Whirlpool AKR 014/IX, AKR 014/WH, AKR 012/IX, AKR 028/IX, AKR 011/NB INSTRUCTION FOR USE
N C
INTRODUCTION
BEFORE USING THE COOKTOP
1. Clean the cooktop.
2. Switch on the hotplates to remove fumes and smells coming from the protective greases.
EVERYDAY USE
1. Turn the control knob to the position required.
2. To switch off, turn the knob back to “0”.
Please read the instructions for use carefully, to become familiar with your cooktop.
22
M Y
22
N C
CONTENTS GB
FEATURES Pages 24-25-26
BEFORE USING THE COOKTOP Page 27
TIPS FOR SAFEGUARDING THE ENVIRONMENT Page 27
WARNINGS FOR THE USE OF ELECTRICAL APPLIANCES Page 28
PRECAUTIONS AND GENERAL SUGGESTIONS Page 28
2 ELECTRIC HOTPLATE COOKTOP Page 29
GLASS CERAMIC COOKTOP Page 31
CLEANING AND MAINTENANCE Page 34
TROUBLE-SHOOTING GUIDE Page 35
AFTER-SALES SERVICE Page 35
INSTALLATION Page 36
23
M Y
23
N C
FEATURES
AKR 024
2 ELECTRIC HOTPLATE COOKTOP
- Electrical insulation Class I.
- Protection against overheating of adjacent
surfaces Type Y.
ELECTRIC HOTPLATES
1. High-speed electric hotplate Ø 145 – 1500 W
2. High-speed electric hotplate Ø 180 – 2000 W
CONTROL PANEL
3. Front hotplate (1 – 6) control knob (1)
4. Rear hotplate (1 – 6) control knob (2)
5. Hotplates ON indicator light
AKR 010
2 ELECTRIC HOTPLATE COOKTOP
- Electrical insulation Class I.
- Protection against overheating of adjacent
ELECTRIC HOTPLATES
1. High-speed electric hotplate Ø 145 – 1500 W
2. High-speed electric hotplate Ø 180 – 2000 W
CONTROL PANEL
3. Front hotplate (1 – 6) control knob (1)
4. Rear hotplate (1 – 6) control knob (2)
5. Hotplate ON indicator light
surfaces Type Y.
24
M Y
24
N C
AKR 012
2 ELECTRIC HOTPLATE COOKTOP
- Electrical insulation Class I.
- Protection against overheating of adjacent
surfaces Type Y.
ELECTRIC HOTPLATES
1. High-speed electric hotplate Ø 145 – 1500 W
2. High-speed electric hotplate Ø 180 – 2000 W
CONTROL PANEL
3. Front hotplate (1 – 12) control knob (1)
4. Rear hotplate (1 – 12) control knob (2)
5. Hotplate ON indicator light
AKR 028
GLASS CERAMIC COOKTOP
- Electrical insulation Class I.
- Protection against overheating of adjacent
COOKING ZONES
1. “Quick light star” cooking zone Ø 145 – 1200W
2. “Quick light star” cooking zone Ø 180 – 1700W
CONTROL PANEL
3. Front zone control knob (1)
4. Rear zone control knob (2)
5. Front zone residual heat indicator light (1)
6. Rear zone residual heat indicator light (2)
7. Cooking zone ON indicator light
surfaces Type Y.
25
M Y
25
N C
AKR 011
GLASS CERAMIC COOKTOP
- Electrical insulation Class I.
- Protection against overheating of adjacent
surfaces Type Y.
COOKING ZONES
1. “Quick light star” cooking zone Ø 145 – 1200W
2. “Halogen” cooking zone Ø 180 – 1800W
CONTROL PANEL
3. Frontzone1–6controlknob(1)
4. Rearzone1–12controlknob(2)
5. Front zone residual heat indicator light (1)
6. Rear zone residual heat indicator light (2)
7. Cooking zone ON indicator light
AKR 014
GLASS CERAMIC COOKTOP
- Electrical insulation Class I.
- Protection against overheating of adjacent surfaces
COOKING ZONES
1. “hilight” cooking zone Ø 145 – 1200W
2. “hilight” cooking zone Ø 180 – 1800W
CONTROL PANEL
3. Front zone control knob (1)
4. Rear zone control knob (2)
5. Front zone residual heat indicator light (1)
6. Rear zone residual heat indicator light (2)
7. Cooking zone ON indicator light
Type Y.
26
M Y
26
N C
BEFORE USING THE COOKTOP
x
For best use of your cooktop, read the
instructions for use carefully and keep them in
asafeplace.
x
This appliance must only be used for the
purpose for which it was designed, i.e. for
cooking foods.
Any other use should be considered incorrect
and therefore dangerous.
x
The manufacturer declines all responsibility for
damage caused by unreasonable, incorrect or
rash use of the appliance.
x
Do not try to alter the technical features of
the appliance, because this could be very
dangerous.
x
Packaging materials (plastic bags, polystyrene pieces,
etc...) must be stored out of the reach of children as
they are potentially dangerous.
x
Check that the cooktop has not been damaged
during transport. If in doubt, consult a specialised
engineer.
x
Make sure that the installation and electrical
connections are made by a qualified electrician
following the manufacturer’s instructions and
in compliance with local regulations in force.
TIPS FOR SAFEGUARDING THE ENVIRONMENT
1. Packaging
The packaging material is 100% recyclable and is
marked with the recycling symbol
type of material which must be taken to the local
collection centres.
2. Product
The cooktop has been manufactured with recyclable
material. Dispose of it following the local regulations
for the disposal of waste.
Before disposing of it make it unusable by cutting
off the supply cable.
to identify the
Ù
27
M Y
27
Loading...