Weslo 831.294620 User Manual
Model No. 831.294620
Serial No.
Write the serial number in the
space above for future reference.
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
SEARS, ROEBUCK AND CO.
HOFFMAN ESTATES, IL 60179
USER'S MANUAL
Serial
Number
Decal
®
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
FULL 90-DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should not be used by persons
weighing more than 250 pounds.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose
clothing that could become caught in the
treadmill. Athletic support clothes are recom-
mended for both men and women. Always
wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.
10. When connecting the power cord (see HOW
TO PLUG IN THE POWER CORD on page 7),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit.
11. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor,
see your local SEARS or call 1-800-366-7278
and order part number 146148.
12. Keep the power cord and the surge suppressor away from heated surfaces.
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the treadmill is not working properly.)
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read
the following important precautions and information before operating the treadmill.
14. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
16. Never leave the treadmill unattended while it
is running. Always remove the key and unplug
the power cord when the treadmil l is n ot in
use.
17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 10.) You must be
able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
18. Do not change the incline of the treadmill by
placing objects under the treadmill.
19. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
20. Inspect and tighten all parts of the treadmill
regularly.
21. Never drop or insert any object into any
opening.
22.
DANGER:Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.
23. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.
3
WARNING:Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. SEARS assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
Note: The decal is shown at 38% of actual size.
The decal shown below has been placed on your treadmill. If
the decal is missing, or if it is not legible, please call our tollfree HELPLINE to order a free replacement decal (see the
front cover of this manual). Apply the decal in the location
shown.
4
BEFORE YOU BEGIN
Congratulations for selecting the new CADENCE®TS
310 treadmill. The TS 310 treadmill combines
advanced technology with innovative design to help
you get the most from your exercise in the convenience and privacy of your home. And when you’re not
exercising, the unique TS 310 can be folded up, requiring less than half the floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our toll-free HELPLINE at 1-800-736-6879,
Monday through Saturday, 7 a.m. until 7 p.m. Central
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number of the treadmill is 831.294620. The serial number can be found on
a decal attached to the treadmill (see the front cover of
this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Handrails
Console
Storage Latch
Speed Control
Key/Clip
Circuit Breaker
Walking Belt
Foot Rails
Incline Leg
Incline Pin
Power Cord
FRONT
BACK
RIGHT SIDE
Rear Roller
Adjustment Bolts
Water Bottle Holder
(Bottle not included)
Accessory Tray
Uprights
2. Attach the Storage Latch (48) to the left Upright (46) with
two Screws (2). Be careful not to overtighten the
Screws.
5
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small
parts used in assembly. Assembly requires your own phillips screwdriver , two adjustable
wrenches , and wire cutters .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply
wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
Uprights (46) to the position shown. Note that the
Console Base (52) and the Right Handrail (59) are
joined to the right Upright with the Wire Harness (60); be
careful not to pull on the Wire Harness. Set the Right
Handrail on the right Upright until step 3 is completed.
Refer to the inset drawing. Position one of the Base
Legs (62) against the base of the right Upright (46) as
shown. Make sure that the Base Leg Pads (63) and the
Front Wheel (68) are in the indicated positions. Attach
the Base Leg with two 3/8” x 2” Bolts (65), two 3/8”
Washers (66), and two 3/8” Nuts (61). It may be helpful
to tip the treadmill as you insert the Bolts.
Attach the other Base Leg (62) in the same way.
1
61
62
68
66
65
63
46
60
46
59
52
61
48
2
46
2
3/8” Nut (61)–4
Handrail Washer (43)–4
1/4” x 1” Bolt (42)–4
3/8" Washer (66)–4
Screw (2)–2
3/8” x 2" Bolt (65)–4
1 1/4” Screw (11)–4
6
3. Cut the plastic tie holding the cage nut in the upper end of
the Left Handrail (45).
Position the Left Handrail (45) on the left Upright (46).
Thread a 1/4” x 1” Bolt (42) with a Handrail Washer (43)
two complete turns into the upper end of the left Upright
and the Left Handrail. Do not tighten the Bolt yet.
Thread a 1/4” x 1” Bolt (42) with a Handrail Washer (43)
two complete turns into the lower end of the Left Handrail
(45) and the left Upright (46). Do not tighten the Bolt yet.
3
42
43
46
45
43
42
4. With the help of a second person, lift the Right Handrail
(59) and hold the right Handrail and the Console Base
(52) near the right Upright (46) as shown. Feed all of the
excess Wire Harness (60) into the Right Handrail, through
the indicated bracket, and down into the right Upright;
bend the Wire Harness, if necessary.
Cut the indicated plastic tie off the right Handrail (59).
Make sure that the Wire Harness (60) is in the bracket
and insert the bracket into the right Upright (46). Make
sure that the Wire Harness is not pinched.
60
Plastic Tie
Bracket
59
46
4
52
5. Thread a 1/4” x 1” Bolt (42) with a Handrail Washer (43)
two complete turns into the upper end of the right Upright
(46) and the Right Handrail (59). Do not tighten the Bolt
yet.
Thread a 1/4” x 1” Bolt (42) with a Handrail Washer (43)
two complete turns into the lower end of the Right Handrail
(59) and the right Upright (46). Do not tighten the Bolt
yet.
43
42
42
43
46
59
6. Set the Console Base (52) on the Left and Right Handrails
(45, 59). Make sure that the Wire Harness (60) is out of
the way as you thread four 1 1/4” Screws (11) into the
Handrails and the Console Base.
Tighten all parts used in steps 3 and 5. Then, tighten
the 1 1/4” Screws (11) used in this step.
7. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet, place a mat under the treadmill.
11
60
52
11
45
46
59
6
5
Loading...