Welch Allyn Mounting Welch Allyn Wall Hanger User Manual
Instructions for Mounting Welch Allyn Wall HangerInstructions for Mounting Welch Allyn Wall Hanger
1. Select mounting location on wall. Wall must be hollow.
1. Select mounting location on wall. Wall must be hollow.
2. Mark the two mounting hole locations 3 " apart.
2. Mark the two mounting hole locations 3 " apart.
3. Drill " diameter holes in the marked locations.
3. Drill " diameter holes in the marked locations.
4. Remove toggles from bolts.
4. Remove toggles from bolts.
5. Place bolts through mounting holes. See Figure
5. Place bolts through mounting holes. See Figure
6. Reattach toggles to bolts.
6. Reattach toggles to bolts.
7. Press the toggles thruogh the " diameter holes
7. Press the toggles thruogh the " diameter holes
8. Tighten the bolts to secure hanger to the wall.
8. Tighten the bolts to secure hanger to the wall.
9. Place black plugs over each mounting hole.
9. Place black plugs over each mounting hole.
10. Place the Welch Allyn endoscope into the hanger
10. Place the Welch Allyn endoscope into the hanger
Part No. 650013
Part No. 650013
Printed in the USA
Printed in the USA
1/21/2
1/21/2
previously drilled in the wall.previously drilled in the wall.
as shown in Figure 2.as shown in Figure 2.
-3/16-3/16
1.1.
Figure 1Figure 1
Figure 2Figure 2
R
Medical Division
Medical Division
4341 Sate Street Road
4341 Sate Street Road
Skaneateles Falls, NY 13153-0220
Skaneateles Falls, NY 13153-0220
Telephone: (315) 685-4560
Telephone: (315) 685-4560
G650057A
G650057A
9/27/95
9/27/95
Loading...