Weller WXSB 200 User guide

WXSB 200 3-7

WXSB 200

Operating Instructions

DE EN FR IT ES PT NL SV DK FI GR TR CZ PL HU SK SL EE LV LT

4-7 WXSB 200

Table of Contents

1 About these instructions ............................................................ 4

2 For your safety ........................................................................... 4

3 Included in delivery .................................................................... 5

4 Device description ..................................................................... 5

5 Commissioning the device ......................................................... 6

6 Equipotential bonding ................................................................ 6

7 Disposal ..................................................................................... 6

8 Warranty .................................................................................... 6

1 About these instructions

Thank you for the confidence you have shown in buying the Weller
WXSB 200 Solder Bath. The device has been manufactured in
accordance with the most rigorous quality standards which ensure
that it operates perfectly.

These instructions contain important information which will help you
to start up, operate and service the WXSB 200 Solder Bath safely
and correctly as well as to eliminate simple faults or malfunctions
yourself.

Z Please read these Operating Instructions and the attached safety

guidelines carefully prior to initial operation of the WXSB 200
Solder Bath.

Z Keep these instructions in a safe place and so that they are

easily accessible to all users.

1.1 Directives taken into consideration

The Weller WXSB 200 Solder Bath conforms to the specifications of
the EC Declaration of Conformity as defined by Directives
2004/108/EC, 2006/95/EC and 2011/65/EU (RoHS).

1.2 Applicable documents

− Operating Instructions for your supply unit

− Operating Instructions for WXSB 200

2 For your safety

− The WXSB 200 Solder Bath has been manufactured in
accordance with the current state of the art and recognised safety
rules and regulations. There is nevertheless a risk of personal
injury and damage to property if the safety information set out in
the accompanying safety booklet and the warnings presented in
these instructions are not observed.

− Always pass on the WXSB 200 Solder Bath to third parties
together with these Operating Instructions.

− The manufacturer accepts no liability for improper use of the tool
or for unauthorised modifications.

5-7 WXSB 200

2.1 Please observe the following guidelines:

General

information

− Do not put the Solder Bath into operation unless it is in perfect

working order.
Keep flammable objects well clear of the solder bath.

−

− Do not work on electrically live parts.

− The solder bath remains hot for some time after it is switched off.

− Avoid unintentional/accidental operation. Never leave the hot

solder bath unattended.

− Hot liquid soldering tin and solder spatter can cause burns. Wear
appropriate protective clothing to protect yourself against burns.

− Protect your eyes. Wear protective goggles.

Please note that when using lead based solder, lead emissions

−

are measurable at temperatures above 500°C.

− Read and follow the Operating Instructions for the Weller WX,
WXA, WXD supply unit in use.

2.2 Intended use

Use the WXSB 200 Solder Bath only for the purpose stated in the
Operating Instructions and under the conditions described in this
document. Intended use of the WXSB 200 Solder Bath also includes
the requirement that you

− adhere to these instructions,

− observe all other accompanying documents,

− comply with national accident prevention guidelines applicable at

the place of use.

The manufacturer accepts no liability for any damage resulting from
failure to use the device in compliance with these operating
instructions or unauthorised modifications to the device.

EN

3 Included in delivery

− T0052704399 WXSB 200 Soldering Bath

− Operating Instructions

4 Device description

4.1 WXSB 200 Solder Bath

The WXSB 200 Solder Bath has been designed for industrial
manufacturing applications. The solder bath is suitable for
connecting to all WX supply units rated for 200 W. The temperature

of the solder bath can be adjusted infinitely variably from 100°C to
500°C using the connected supply unit. The solder bath is
connected to the power supply (24 V safety extra-low voltage) by a
heat resistant silicone cable.

6-7 WXSB 200

4.2 Technical data

Temperature range: 100°C - 500°C (212°F - 932°F)
Tool cable: Silicone rubber, heat resistant
Heating output: 200 W
Voltage (heater): 24 V
Heating-up time: approx. 11 min (100°C to 350°C)

Connection: 12 pin connector, polarity protected with

Dimensions:
Soldering bath

(212°F to 662°F)

lock
L x W x H (mm) 150 x 120 x 65
L x W x H (mm) 58 x 30 x 19

5 Commissioning the device

WARNING!

Risk of burns

The soldering tips of soldering irons become very hot during
soldering and desoldering processes.

There is a risk of burns from touching the tips.
Z Do not touch the hot soldering tips and keep them away from

inflammable objects.

1. Make sure that there are no flammable or heat sensitive objects
in the vicinity of the solder bath.

2. Insert the connecting plug into the socket on the power supply
unit and lock the plug into the socket by turning it clockwise.

3. Turn on the supply unit.

4. Set the desired temperature at the supply unit (100°C - 500°C).
You can begin soldering work after the required heating-up time
has expired.

6 Equipotential bonding

The solder bath is connected to the supply unit by an equipotential
bonding conductor. There are various possibilities for potential
equalisation. The procedure for potential equalisation is described in
the Operating Instructions for the supply unit in use.

7 Disposal

Dispose of replaced equipment parts, filters or old devices in
accordance with the rules and regulations applicable in your country.

8 Warranty

Claims by the buyer for physical defects are time-barred after a
period of one year from delivery to the buyer. This does not apply to
claims by the buyer for indemnification in accordance with §§ 478,
479 BGB (German Federal Law Gazette).

We shall only be liable for claims arising from a warranty furnished
by us if the quality or durability warranty has been furnished by use
in writing and using the term "Warranty“.

7-7 WXSB 200

In addition, for the USA and Canada:
Weller Tools warrants to the original purchaser and any subsequent

owner (“Buyer”) that Weller soldering and desoldering products will
be free from defects in material and workmanship for a period of one
year from date of purchase, provided that no warranty is made with
respect to products which have been altered, subjected to abuse or
improperly used, installed or repaired. Use of non-Weller Tools
components will void this warranty if a non-Weller Tools component
is defective (or is the source of the defect). Weller Tools will repair or
replace products found to be defective not caused by a part,
component or accessory manufactured by another company, during
the warranty period. Contact Weller Tools with dated proof of
purchase and return to Apex Tool Group, LLC, 14600 York Rd. Suit
A, Sparks, MD 21152. All costs of transportation and reinstallation
shall be borne by the Buyer.

IN NO EVENT SHALL WELLER TOOLS BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. WELLER TOOLS
LIABILITY FOR ANY CLAIMS ARISING OUT OF THIS WARRANTY
SHALL NOT EXCEED THE PURCHASE PRICE OF THE
PRODUCT.

THE PERIOD OF ALL IMPLIED WARRANTIES APPLICABLE TO
THIS PRODUCT INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS, OR FITNESS FOR A
PARTICULAR PURPOSE IS LIMITED TO 12 MONTHS FROM THE
DATE OF PURCHASE BY THE USER.

Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may
not apply to you. Some states do not allow limitation on how long an
implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.

Subject to technical alterations and amendments!

Updated operating instructions are available for download at
www.weller-tools.com.

EN

GERMANY

A

Weller Tools GmbH
Carl-Benz-Str. 2
74354 Besigheim
Phone: [phone]
Fax: [phone]

GREAT BRITAIN

Apex Tool Group
(UK Operations) Ltd
4th Floor Pennine House
Washington, Tyne & Wear
NE37 1LY

FRANCE
Apex Tool Group S.N.C.
25 Av. Maurice Chevalier BP 46
77832 Ozoir-la-Ferrière Cedex
Phone: [phone]

Fax: [phone]
Phone: [phone]
Fax: [phone]

ITALY
Apex Tool S.r.I.
Viale Europa 80
20090 Cusago (MI)
Phone: [phone]
Fax: [phone]

SWITZERLAND

Apex Tool Sàrl
Rue de la Roselière 12
1400 Yverdon-les-Bains
Phone: [phone]

Fax: [phone]

USTRALIA
Apex Tools - Australia
P.O. Box 366
519 Nurigong Street
Albury, N. S. W. 2640
Phone: [phone]
Fax: [phone]

CANADA

Apex Tools - Canada
5925 McLaughlin Rd.
Mississauga
L5R 1B8, Ontario
Phone: [phone]
Fax: [phone]

CHINA
Apex Tool Group
A-8 Building, No. 38 Dongsheng Road
Heqing Industrial Park, Pudong, PRC
201201 Shanghai
Phone: [phone]
Fax: [phone]

USA
Apex Tool Group, LLC
14600 York Rd. Suite A
Sparks, MD 21152
Phone: [phone]
Fax: [phone]

www.weller-tools.com

Weller® is a registered Trademark and registered Design of Apex Tool Group, LLC
© 2013, Apex Tool Group, LLC

T005 57 236 01 / 08.2013
T005 57 236 00 / 02.2011