Change patient mode MAIN MENU, SETUP, MORE, CHANGE
Change ECG lead
Change RESP lead MAIN MENU, ECG/RESP, MORE,
(NEXT, CHANGE)
Specify auto or manual NIBP
MAIN MENU, ECG, ECG LEAD
MAIN MENU, NIBP, AUTO/MAN
Specify waveforms for display MAIN MENU, SETUP, WAVE SEL, (NEXT, ON/OFF)
Change HR/PR tone volume MAIN MENU, SETUP, MORE, (NEXT, CHANGE)
View vital sign trends
Change time/date MAIN MENU, SETUP, MORE, MORE,
(NEXT, UP or DOWN)
MAIN MENU, SETUP, TRENDS, (NXT TRND)
Alarms and Alerts
Silence alarm or alert tone for 90 sec
or until a new alarm or alert occurs or SILENCE
Inhibit alarm and alert tones for 4 min MAIN MENU, SETUP, ALARMS, 4 SUSPND
Re-enable a silenced alarm or alert tone or RESUME
Change alarm tone volume
Change alarm limits
MAIN MENU, SETUP, MORE, (NEXT, CHANGE)
MAIN MENU, SETUP, ALARMS, LIMITS
Propaq
Propaq® Encore
ALARMS
©2005 · Printed in USA · P/N: 810-0665-03 Rev. A 6/05
NIBP
NET OFF
ALARMS
NIBP
START/
STOP
NET OFF
FREEZE/
UNFREEZE
MAIN
MENU
START
STOP
SNAP
SHOT
PRINT
TRENDS
FREEZE/
UNFREEZE connected to Acuity)
MAIN MENU ■ Return to main menu
START/STOP
SNAP SHOT ■ Print previous eight seconds
PRINT TRENDS ■ Print specified trends
800 289 2500 · 503 530 750 0 · Beaverton, Oregon USA
®
Encore
■
■
equipment alert
■
■
■
Vital Signs Monitor
Vital Signs Monitor
Consult Directions for Use or Reference Guide
Silence/Re-enable a patient alarm or
Start/Stop an NIBP reading
Disconnect from Acuity System (if connected)
Freeze/Unfreeze displayed waveforms (if not
■ Start/Stop printing
Loading...