TM
502USB
802USB 1002FX / USB
1202FX / USB
OPERATING MANUAL AND USER GUIDE
www.wharfedalepro.com
OPERATING MANUAL AND USER GUIDE
TABLE OF CONTENTS |
|
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS .................................................... |
2 |
INTRODUCTION ................................................................................................................ |
4 |
ABOUT THE CONNECT MIXERS ...................................................................................... |
4 |
FEATURES ......................................................................................................................... |
5 |
USB INTERFACE ............................................................................................................... |
6 |
FX INTERFACE .................................................................................................................. |
6 |
WALKTHOUGH—CONNECT 502USB .............................................................................. |
7 |
WALKTHOUGH—CONNECT 802USB .............................................................................. |
8 |
WALKTHOUGH—CONNECT 1002FX/USB (also for 1202) .............................................. |
9 |
WALKTHROUGH—REAR PANEL ................................................................................... |
10 |
WIRING DIAGRAM ........................................................................................................... |
10 |
DIMENSIONAL DRAWING ............................................................................................... |
11 |
BLOCK DIAGRAM ............................................................................................................ |
13 |
SPECIFICATIONS ............................................................................................................ |
17 |
CONNECT SERIES
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1.Read these instructions.
2.Follow all instructions.
3.Keep these instructions.
4.Heed all warnings.
5.Do not use this apparatus near water.
6.Clean only with a dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer (such as the exclusive supply adapter, battery etc).
12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart and apparatus combination to avoid injury from tip-over.
13.Unplug the apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way including but not limited to power supply cord or plug damage, liquid ingress, foreign objects in the chassis, exposure to rain/moisture or impact damage. In addition the unit must be serviced when you experience any abnormal operation.
15.CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not attempt to perform any servicing other than that contained in the operating instructions unless you are qualified to do so. In addition opening the casing will result in your warranty becoming null and void.
16.Do not install this apparatus in a confined space such as a book case or similar unit. Good ventilation should be maintained around the apparatus and any vents, air-inlets or fans should not be obstructed by objects such as paper, table-cloths, curtains etc.
17.WARNING: To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing and objects filled with liquids, such as vases, should not be placed on the apparatus.
18.WARNING: The mains plug is used as a disconnect device, the disconnect device shall remain readily operable.
OPERATING MANUAL AND USER GUIDE
ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR |
19.This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
20.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
21.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use local return and collection systems or contact the retailer where the product was purchased. They can take this product for safe environmentally friendly recycling.
CONNECT SERIES
INTRODUCTION
Congratulations on the purchase of your CONNECT series mixer. CONNECT series mixers are the result of many years of experience in the use, design and manufacture of professional audio equipment. We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with your sound.
From the time Gilbert Briggs built his first loudspeaker in 1932, to the present day, Wharfedale have maintained the same standard of quality in components, workmanship and performance.
Please take the time to read this manual completely in order to ensure that you get the most from your CONNECT mixer.
ABOUT THE CONNECT MIXERS
The CONNECT mixers from Wharfedale Pro are high quality compact mixers that are suitable for a wide range of applications.
Professional big mixer features such as Phantom powered, balanced XLR microphone inputs give you full functionality and great sound in an ultra compact and cost effective package that is ideal for live sound, home studio recording and fixed installations. The Microphone pre-amplifiers use the same high quality components and construction methods that are employed in our flagship mixers.
All CONNECT mixers feature an intuitive, ergonomically designed user interface that is excellent for beginners and professionals alike. Comprehensive connectivity ensures that a CONNECT mixer will fit into any situation you need.
COMMON FEATURES
•High quality microphone preamplifiers, with switchable global +48V phantom power
•Balanced XLR Mic/Mono inputs with input gain control
•Stereo Channels with Balanced/Unbalanced ¼" TRS Inputs
•Pan/Balance controls for all channels
•Clip LED for all mono channels
•Separate Main Mix and Phones outputs with level controls
•Stereo 4 segment LED meters
•Stereo 1/4” Headphones outputs
•Full duplex 16 bit/48 kHz USB interface, with destination switches
OPERATING MANUAL AND USER GUIDE
CONNECT 502USB FEATURES
•1 Mono Mic/Line Channel and 2 Stereo Channels
•2 Band EQs for mono channel
CONNECT 802USB FEATURES
•2 Mono Mic/Line Channels and 2 Stereo Channels
•3 Band EQs for all channels
CONNECT 1002FX/USB FEATURES
•2 Mono Mic/Line Channels and 8 Stereo Line Channels
•3 Band EQs and switchable high pass filter for all mono channels
•Built-in 56 effects digital FX with LED display
•Control room, FX Send/AUX and Headphones outputs
CONNECT 1202FX/USB FEATURES
•4 Mono Mic/Line Channels and 8 Stereo Line Channels
•3 Band EQs and switchable high pass filter for all mono channels
•Built-in 56 effects digital FX with LED display
•Control room, FX Send/AUX and Headphones outputs
Loading...