CARDIOPERFECT
WORKSTATION
INSTALLATION GUIDE
™
Windows Vista® - DO THIS FIRST
INSTALLING THE CARDIOPERFECT
WORKSTATION SOFTWARE ON A
SINGLE PC
For software version 1.6.1 or later
This guide shows how to install the software for the Welch Allyn
CardioPerfect Workstation on a single laptop or desktop PC. This guide
does not cover installation for networked CardioPerfect configurations, or
for EMR-connected computers. For a detailed installation procedure, see
CardioPerfect Workstation Software Installation Manual, located on the
CD under “Browse the manuals” folder.
This screen might not appear.
System Requirements
You need the following minimum recommended configuration to
work with the CardioPerfect resting ECG, ambulatory blood pressure,
or spirometry software modules.
Computer Tower or desktop PC preferred; laptop or
tablet. Some tablet computers may not
support data recording.
Operating System Windows Vista Business Edition
service pack 1 or later
CPU P4 (or equivalent) or higher
Hard disk 20 GB with 5 GB free space
RAM 512 MB, 1 GB or higher recommended
Monitor resolution 1024 x 768 true color,
1280 x 1024 recommended
Monitor size 15" or higher
Ports 2 USB
This screen might not appear.
1 Install the CardioPerfect software and USB drivers.
Close all running programs.
CardioPerfect CD.
For this installation you can ignore all but this first
menu item. If this screen does not appear, explore
the CD, and run installer ( ).
(next page)
CARDIOPERFECT
WORKSTATION
INSTALLATION GUIDE
™
Accept
The serial number and release
code are located on the inside
cover of the CD case. The
serial number consists of the
last 6 digits following the
string of zeros.
Wait while the database engine (MSDE) is installed.
It takes a few minutes.
Caution: Do not plug in any USB devices yet.
Select these three checkboxes. Check “US Default Settings.”
Do not cancel. You must install this USB driver even if you
did not purchase the spirometry option.
2
Finish
Finish
Caution: Do not plug in any USB devices yet.
Do not cancel. You must install this USB driver even if you
did not purchase the ECG recorder option.
CardioPerfect CD.
2 If you’ll be using a spirometer or ECG recorder,
set up the computer to keep power on.
Keeping power on ensures continuous communication
with your USB devices .
Finish
(next page)
3
3 Create a test patient card.
This icon will have
been automatically
created on your desktop.
Welch Allyn
CardioPerfect
Double-click to start
the CardioPerfect
application.
NEXT STEP: Install and verify all devices that you have purchased: ECG recorder, spirometer, and/or
ABPM 6100 recorder. When finished, please see the user information provided with your product.
4341 State Street Road, PO Box 220, Skaneateles Falls, NY 13153-0220 USA
(p) 800.535.6663 (f) 315.685.2174 www.welchallyn.com
© 2008 Welch Allyn Mat. Number: 711952, Ver: A
Fill in the fields with any data you like.
This test patient will remain in your system.
Patient cards can be edited but not deleted
except by a system administrator.
Close CardioPerfect.
4
Loading...