Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer satisfaction. If you have
questions, or if parts are damaged
or missing, PLEASE DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: You must note the
product model number and serial number (see the drawing
above) before contacting us:
USERʼS MANUAL
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri., 6 a.m.–6 p.m. MT
Sat. 8 a.m–4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
This drawing shows the location(s) of
the warning decal(s). If a decal is
missing or illegible, call the telephone number on the front cover of
this manual and request a free
replacement decal. Apply the decal
in the location shown. Note: The
decal(s) may not be shown at actual
size.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise cycle before using your exercise
cycle. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.
3. Your exercise cycle is intended for home use
only. Do not use your exercise cycle in a
commercial, rental, or institutional setting.
4. Keep your exercise cycle indoors, away from
moisture and dust. Place your exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around your exercise cycle to mount, dismount, and use it.
5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from your exercise cycle at all times.
8. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
9. Wear appropriate exercise clothes while
exercising; do not wear loose clothes that
could become caught on your exercise
cycle. Always wear athletic shoes for foot
protection while exercising.
10. Keep your back straight while using your
exercise cycle; do not arch your back.
11. When you stop exercising, allow the pedals
to slowly come to a stop.
12. If you feel pain or dizziness while exercising,
stop immediately and cool down.
13. Use your exercise cycle only as described in
this manual.
7. Your exercise cycle should not be used by
persons weighing more than 250 lbs.
(113 kg).
3
BEFORE YOU BEGIN
hank you for selecting the new WESLO PRO
T
exercise cycle. Cycling is one of the most effective
exercises for increasing cardiovascular fitness, building endurance, and toning the body. The 10.8X exer-
ise cycle offers a selection of features designed to let
c
you enjoy this healthful exercise in the convenience
and privacy of your home.
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
Fan
Console
®
0.8X
1
odel number and serial number before contacting
m
us. The model number and the location of the serial
number decal are shown on the front cover of this
manual.
To avoid a registration fee for any service needed
under warranty, you must register the exercise
cycle at www.wesloservice.com/registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Pulse Sensor
Wheel
Pedal/Strap
Seat
Adjustment Knob
Handlebar
4
ASSEMBLY
M10 Locknut
(63)–4
M8 Locknut
(60)–4
M8 Split
Washer (59)–5
M6 Washer
(55)–8
M8 x 25mm Button
Screw (33)–3
M8 x 70mm Button
Bolt (54)–2
M6 Locknut
(72)–4
M10 x 75mm Carriage Bolt (51)–4
M6 x 42mm Button
Screw (49)–4
M6 x 38mm Patch
Screw (48)–4
M6 x 38mm Button
Bolt (69)–4
M4 x 16mm
Screw (52)–4
o hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
T
ssembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
A
ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
tools, assembly requires a Phillips screwdriverand an adjustable wrench.
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
5
1.
To make assembly easier, read the information
on page 5 before you begin assembling the
xercise cycle.
e
While another person lifts the front of the Frame (1),
ttach the Front Stabilizer (3) to the Frame with two
a
M10 x 75mm Carriage Bolts (51) and two M10
Locknuts (63).
1
3
51
1
63
2. Slide the Rear Frame (2) out of the Frame (1), and
then tighten the Adjustment Knob (17) into the
Frame.
3. Attach the Wheels (18) to the Rear Stabilizer (4)
with two M8 Locknuts (60). Press a Wheel Cap (19)
onto each Wheel.
Attach the Rear Stabilizer (4) to the Rear Frame (2)
with two M10 x 75mm Carriage Bolts (51) and two
M10 Locknuts (63).
2
17
1
2
3
18
4
51
19
63
2
63
60
18
6
4. Attach the Seat Frame (7) to the Handlebar (6) with
wo M8 x 70mm Button Bolts (54), two M8 Split
t
Washers (59), and two M8 Locknuts (60). Do not
tighten the Button Bolts yet.
4
4
5
9
5
59
7
6
60
5. Attach the Backrest (5) to the Seat Frame (7) with
four M6 x 38mm Patch Screws (48) and four M6
Washers (55). Do not tighten the Patch Screws
yet.
5
5
7
55
48
55
48
7
6. Have another person hold the Seat Frame (7) under
he Rear Frame (2) as shown. Attach the Seat
t
Frame and the Seat (12) to the Rear Frame with
four M6 x 42mm Button Screws (49) and four M6
Washers (55).
See step 4. Tighten the two M8 x 70mm Button
Bolts (54).
6
12
See step 5. Tighten the four M6 x 38mm Patch
Screws (48).
7. The Console (16) can use four 1.5V “D” batteries
(not included); alkaline batteries are recommended.
IMPORTANT: If the Console has been exposed
to cold temperatures, allow it to warm to room
temperature before inserting batteries.
Otherwise, you may damage the console displays or other electronic components. Remove
the battery cover, insert the batteries into the battery compartment, and reattach the battery cover.
Make sure to orient the batteries as shown by
the diagram inside the battery compartment.
2
55
7
55
49
55
49
7
Battery Door
Batteries
To purchase an optional AC adapter, contact the
store where you purchased this product or call
the telephone number on the cover of this manual. To avoid damaging the console, use only a
manufacturer-supplied AC adapter. Plug one end
of the AC adapter into the jack on the console; plug
the other end into an outlet installed in accordance
with all local codes and ordinances.
16
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.