Westinghouse WDG110 Quick Guide

Quick Start Guide

WDG110 series

Enjoy peace of mind. Register your appliance today.

Stay updated on better living services, safety notices and shop for accessories.

1. Open the camera app on your smartphone and point at the QR code to scan

Product Registration QR code is located on the front of your appliance or inside the door rim*.

WDG110 series

Dear Customer,

Thank you for purchasing a Westinghouse appliance. You have chosen a product that comes from a history of durable and reliable products loved by many families. We look to help you make the most of your time at home, so you can spend your time doing what you really love, with the ones you love.

Welcome to Westinghouse.

Ready

This is a Quick Start Guide. Please refer to user manual online for detailed information and installation

To access your detailed user manual online, simply scan the QR code on your smart phone.

For more detailed information and installation guide refer to user manuals at westinghouse.com.au/manuals

2. Tap the notiﬁcation or link to open the registration form

3. Complete your details and enjoy peace of mind

*Exact location of QR code may vary depending on oven model

Need more help?

To access your detailed user manual online, simply scan the QR code on your smart phone. If you prefer a printed manual, please contact our Customer Care Centre using details below.

Electrolux Home Products Australia

telephone: 13 13 49 email: customercare@electrolux.com.au

Customer Care Centre

web: electrolux.com.au

Electrolux Home Products New Zealand

telephone: 0800 436 245 email: customercare@electrolux.co.nz web: electrolux.co.nz

Before you start, please make sure:

Your cooker has been correctly installed by a qualiﬁed person.

Your cooker has power and is switched on.

You’ve removed all relevant packaging.

Set...

Get to know the control panel:

1 2

5 6

1 Burner control knob 2 Grill temperature control knob 3 60 minute timer

4 Oven temperature control knob 5 Grill piezo ignitor 6 Oven piezo ignitor

3 41

Most of the packaging materials can be recycled. Please dispose of them at your local recycling centre or in your own recycling bin.

Set...

Go!

Installing the accessories

Fitting the oven shelves

1. Ensure shelf orientation is correct (refer to diagram below).

2. Slide oven shelves onto oven supports (side runners) at an angle until raised back of shelf is past the stop on oven supports (side runners).

3. Lower front of shelf and push in until stop is reached.

4. To remove oven shelves, withdraw to the stop and raise the front of shelf to clear the stop.

Fitting the grill dish supports

Insert the ends of the supports into the holes and swing downwards.

Fitting the grill dish

Ensure rear of the dish is engaged with the side support before sliding backwards. To remove simply pull forwards and upwards.

You’re ready to use your new Westinghouse appliance. A few tips from us:

Remember to pre-heat each time.

For best cooking results pre-heat the oven. Pre-heating allows the oven to reach the required

temperature quickly and eciently as well as cook food at the correct temperature for the entire cook time. Recommended pre-heat time is 30 minutes for baking and 3 minutes for grilling.

Lighting gas hotplate, grill and oven

Hotplate Ignition – (Manual)

To light a burner, depress the corresponding knob fully and while continuing to depress the knob approximately 5 seconds, turn anti-clockwise to ‘HI’ position. At the same time, hold hand-ignitor next to the burner and ignite (hand-ignitors not supplied). The ﬂame sensor must warm up in order for the ﬂame to stay alight.

Grill Ignition – Piezo

Depress the grill control knob fully and while continuing to depress the knob for approximately 5 seconds, turn anti-clockwise to ‘HI’ position. The ﬂame sensor must warm up in order for the ﬂame to stay alight.

Oven Ignition – Piezo

With the left hand push and hold the Oven Control Knob in and turn it a quarter of the way anticlockwise. Keep the oven Control Knob pushed in ﬁrmly and at the same time push the Oven Piezo Ignitor button on the right hand side of the control panel (several times if necessary). It will make a loud ‘clack’ noise as the Piezo mechanism creates a spark. Hold control knob in for 15 seconds after ignition.

Note the orientation of the side and rear features

Condition the oven

(to burn o any residue)

New appliances can have oil or residue left from manufacturing. You will need to heat your oven for 30 minutes before using it for the ﬁrst time.

1. Using the oven control knob, set

the oven at 180°C for approximately 30 minutes. Later, run the grill on maximum for 15 minutes with the grill door open. Please ensure the room is well ventilated during this process.

Engagement of

rear of dish

Choose the right program for the best result:

In a convectional electric oven, heat comes from two elements, one above and

OVEN

GRILL

Refer to your full user manual for more details on oven functions.

Set your temperature

• To set the temperature, turn the grill/oven knob in an anti-clockwise direction to the desired setting.

• Once the food is cooked, turn the temperature selector back in a clockwise direction.

Set a Timer

• The 60 minute timer (where ﬁtted) sets a reminder time.

• When the timer returns to zero, the timer will give a short ring.

one below the food. The bottom element is hidden below the floor of the oven. The centre shelf is ideal for baking at precise temperatures.

When it comes to cooking tender cuts of meat, steak, chops, sausages, fish, cheese toasties and other quick cooking foods, the grill setting will give you the best results. Pre-heating your grill for 3 minutes will help in sealing in the natural juices of the food for better flavour. For separate grill models, grill with the grill door open.

NOTE: For any time below 15 minutes, turn knob past 15 minutes, then back to required time setting.

Westinghouse WDG110 Quick Guide

Specifications and Main Features

Frequently Asked Questions

User Manual