energy consumption by prolonged wash duration - ideal to be run overnight to profit from more

–

Yes

–

–

max.

favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin

i

i

i

i

i

60°C

60°C

programme in the morning, or by defining programme start with “Start delay” accordingly. - For garments with a

high share of synthetic fibres, we recommend to use a laundry net.

Synthetics

Syntetyczne

3.0

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,

i

Yes

i

i

i

i

i

i

i

max.

30 - 40 - 60°C

30 - 40 - 60°C

Nylon).

Delicates

Delikatne

1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

i

Yes

i

i

i

–

–

i

i

max.

30 - 40°C

30 - 40°C

Daily load

Codzienne

3.0

Lightly to normally soiled textiles made of cotton and/or synthetics.

–

Yes

i

i

–

–

i

i

i

max.

40°C

40°C

Quick wash 15’

Szybki

3.0

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

–

Yes

i

i

–

–

–

i

i

max.

30°C

30°C

Refresh programme. Use lowest recommended detergent amount.

Wool/Handwash

Wełniane/

Woolens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk,

1.0

linen, wool and viscose marked as handwashable

–

Yes

i

i

–

–

–

i

i

max.

20 - 40°C

Pranie rêczne

This programme is tested and approved by The Woolmark Company for machineand handwashable wool.

Select spin speed according to the manufacturer‘s recommendation on the care label

Eco cotton

co Bawelna

5.0

Normally soiled cotton laundry.

–

Yes

–

–

max.

Most favourable programme in terms of combined water and energy consumption for washing cotton laundry.

i

i

i

i

i

40 - 60°C

- Reference programme for the Energy Label.

Rinse & Spin

Płukanie i

–

5.0

Same as the last rinse and the final spin in the “Cotton” programme.

–

–

i

i

–

–

i

i

i

max.

wirowanie

Spin

Wirowanie

–

5.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

–

–

–

i

–

–

–

–

i

max.

Drain

Wypompowanie

–

–

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

–

–

–

i

–

–

–

–

–

–

Yes = dosing required / i = optional	The Wool/Handwash cycles of this machine have been tested and approved by The Woolmark Company for
	the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are
	washed according to the instructions on the garment label and those issued in this programme chart.
	M0804

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 11171

CONSUMPTION DATA

					Energy	Approx. Programme Duration
	Programme	Temperature	Load	Water	without	(hours : minutes)
		(°C)	(kg)	(l)	“Rapid”	without “Rapid”	with “Rapid”
					(kWh)
	Cotton/Antibacterial	95	5.0	50*	1.70	2:05	1:55
	Cotton	60	5.0	47	0.95	2:20	1:45
	Cotton	40	5.0	47	0.64	2:05	1:30
	Overnight	60	5.0	47	0.67	4:00	-
	Synthetics	60	3.0	50*	0.90	2:05	1:14
	Synthetics	40	3.0	40	0.50	1:50	0:59
	Delicate	40	1.5	50	0.55	0:45	-
	Delicate	30	1.5	50	0.50	0:41	-
	Daily load	40	3.0	40	0.45	1:00	-
	Speed 15’	30	3.0	30	0.15	0:15	-
	Wool/Handwash	40	1.0	40	0.55	0:35	-
	Wool/Handwash	20	1.0	40	0:40	0:30	-
	Eco cotton**	60	5.0	47	0.89	2:45	-
	Eco cotton**	60	2.5	32	0.68	2:10	-
	Eco cotton	40	5.0	47	0.65	2:00	-
	Eco cotton**	40	2.5	32	0.52	1:45	-

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

*To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

**Reference Programmes for Energy Label.

			soft water, washing baby linen and helping people
	PREPARATION OF THE WASH CYCLE
			with allergies.
	1.	Load the machine, close the drum doors and check
			“Rinse Hold” button
		that they are properly locked.
			• The laundry remains in the last rinse water without
	2.	Add detergent and eventual additives as described on
		the front page and in your Instructions for use.	progressing to the final spin cycle to avoid creasing
			and prevent colours from changing.
	3.	Close the lid.
			• This option is particularly recommended for
	4.	Turn the programme selector to the desired
			the “Synthetics”, “Daily load” and “Delicates”
		programme and temperature. The indication next
			programmes.
		to the “Start/Pause” button blinks. The indication
			• It is useful if you want to postpone spinning to a later
		lamp of the predefined spin speed lights up.
			time, or if you want to drain out only.
	SELECT THE DESIRED OPTION(S)		• If you select “Rinse Hold”, do not leave items to soak
	When the combination of programme and additional		for too long.
	option(s) is not possible, the indication lights switch off		• As soon as the appliance stops in the rinse hold, the
	automatically. Unsuitable combinations of options are		“Rinse hold” lamp of the sequence indicator lights
	deselected automatically.		up and the lamp next to the “Start/Pause” button
	“Prewash” button		flashes.
	•	Only for heavily soiled loads (for example sand,	Terminate the “Rinse Hold” option:
		granular dirt) sensible. Increases the cycle time by	• Press the “Start/Pause” button; the programme will
		approximately 15 min.	terminate automatically with the final spin cycle for
	•	Do not use liquid detergent for the main wash when	the present wash programme.
		activating the Prewash option.	• If you do not wish to spin the clothes, turn the
	“Rapid” button		programme selector knob to the “Drain” programme
	•	Enables quicker washing by shortening the	and press the “Start/Pause” button.
		programme duration.	“Spin” button
	•	Recommendable for small loads or only lightly soiled	• Every programme has a predefined spin speed.
		laundry.	• Press the button to set another spin speed.
	“Intensive rinse” button		• If spin speed “0” is selected, the final spinning is
	•	More water is added and rinse cycle is prolonged.	cancelled but intermediate spin peaks remain during
	•	This option is particularly suitable for areas with very	the rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Select programme, spin speed and options.

•Press the “Start Delay” button several times to select a delay time of 1, 3, 6, 9 or 12 hours. The corresponding indicator lamp lights up.

•Start the programme (see “Progremme Start”). The indication next to the “Start delay” button lights up and goes off when the programme starts.

•Once having pressed the “Start/Pause” button, the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication.

•After the “Start/Pause” button has been pressed, the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay”

..before you press the “Start/Pause” button:

•Turn the programme selector to another position or press the “Reset” button.

..after having pressed the “Start/Pause” button:

•Press the “Reset” button for at least 3 second. The start delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start(Pause)” button. The blinking light next to the “Start(Pause)” button becomes constant. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

•All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open lid and drum and unload the machine.

4.Leave the lid open for some time to allow the interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start(Pause)” button to pause the programme. The light blinks.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press the “Start(Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

•Press the “Reset” button for at least 3 seconds. The water is drained out; it may last a while until you can open the lid.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 11171