Welch Allyn Connex ProView User Manual

Connex® ProView installation and user guide

80019229 Version: B

Page 1 of 7

Connex® ProView installation and

user guide

Connex® ProView installation and user guide

80019229 Version: B

Page 2 of 7

Contents

Intended use ................................................................................................................................................ 3

Setup ........................................................................................................................................................... 3

Create roles and users ................................................................................................................................ 3

Create the ProView role ........................................................................................................................... 3

Create the VitalTestApp role .................................................................................................................... 3

Create the ProView user .......................................................................................................................... 3

Create the VitalTestApp user ................................................................................................................... 4

Create the BioMed user ........................................................................................................................... 4

Using the program ....................................................................................................................................... 4

Log in to the program ............................................................................................................................... 4

Display the patient list .............................................................................................................................. 4

Search the patient list .............................................................................................................................. 5

Display the vitals test list .......................................................................................................................... 5

Using a vitals test to test EMR connectivity ................................................................................................. 6

Create a vitals test ................................................................................................................................... 6

Appendix ...................................................................................................................................................... 7

Update the server IP address .................................................................................................................. 7

Install the program ................................................................................................................................... 7

Uninstall the program ............................................................................................................................... 7

Connex® ProView installation and user guide

80019229 Version: B

Page 3 of 7

WARNING Patient data risk. Create the VitalTestApp role only in your network's test
environment. Do not create this role in an environment that interacts with actual patients.
Sending vitals tests to a live hospital network may interfere with current patient data.

Intended use

The Welch Allyn Connex® ProView program allows you to check on data actively being processed by the
Welch Allyn Connex® Central Station as well as troubleshoot issues where the data is not being properly
processed.
Users of the program are expected to have strong computer skills and will use the software as a means to help
diagnose workflow, networking, or configuration issues that might prevent patient data from reaching the
EMR. Typical users include Welch Allyn service team members and HL7 system administrators.

Setup

Create roles and users

Before using the program, roles and users must be created.

Create the ProView role

1. From the Connex CS Server desktop, launch the Connex CS Administrator Tools ( ).

2. Select the Role tab and click Create new role.

3. Enter ProView as the new role, select the AdminSystem privilege, and click Save.

A confirmation dialog appears indicating the role is saved.

4. Click OK.

Log back into the program to complete the changes.

Create the VitalTestApp role

1. If necessary, launch the Connex CS Administrator Tools program.

2. Select the Role tab and click Create new role.

3. Enter VitalTestApp as the new role, select the AdminSystem, CreatePatient, CreateTest, and

EditAnyPatient privileges, and click Save.
A confirmation dialog appears indicating the role is saved.

Click OK.
Log back into the program to complete the changes.Create the
ProView user

1. If necessary, launch the Connex CS Administrator Tools program.

2. Select the Users tab and click Add.

3. Enter the user information and select ProView in the User Roles section.

4. Click Save.

A confirmation dialog appears indicating that the role is saved.

5. Click OK.

Log back in to the program to complete the changes.