Weidmuller IE-SW-BL05-5TX, IE-SW-BL08T-8TX, IE-SW-BL08 Series, IE-SW-BL05 Series, IE-SW-BL08-8TX Hardware Installation Manual
...
Unmanaged Fast Ethernet Switch
BasicLine
IE-SW-BL05 Series
(from product Rev. 2.0.2)
IE-SW-BL08 Series
(from product Rev. 2.0.0)
Hardware Installation Guide
Fifth Edition, June 2018
1243320000
/04/06.18
Important note:
This document and additional product information can be
downloaded using following link:
http://www.weidmueller.com
► Select Product Catalogue
Select „Active Industrial Ethernet “
Select „BasicLine unmanaged Switches “
Select Product model
Click and expand section „Downloads “
Download needed software or documentation
Copyright Notice
Copyright 2018 Weidmüller Interface GmbH & Co. KG
All rights reserved.
Reproduction without permission is prohibited.
- 2 -
Overview
The IE-SW-BL05/08 series of industrial Ethernet switches are entry-level
industrial 5 and 8-port Ethernet switches that support IEEE 802.3, IEEE
802.3u, and IEEE 802.3x with 10/100M, full/half-duplex, and MDI/MDIX
auto-sensing.
The IE-SW-BL05/08 series provides 12/24/48 VDC (9.6 to 60 VDC)
redundant power inputs. The switches are available with a standard
operating temperature range from -10 to 60°C, or with a wide operating
temperature range from -40 to 75°C, and IP30 metal housing makes
them rugged enough for any harsh industrial environment.
To provide greater versatility for use with applications from different
industries, the IE-SW-BL05/08 series also allow users to enable or
disable broadcast storm protection with DIP switches on the outer panel.
The IE-SW-BL05/08 switches can be easily installed with DIN-Rail
mounting as well as distribution boxes. The DIN-rail mounting capability
and IP30 metal housing with LED indicators make the plug-and-play
IE-SW-BL05/08 switches reliable and easy to use.
ATTENTION
This device complies with part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Package Checklist
Your Ethernet Switch is shipped with the following items. If any of these
items is missing or damaged, please contact your Weidmüller customer
service for assistance.
Ethernet Switch
Hardware Installation Guide (printed)
- 3 -
Panel Layout of
IE-SW-BL05(T)-5TX / IE-SW-BL08(T)-8TX
1. Grounding screw
2. Terminal block for power
input P1/P2
3. Heat dissipation orifices
4. DIP Switches
5. Power input PWR1 LED
6. Power input PWR2 LED
7. 10/100BaseT(X) Port
8. TP port’s 10/100 Mbps
LED
9. Article number
10. Screw hole for wall
mounting kit
11. DIN-Rail Kit
- 4 -
Panel Layout of
IE-SW-BL05(T)-4TX-1SC/1ST
NOTE:
The appearance of
IE-SW-BL05-4TX-1SC
is identical to
IE-SW-BL05-4TX-1SCS.
1. Grounding screw
2. Terminal block for power
input PWR1 / PWR2
3. Heat dissipation orifices
4. DIP Switches
5. Power input PWR1 LED
6. Power input PWR2 LED
7. 10/100BaseT(X) Port
8. TP port’s 10/100 Mbps
LED
9. Article number
10. 100BaseFX Port
11. FX port’s 100 Mbps LED
12. Screw hole for wall
mounting kit
13. DIN-Rail Kit
- 5 -
Panel Layout of
IE-SW-BL08(T)-7TX-1SC/1ST
NOTE:
The appearance of
IE-SW-BL08-7TX-1SC
is identical to
IE-SW-BL08-7TX-1SCS.
1. Grounding screw
2. Terminal block for
power input PWR1 /
PWR2
3. DIP Switches
4. Power input PWR1
LED
5. Power input PWR2
LED
6. 10/100BaseT(X)
Port
7. TP port’s 10/100
Mbps LED
8. Article number
9. 100BaseFX Port
10 FX port’s 100 Mbps
LED
11. Screw hole for wall
mounting kit
12. DIN-Rail Kit
Loading...