Weidmuller IE-SW5-ECO User Manual

Weidmüller t
IIEE--SSWW55--EECCOO 88880088223300000000
Information Leaflet
Industrial Ethernet 10/100 MBit/s ECO-Switch
Version 1.0
PWR
The technical documentation is supplied without any warranty of fitness. Weidmueller does not warrant for their accuracy. The documentation may contain technical and typo­graphical inaccuracies. Weidmueller reserves the right to change it without notice.
AAllll rriigghhttss rreesseerrvveedd..
Reproduction, copying or redistribution for commercial purpose of any Weidmueller
material or design elements is strictly prohibited.
Copyright © 2009 Weidmüller t
11 IInnssttrruuccttiioonnss
11..11 SSaaffttyy iinnssttrruuccttiioonnss
11..22 CCEE MMaarrkkiinngg
This product confirms to the required regulations of the European Union (EU). This product is marked with the CE marking.
11..33 CCllaassss II DDiivviissiioonn 22
2
WWaarrnniinngg
- Substitution of components may impair suitability for Class I Division 2. It occur Explosion Hazard. You make sure, the modules are open devices intended for in­stallation/dismounting in an ultimate enclosure suitable for the intended application.
- Do not disconnect equipment unless power has been switched off or the area is known to be Non-hazardous. It occur Explosion Hazard. Use only for the applica­tion in Class I Div 2 certain connections with this device. Follow the allowed envi­ronment temperature range by the installation.
This equipment is suitable for use in Class I Division 2, Groups A, B, C, and D or Non-Hazardous locations only.
WWaarrnniinngg
- Using this product beyond the specifications or disregard of using instructions and warnings can cause grave malfunctions so that personal injury and material damages occur. Use the product only in accordance with the requirements.
- In the case of malfunction or failure of the IE-SW5-ECO cannot be predicted the behaviour by other connected devices of an arrangement. It can occur personal in­jury and material damages. Make only settings, if you are informed exactly about all effects in the whole arrangement.
11..44 RReeccyycclliinngg iinn aaccccoorrddaannccee wwiitthh WWEEEEEE
22 TTeecchhnniiccaall ssppeecciiffiiccaattiioonn
The IE-SW5-ECO switching hub is designed for the Industrial Automation environment (IP20). Like all Ethernet switches from Weidmüller, it features non-blocking (full wire-speed) operation. It divides an Ethernet network into five collision domains – “bridging” data links to create larger network diameters than possible with repeating hubs.
Each port automatically negotiates its data rate to 10 Mbps or 100 Mbps – controlling data flow with the PAUSE function in full-duplex links or with the backpressure method in half-duplex links. Port assignments are learned by reading Ethernet frames and logging the source addresses to a table. Throughput is improved by restricting traffic to those ports party to a data exchange – while other data is simultaneously exchanged on other ports. Store-and-forward operation is implemented and broadcast, multicast, or unicast transmissions are re­ceived by all ports. The IE-SW5-ECO has five Auto-MDIX ports for attaching local devices. In addition to a power LED, each port has one LED showing link/activity/rate and one showing duplex status. The unit operates from a wide range of low-voltage AC or DC power.
The IE-SW5-ECO is provided with a writable label for easy identification of the remote device attached to each cable.
3
BB22BB ddiissppoossaall
Dear Weidmueller Customer, purchasing our product gives you the opportunity to return the device to Weidmueller at the end of its service life. The EU Directive 2002/ 96 EC (WEEE) regulates the return and recycling of waste electrical and electronics equipment. In the Business to Business sector (B2B), manufacturers of electrical equipment are obliged as of 13/08/05 to take back and recycle free of charge electrical equipment sold after that date. After that date, electrical equip­ment must not be disposed through the "normal waste disposal channels". Electri­cal equipment must then be disposed of and recycled separately. All devices that fall under the directive must feature this logo.
WWhhaatt wwee ccaann ddoo ffoorr yyoouu??
Weidmueller offers you the possibility of returning your old device to us at no extra charge. Weidmueller will then professionally recycle and dispose of your device in accordance with the actual laws.
WWhhaatt ddoo yyoouu hhaavvee ttoo ddoo??
Once your device has reached the end of its lifecycle, simply return it (in the carton) to the Weidmueller sales agent responsible for you. We will then take care of all recycling and waste disposal measures. You will incur no costs or suffer any inconvenience.
Loading...
+ 5 hidden pages