Weslo WLEVEX12921 Owner's Manual
Model No. WLEVEX12921
www.iconeurope.com
Visit our website at
Serial No.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
08457 089 009
USER'S MANUAL
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
EFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
B
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
C
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
IMPORTANT PRECAUTIONS
WARNING:
tions before using the exercise cycle.
1. Read all instructions in this manual before
using the exercise cycle. Use the exercise
cycle only as described in this manual.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.
3. Use the exercise cycle indoors on a level surface. Keep the exercise cycle away from
moisture and dust. Place a mat under the
exercise cycle to protect the floor.
4. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
5. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
6. Wear appropriate clothing when exercising;
do not wear loose clothing that could become
caught on the exercise cycle. Always wear
athletic shoes for foot protection.
To reduce the risk of serious injury, read the following important precau-
7. The exercise cycle should not be used by
persons weighing more than 115 kg (250 lbs.).
8. Always keep your back straight whilst using
the exercise cycle; do not arch your back.
9. If you feel pain or dizziness whilst exercising,
stop immediately and cool down.
10.The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
11.The exercise cycle is intended for home use
only. Do not use the exercise cycle in
a commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
2
BEFORE YOU BEGIN
ongratulations for selecting the new WESLO
C
PURSUIT 102 exercise cycle. Cycling is one of the
most effective exercises for increasing cardiovascular
fitness, building endurance, and toning the body. The
URSUIT 102 exercise cycle offers a selection of fea-
P
tures designed to let you enjoy this healthful exercise
in the convenience and privacy of your home.
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please call our Customer
Water Bottle Holder*
Pulse Sensor
®
ervice Department at 08457 089 009. To help us
S
assist you, please note the product model number and
serial number before calling. The model number is
WLEVEX12921. The serial number can be found on a
ecal attached to the exercise cycle (see the front
d
cover of this manual for the location of the decal).
Before reading further, please familiarise yourself with
the parts that are labeled in the drawing below.
Handlebar
Console
Seat
Adjustment Knob
REAR
Resistance Knob
FRONT
Adjustment Knob
Pedal/Strap
RIGHT SIDE
*No water bottle is included
3
ASSEMBLY
3/8” Nylon
Locknut (33)–4
M8 Nylon
Locknut (10)–3
M8 Flat
Washer (51)–3
M8 x 15mm Button
Screw (34)–3
3/8” x 65mm Carriage Bolt (30)–4
Curved
Washer (42)–3
Ground
Screw (27)–1
M5 x 12mm
Screw (49)–4
M8 Split
Washer (47)–3
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable spanner , Phillips screwdriver , and pliers .
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-attached.
1. Set the Front Stabiliser (2) in front of the Frame (1),
with the Wheels (23) on the side shown. Whilst another
person lifts the front of the Frame slightly, attach the
Front Stabiliser with two 3/8” x 65mm Carriage Bolts
(30) and two 3/8” Nylon Locknuts (33). Make sure that
the Front Stabiliser is turned so the Wheels are not
touching the floor.
2. Whilst another person lifts the rear of the Frame (1)
slightly, attach the Rear Stabiliser (6) with two 3/8” x
65mm Carriage Bolts (30) and two 3/8” Nylon Locknuts
(33).
1
30
23
2
33
1
2
23
1
33
33
6
30
4
3. Whilst another person holds the Upright (13) in the
position shown, connect the Upper Wire (36) to the
Reed Switch Wire (43). Cut and remove the zip tie
olding the Reed Switch Wire to the Frame (1).
h
ext, connect the Resistance Cable (19) to the Lower
N
Cable (45) in the following way:
• See drawing A. Pull up on the metal bracket, and
insert the tip of the Resistance Cable (19) into the
wire clip on the Lower Cable (45) as shown.
• See drawing B. Firmly pull the Resistance Cable
(19) and slide it into the metal bracket on the Lower
Cable (45) as shown.
3
Be careful to
avoid pinching
he wires and
t
cables whilst
inserting the
Upright.
13
Adjustment
Holes
• See drawing C. Using pliers, squeeze the prongs on
the upper end of the metal bracket together.
Carefully pull the excess Upper Wire (36) out of the
top of the Upright (13), push the excess Cable (19, 45)
down into the Frame (1), and insert the Upright into the
Frame. Be careful to avoid pinching the Wires and
Cables. Next, align one of the adjustment holes in the
Upright with the indicated hole in the Frame. Insert the
Adjustment Knob (9) into the Frame and the Upright,
and turn the Knob clockwise until it is tight. Make sure
that the Knob is inserted through one of the
adjustment holes in the Upright.
4. The Console (16) requires three 1.5V AA batteries;
alkaline batteries are recommended. Insert three batteries into the battery compartment. Make sure that
the batteries are oriented as shown by the markings inside the battery compartment.
A
Metal
Bracket
19
45
4
19
45
1
Batteries
36
43
Zip Tie
Hole
9
B
45
C
19
19
45
16
5
Loading...