Western Digital WD Passport Pocket Drive Install Guide

WD Passport

™

POCKET DRIVE

Quick Install Guide

WD Passport POCKET DRIVE

Quick Install Guide

Important:

WD recommends installing the latest service packs and

updates. For Windows®, go to the Start menu and select
Windows Update. For Mac
select Software Update.

®

, go to the Apple menu and

For Windows 98SE, you must install the USB Mass

Storage driver on your system before connecting the
pocket drive. Visit support.wdc.com, click Knowledge
Base, and search for answer ID 1286.

Connecting the Drive

1 Slide out the connector 2 Rotate the connector if necessary 3 Connect to your computer

Disconnecting the Drive

Windows

Double-click the Safely Remove Hardware icon in your

system tray (typically in the bottom right corner of your
screen). Select USB Mass Storage Device and click Stop.
Click OK to confirm your selection. Now you can safely
disconnect the drive from your computer.

Macintosh

the desktop, and drag it to the Trash icon. After the disk
icon disappears, you can safely disconnect the drive from
your computer.

1

®

Locate the Removable Drive(s) icon for this device on