Weider 354156010, 15601 Owner’s Manual

15601 SINGLE STATION

MODEL NO.15601 SKU NO. 354.15601

SERIAL NO.

Write serial number in the space above for reference.

WArt, READ THIS FIRST!

ffyou find this unit to have missing or defective parts

please have ready the fol/owing information listed below before calling the 800 NUMBER,

The ASSEMBL Y MANUAL

MODEL NUMBER of this UNIT PART NAME or DESCRIPTION

ORDERING NUMBER

THE QUANTITY of each part that you need.

THE MODEL NUMBER of this unit can be found

In the UPPER LEFT-HAND or RiGHT-HAND CORNER of this page. The MOOEL NUMBER is 8 series of FOUR or FIVE NUMBERS, or a NUMBER preceeded by TWO

LETTERS.

HOME GYM

THE PART NAME or DESCRIPTION and the ORDERING NUMBER can be found on the PARTS US T PAGE.

0 WNER'S MANUAL

MADE .IN CANADA

WELDERiscommittedtoprovidingyou completecustomersatisfaction.If youhaveany questionsconcerning the assemblyof this productor finddamaged ormissingparts,we quaranteeyoudirectassistance. AVOID THE HASSLE OF CONTACTING

THE STORE FOR PARTS OR RETURNING THE PRODUCT. Call our "CUSTOMER ASSISTANCE UNE" for assistance

withpartsandinformationbycallingourtollfree number1-800-225-0653, Mon.- Fri.,8 am- 5 pmCST.

IMPORTANT: Read allsafety precautionsand instructionsin thismanualcarefully before usingthis equipment.Savethis manualforfuture reference.

1NN1258156010]

WELDER SPORTS INC.

21100 Erwin Street, Woodland Hills, CA. 91367USA F _" I )_"3_"_

PAGE 1 wEiDER SPORTING GOODS

TABLE OF _CONTENTS

Table of Contents ................................. 1

Important Safety Precautions ..................... 1

Introduction ....................................... 2

Assembly Steps ................................ 6-22

Maintenance Tips ................................... 2

Conditioning Guide ............................. 23

Parts List ....................................... 3-4

Ordering Parts ................................. 5

IMPORTANT SAFETY PRECAUTIONS _'

WARNING: +o reduce the risk of serious Injury, read the important safety precautions before using this

equipment.

1. Read all Instructions in this manual before using this equipment.

2. Use this equipment only as described tn this Owner's Guide.

3. Inspect and tighten all parts each time this equipment is used. Replace any worn parts Immediately.

4. Keep hands away from moving parts other than the designated handles.

5. Keep small children away from this equipment during use.

WARNING: Before beginning this or any exercise pro_lram consult your physician. This is especially

Important for individuals over the age of 35 or persons with pre-ex=sting health problems. Read all instructions before using. Welder assumes no responsibility for personal Injury or property damage sustained by or through the

use of this product.

+ ' SAVE THESE INSTRUCTIONS

PAGE 2 WELDER SPORTING GOODS

INTRODUCTION

Thank you f_r choosing the Welder POWER GYM. Your Home Gym is designed and engineered to give you many

hours of aerobic conditioning.

This manual is provided to help you understand the simple assembly, adjustments, and use of the Home Gym. In addition to assembly instructions it also contains, maintenance tips, and parts information.

Please take the time to read all the information contained in this manual and after assembly is completed keep it for

future reference.

TOP MAST

LAT BAR --

PRESS

BACK

5ACKREST

RIGHT SIDE

SEAT STACK

LEG EXTENSIOIN

LEFT SIDE

FRONT

MAINTENANCE TIPS

Keeping your POWER GYM In good condition will help Insure you many hours of safe, enjoyable exercise. Following an

easy maintenance routine will prevent premature wear and unnecessary parts replacement.

1. Check all fasteners, nuts and bolts, and caps to see that they are tight and fitted properly.

2. Lubricate all moving parts frequently to keep handles and other parts moving smoothly and eliminate squeaks and excessive noise.

3. Painted surfaces can be cleaned with a soft cloth an mild, non-abrasive detergent.

15601 PART LIST

DIAGRAM NO

43 50 51 52

62 63

PART NAME

BASE "T"

REAR BASE

REAR FRAME UPRIGHT

ARM PRESS FRAME UPRIGHT

SEAT FRAME

PULLEY PLATE

STEPPER BRACE

TOP FRAME

ARM PRESS BRACKET

SEAT BRACE

SEAT MOUNTING PLATE

WEIGHT PLATE 12.5 LB.

WEIGHT SELECTOR TUBE

GUIDE ROD

SEAT

BACKREST

LEG EXTENSION TUBE

PAD BAR 3/4" X 12 1/2"

PAD BAR 3/4" X 13 1/2"

FOAM ROLLER 3" X 5 3/4"

FOAM ROLLER 2 1/4" X 6"

ARM PRESS ASSEMBLY

ARM PRESS BUSHING

ARM PRESS CAP

IPEC-OECK ARM

U-BRACKET - 3 1/2" LONG

ARM PRESS HANDLES

PULLEY BRACKET

PULLEY TRAP BRACKET

FOAM ROLLER 3 1/4" X 7"

PLASTIC WEIGHT GUIDE BRACKET

U-BRACKET - 3" LONG

PEC-OECK CABLE 127" LONG

WEIGHT STACK CABLE 79" LONG

LEG EXTENSION CABLE 49" LONG

LAT BAR

PLASTIC GRIP - 1" 1,0. X 5" LONG

CABLE TRAP BRACKET

BENT PULLEY BRACKET

4 1/2" PULLEY

3 1/2" PULLEY

PULLEY CONNECTOR PLATE

5116=X 2 1/4" HE)( HEAD BOLT

5/16 = X 2 1/2 = HE)( HEAD BOLT

5/16 _ X 2 3/4" HEX HEAD BOLT

5/16" X 3" HEX HEAD BOLT

5/16" X 1" HEX HEAD BOLT

5/t6" X 1 1/2" HEX HEAD BOLT

QTY

1 1

1 1 4 4 2 4

6 2

ORDERING NO

C3211-F29*G04

C3212-F29*G04

C4109-F50*G04

C3214-F29*G04

C3215-F29*G04

C6775-F29*G04

C6776-F29*G04

C3216-F29*G04

C6777-F29*G04

C6778-F29*G04

C6779-F29*G04

BB-0325*G04

C6384-F29*G04

C6827-F29*G04

C t379-F29*G04

C1380-F29*G04

C3217-F29*G04

C6371-F20*G04

C6357-F03*G04

C0454-E04*G04

C0449-E08*G04

C3218-F29*G04

AA-8208*G04

C6783-F29*G04

C3219-F29*G04

C7725-F68*G04

C6385-F29*G04

C6781 -F29*G04

C6782-F29*G04

C0467-F23*G04

AA-8241*G04

C7727-F67*G04

C6637-F29*G04

C6638-F29*G04

C6639-F29*G04

C6831 -F32*G04

AA-8255"_;04

C6725-E28*G04

C6726-E28*G04

AA-8122*G04

AA-8133*G04

C6700-D23*G04

HH-5199*G04

HH-5053*G04

HH-5858*G04

HH-5167*G04

HH-5332*G04

HH-5312*G04

15601 PART LIST

DIAGRAM NO

• 86

105

106

110

112

114

115

120

121

122

123

PART NAME

5/16" x 2" HEX HEAD BOLT

5/16" x 3 1/4" HEX HEAD BOLT

5116" X 3/4" HEX HEAD BOLT

5116" FLAT WASHER

5116" NYLON LOCK NUT

3/8" X 2 112" HEX HEAD BOLT

3/8" X 1 3/4" HEX HEAD BOLT

3/8" X 2 3/4" HEX HEAD BOLT

3/8" FLAT WASHER

3/8" NYLON LOCK NUT

1/4" X 2 t/2" CARRIAGE BOLT

1/4" X 314" MACHINE SCREW

1/4" X 2 1/2" MACHINE SCREW

114" X 1 1/2_ HEX HEAD BOLT

114" X 1 3/4" HEX HEAD BOLT

1/4" X 2" CARRIAGE BOLT .

114" FLAT WASHER

I/4" NYLON LOCK NUT

#8 SHEET METAL SCREW

LATCH HOOK

1 118" X 2 1/2" PLASTIC BUSHING

112" X 112" ZINC BUSHING

SPACER 1/2"

1 1/2" SQUARE PLASTIC INSERT CAP

2" SQUARE PLASTIC COVER CAP

2" SQUARE PLASTIC INSERT CAP

1 1!4" SQUARE PLASTIC INSERT CAP

314" ROUND PLASTIC INSERT CAP

1" ROUND PLASTIC INSERT CAP

t" O.D. X 1" LONG BUSHING

3/8" LONG METAL SPACER

WEIGHT SELECTOR END TUBE CAP

1 3/16" X 2" LARGE WASHER

LARGE RUBBER WASHER

PEC-DECK LOCKING PINS

WEIGHT PLATE DECALS

STATION 1 DECAL

POWER STACK DECAL

ULTRA FORCE XT DECAL

ASSEMBLY MANUAL

TRAINING MANUAL

HARDWARE BAGS

STEPS 1 - $

STEP8 6-9

STEP8 t0 - t4

lSTEPS 15 - t7

PULLEYS

QTY

1 4

t 1

1 SET

1 t

1 1

ORDERING NO

HH-5054*G04

HH-5297*G04

HH-5245*G04

HH-5127*G04

HH-5012*G04

HH-5018*G04

HH-5308*G04

HH-5036*G04

HH-5265*G04

HH-5088*G04

HH-5333*G04

HH-5022*G04

HH-5044*G04

HH-5027*G04

HH-5024*G04

HH-5338*G04

HH-5048*G04

HH-5011*G04

HH-5449*G04

WW.7042*G04

AA-8210*G04

HH-5459*G04

HH.5346*G04

AA-8001*G04

AA-8015°G04

AA-8002°G04

AA-8069*G04

AA-8004*G04

AA-8005*G04

AA-8211*G04

HH-5428*G04

AA-8123*G04

HH-5460*G04

AA-8124*G04

WW-7013*G04

DE-4249*G04

CNN-t258*G04

CNN-t217*G04

C8794-G04*G04 C8795-G04*G04 C8796-G04*G04

C8797-G04*G04

C8798-G04*G04

PAGE 5 WFJDER SPORTING GOODS

ORDERING PARTS

Welder is dedicated to insure that each product is manufactured to the highest standards and that this product reaches the customer in the best possible condition. In the event that you find any problem in workmanship or

missing parts please call our toll free product service number: 1-800-225-0653. Weider provides replacement parts at no charge to the customer for one year if it is determined that the part was

defective from the manufacturer or if any part is missing from the original, un-opened carton.

If it becomes necessary to order replacement parts the following action and information is required:

1. Your Owner's LD. card must be returned to us to verify the

product you have purchased, your name, address, and the date of your purchase. No charge replacement parts will not be sent

without this information on file with our Parts Department.

2. Parts may be ordered using the parts order card which Is Included with this product or by calling our product service

number: 1-800-225-0653.

Before ordering parts by phone have ready the following

Information to expedite your order:

a. Name of the product (POWER GYM)

b. Model number of product (15601) c. Serial number of the product located on a decal on the frame

(See drawing on front cover for the location of this decal.)

d. Ordering number of part (,See Parts List page.) _

e. Description of the part from the Parts List page

f. Country of manufacturer (See cover.)

The same information is required when placing your order by mail. If you need parts or assistance do not return this product to the store, simply contact Weider Customer Assistance

at 1-800-225-0653 Monday - Friday 8 a.m. - 5 p.m. CST. All parts and service inquiries should be directed to:

Welder Sporting Goods

Parts Service Department 900 West St. John Street

Olney, Illinois 62450

STEP 1 BASE FRAME ASSEMBLY

PART NAME QTY 60 5116" X 2 114" HEX HEAD BOLT 4 62 5/16" X 2 3/4" HEX HEAD BOLT 2 70 5/16" FLAT WASHER 2 71 5/16" NYLON LOCK NUT 6 95 2" SQUARE PLASTIC COVER CAP 3

CAUTION: DO NOT TIGHTEN THE BOLTS

IN THE ASSEMBLIES OF STEPS 1,2,3, AND

4 UNLESS YOU ARE INSTRUCTED TO DO SO IN THAT ASSEMBLY BOX. YOU WILL

BE INSTRUCTED TO TIGHTEN THE BOLTS AFTER STEP 4 ASSEMBLIES ARE COMPLETED.

[] Begin by capping each tubing end of the REAR

BASE (2) with 2" SQUARE PLASTIC COVER CAPS !95).

[] Cap the end of the BASE "T" (1) with a 2"

SQUARE PLASTIC COVER CAP (95).

PAGE 6 WELDER SPORTING GOOOS '

[] Orient the Base "T" and the Rear Base so that

the dimpled-in holes are faced to the floor.

[]

Assemble the BASE "T" (1) to the REAR BASE (2) by bolting with 5116" X 2 114" HEX HEAD

BOLTS (60) up through the bottom of the Rear

Base, then through the Base "-r". Secure with

5/16" NYLON LOCK NUTS (71).

[]

To the BASE "T" (1), assemble the REAR FRAME UPRIGHT (3) so that the one slanted

bracket welded to the one end of the Upright is

to the top and slants downward from the front of

the unit to the rear. Attach with 5116" X 2 1/4" HEX HEAD BOLTS (60) by bolting up through

the bottom of the BASE "T" (1) and then

through the welded brackets on the UprighL Secure with 5116" NYLON LOCK NUTS (71).

[]

Assemble the PULLEY PLATE

(6) to the side of the BASE "T" (1) using 5116" X 2 314" HEX HEAD BOLTS (62) to bolt

through the Plate and then through the Base "T".

Assemble 5116" FLAT WASHERS (70) onto the Bolts

and secure with 5116" NYLON LOCK NUTS (71).

71 70

REAR

FRONT

PAGE 7 WELDER SPORTING GOODS

STEP 2 ARM PRESS & SEAT FRAME ASSEMBLY

PART NAME Q'W

60 5/16" X 2 1/4" HEX HEAD BOLT 2

61 5116" X 2 112" HEX HEAD BOLT 2 70 5116" FLAT WASHER 2 71 5116" NYLON LOCK NUT 4 93 1 1/2" SQUARE PLASTIC INSERT CAP 1

97 1 I14" SQUARE PLASTIC INSERT CAP 1

[]

To the front of the BASE "T"

(1) at the Cross-member tube, assemble the ARM PRESS

FRAME UPRIGHT (4). Using 5/16" X 2 1/4" HEX HEAD

BOLTS (60) bolt up through

the bottom of the Base "P' and than through the welded

brackets of the Upright.

Secure with 5116" NYLON

LOCK NUTS (71).

[]

With the welded leg curl

brackets of the SEAT FRAME (5) oriented up, attach the

Seat Frame to the ARM

PRESS FRAME UPRIGHT (4) with 5/16" X 2 1/2" HEX

HEAD BOLTS (61). Bolt

through the Seat Frame

brackets, and then through

the Arm Press Frame Upright.

Assemble 5116" FLAT WASHERS (70) onto the bolts

and secure with 5116" NYLON

LOCK NUTS (71).

[]

Cap the end of the SEAT

FRAME (5) with a 1 112" SQUARE PLASTIC INSERT

CAP (93).

[]

Cap the Welded Stopper Tube at the top of the ARM

PRESS FRAME UPRIGHT (4) with a 1 114" SQUARE

PLASTIC INSERT CAP (97).

+ 16 hidden pages