Whirlpool AMD 396, AMD 398 INSTRUCTION FOR USE

INSTRUCTIONS FOR USE

	Page
SAFETY PRECAUTIONS	5
PART IDENTIFICATION	6
PART NAMES	7
OPERATING INSTRUCTIONS	8
MAINTENANCE	9
OPERATION TIPS	10
ELECTRICAL SPECIFICATIONS	11
TROUBLESHOOTING	11
INSTALLATION INSTRUCTIONS	12
ELECTRICAL CONNECTION FOR GREAT BRITAIN	14
AND IRELAND ONLY

4

SAFETY PRECAUTIONS

Symbols in this User's Manual are interpreted as shown below:

Be sure not to do.

The feature of the appliance, not a fault.

Pay attention to such a situation.

Be sure to follow the instruction.

Grounding is necessary.

Warning: Incorrect handling could cause a serious hazard, such as death, serious injury,etc.

Do not use the power supply circuit breaker or pull off the plug to turn the appliance off during operation. This may cause a fire due to spark, etc.

Keep the power supply circuit breaker or plug from dirt. Connect the power supply cord to it firmly and correctly, lest an electric shock or a fire break out due to insufficient contact.

Use correct power supply according to the rating plate. Otherwise, serious faults maybe occur or a fire maybe break out.

Do not knit, pull or press the power supply cord, lest the power supply cord be broken. An electric shock or fire is probably caused by a broken power supply cord.

Never insert a stick or similar to the unit. Since the fan rotates at high speed, this may cause injuries.

It is harmful to your health if the cool air reaches you for a long time. It is advisable to make the air flow be deflected to all the room.

Turn off the appliance first before cutting off power supply when malfunction occurs.

Do not repair the appliance by yourself.If this is done incorrectly, it may cause an electric shock, etc.

Prevent the air flow from reaching the gasburners or stove.

Do not touch the operation buttons when your hands are wet.

Pull off the plug to stop it when the operation is abnormal (a peculiar odor is smelled, etc.), or it may cause an electric shock, etc.

It is the user's responsibility to make the appliance be grounded according to local codes or ordinances by a licenced person.

5

PART IDENTIFICATION

Front view

• For mechanical control model

Front Panel

Air Outlet

Vertical Air Vane

Exterior Air Inlet

Horizontal Air Vane

Exterior Air Inlet

Fresh Air Lever

Interior

Air Inlet Control Panel Power Cord

Grille

Fig. 1

Note: The figures in this manual are based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner you have selected.

6