Weslo 831.291030 User Manual
Model No. 831.291030
Serial No.
TREADMILL EXERCISER
Serial Number Decal
• Assembly
• Operation
• Maintenance
• Part List and Drawing
User’s Manual
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TREADMILL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
IMPORTANT PRECAUTIONS
WARNING:
tions before using the treadmill.
1. It is the responsibility of the owner to ensure
that all users of the treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. This treadmill is intended for in-home use
only. Do not use the treadmill in a commercial, rental, or institutional setting.
4. Place the treadmill on a level surface, with
eight feet of clearance behind it. Place a mat
under the treadmill to protect the floor.
5. Inspect and properly tighten all parts of the
treadmill regularly; replace any worn parts
immediately.
6. The roller guards must be 1/8 inch from the
rear roller (see the drawing on page 3). Adjust
the roller guards, if necessary.
7. Keep children under the age of 12 and pets
away from the treadmill at all times.
To reduce the risk of serious injury, read the following important precau-
10.Always wear athletic shoes when using the
treadmill; do not use the treadmill with bare
feet, wearing only stockings, or in sandals.
11.Do not use the treadmill if it is not working
properly.
12.Do not place hands or feet under the treadmill
while it is in use.
13.Always hold the handrail when mounting,
dismounting, or exercising on the treadmill.
14.If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
15.The decal shown below has been placed on
the treadmill in the location shown on page 3.
If the decal is missing or illegible, call toll-free
1-800-999-3756 and order a free replacement
decal. Apply the decal in the location shown.
8. The treadmill should not be used by persons
weighing over 250 pounds. Never allow more
than one person on the treadmill at a time.
9. Wear appropriate clothing when exercising.
Do not wear loose clothing that could become
caught on the treadmill.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using this product. Sears assumes no responsibility for personal injury
or property damage sustained by or through the use of this product.
2
BEFORE YOU BEGIN
Thank you for selecting the new WESLO®SMOOTHSTRIDER treadmill. The SMOOTHSTRIDER treadmill
is designed to let you enjoy effective cardiovascular
workouts in the comfort and convenience of your
home. And when the SMOOTHSTRIDER treadmill is
not in use, it can be folded up, requiring less than half
the space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, call 1-800-4-MY-HOME
4663).To help us assist you, please note the product
model number and serial number before calling. The
model number of the treadmill is 831.291030. The serial number can be found on a decal attached to the
treadmill (see the front cover of this manual for the
location).
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
®
(1-800-469-
Console
Warning Decal
Handrail
Walking Belt
Roller Guards
Rear Roller Adjustment Bolts
Pin
Hood
Pin
3
ASSEMBLY
The help of a second person is recommended. Set the treadmill in a cleared area and remove all packing
materials. Do not dispose of the packing materials until assembly is completed. Assembly requires only the
included allen wrench and wrench .
1. Identify the Right Upright (36), which has a single hole in
the indicated location. Hold the Right Upright against the
Base (14) as shown, and orient the Right Upright so the
two indicated holes are on the side shown.
Attach the Right Upright (36) to the Base (14) with two
M8 x 50mm Bolts (38), two M8 Curved Washers (37),
and two M8 Nylon Nuts (13) as shown.
Attach the Left Upright (35) to the Base (14) in the same
way. Make sure that the Left Upright is oriented so the
two indicated holes are on the side shown.
2. Raise the Left Upright (35) and the Right Upright (36) to
the position shown. Feed the Reed Switch Wire (6) into
the top of the Left Upright and out of the indicated hole.
1
2
38
37
35
37
13
38
36
6
Holes
Hole
14
Holes
35
37
13
37
36
3. Attach the Hood (28) to the front of the Frame (29) with
two M5 x 10mm Bolts (10).
4. See drawing 4a. Hold the front of the Frame (29)
between the Left Upright (35) and the Right Upright (not
shown). Align the holes near the front of the Frame with
one of the three sets of adjustment holes in the Uprights.
Insert a Pin (4) into each Upright and each side of the
Frame.
the same height.
Look under the Frame (29) near the Left Upright (35).
See drawing 4b. Locate the Clip (11) attached to the
underside of the Frame. Insert the Reed Switch (6) into
the Clip as shown. Next, locate the Magnet (12) on the
left Flywheel (9). Turn the Flywheel until the Magnet is
aligned with the Reed Switch.
so that there is a 1/8” gap between the Reed Switch
and the Magnet.
(3) in the Clip.
Make sure that the Pins are fully inserted at
Move the Reed Switch
Then, tighten the M4 x 12mm Screw
3
4a
29
4
10
35
Hole
28
4b
12
View from
6
1/8”
below
29
10
9
3
11
29
4
Loading...