LED HD
COLOR MONITOR
0E-20LED
1
Contents
Contents ............................................................................................................. 1
Safety ................................................................................................................ 1
Cautions ............................................................................................................. 2
FCC RF Interference Statement .................................................................................. 3
Features ............................................................................................................. 4
Controls & Menu Operation ....................................................................................... 5
Mounting Guide ................................................................................................... 10
Accessories ........................................................................................................ 10
Power Indicator / Modes of Operation ........................................................................ 11
Care ................................................................................................................ 11
Dimensions ........................................................................................................ 12
Specifications ..................................................................................................... 12
Limited Warranty ................................................................................................ 14
Safety
1. To use the product safely, correctly and to keep users from suffering hurt or property loss,
please observe the following safety precautions when installing, using and maintaining.
2. Please read this handbook before operating the product and keep the handbook for future
reference.
3. Notice and observe all the warnings and illustration.
4. Do not adjust, maintain or modify if you don’t have corresponding qualifications.
5. Do not open or remove the rear cover, box or cover board of the product. Please contact the
dealer or after-sales service center when needing internal checking, adjustment and
maintaining.
6. Do not place article on the product. The product might be damaged if foreign matters enter
the internal unit.
7. Do not tread or squeeze the power line, especially the plug, outlet or the place where the
cable extends out of the product.
2
8. Do not put the product in flammable or corrosive gaseous environment, which might cause fire
or damage the product. Putting the product in flammable gas can easily cause a dangerous
explosion.
9. Please cut off power or remove the connecting line immediately if there is smoking, off-odor or
abnormal noise. Contact the after-sales service center after affirming there is no more smoking
or off-flavor. Without proper maintenance, fire can occur.
10. Only qualified servicemen can maintain. If the product gets any kind of damage, such as
damage to the plug, splash or foreign matter into the facility, exposed to rain or humidity, not
able to function or dropped, please fix it immediately.
11. Do not expose the product to the rain or chemicals. If the product is moist, please dry it before
turn on the power.
12. Turn off the power when cleaning the product.
13. Installment in an unsuitable location might cause failure of the product or other accidents.
Fasten the screw of every component when installing.
14. Do not touch the fixed component inside the product, otherwise it might cause damage to
people or to the facility.
15. Be careful when maintaining inner body even if the power is cut off. Some facilities are
equipped with UPS, and they can continue to supply power that is dangerous to people after
the power is cut off.
Cautions
CAUTION TO SERVICE PERSONNEL
POWER SUPPLY CORD IS USED AS MAIN POWER DISCONNECT DEVICE
IN THIS PRODUCT. UNPLUG THIS PRODUCT FROM THE WALL OUTLET
BEFORE REMOVING THE BACK COVER AND SERVICING.
1. Please put the product in flat, stable and dry location. Avoid direct sunlight, high temperature,
humidity, dust, and corrosive gases.
2. If the product is installed on the wall, please make sure the wall’s load bearing is enough. To
avoid falling and injury to persons, install according to the illustration.
3. The LCD might experience degraded performance when the temperature variation is big, which
will cause image distortion or decay of color. Wait for a moment (with power on) and the
normal performance will resume.
4. Do not block the ventilation opening. Install the product according to this handbook.
5. Do not install the product near any heat source such as radiator, heat register or stove.
3
6. Do not use unqualified connecting lines, which might cause equipment failure.
7. Do not press, stretch or heat the connecting line, which might cause damage to it.
8. Please firmly grasp the plug of the connecting line when inserting and drawing. Pulling the
connecting line emphatically might cause damage to it.
9. Cut off power and the connecting line immediately and contact the after-sales service center if
the product or the connecting line is damaged for some reason. Continuing using without
maintaining might cause smoking or off-odor.
10. Do not hang on the product, which might cause the product to fall or injure persons. Take
caution with children near the product.
11. Please cut off power for safety if not using the product for a prolonged period.
12. Do not let the connecting line get squeezed by the wall or buckle, pull or twine the connecting
line.
13. Make sure the power and the connecting line are cut off when moving the product.
14. Keep the product from collisions, which might cause equipment failure.
FCC RF Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
o Reorient or relocate the receiving antenna.
o Increase the space between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
o Only a shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the
grantee or manufacturer could void the user's authority to operate such equipment.
4
Doc Compliance Notice
This digital apparatus does not exceed the Class A limit for radio noise emissions from digital
apparatus set out in the radio interference regulation of Canadian Department of Communications.
CE Compliance
This monitor complies with the basic protection requirements of the
Electromagnetic Compatibility (EMC) Directive 2004/108/EC for electrical and
electronic equipment imported into the European Union (EU):
The electromagnetic disturbance generated by the apparatus does not exceed the
level specified in the harmonized EMC Standards for this type of apparatus. It has a level of
immunity to the electromagnetic disturbance to be expected in its intended use, and should
operate without unacceptable degradation of its specified performance.
Features
Ultrathin and lightweight.
High contrast ratio and high luminance. Greatly enhances layering and detail presentation.
Automatic elimination of ghosting, protecting the LCD panel for long-term use.
Rapid response, no trailing.
High reliability and excellent expansion capability.
Multilevel menu display function.
Internal power supply, low energy consumption, long service life.
Auto image adjustment function in VGA state.
High performance LCD panels utilizing a top ranking video processing chip that enhances the
display of high-definition images. Low power consumption, dust prevention, moisture protection
and shock resistance effectively lengthen the service life of the CCTV Display.
5
Controls & Menu Operation
Please connect the monitor to external devices according to the following I/O interface list, and
choose the corresponding incoming signal channel.
0E-20LED
Main Menu
Press the menu buttons on the bottom right side of the screen which allows the main menu to be
displayed on the screen. Depending upon the model, the submenus of the main menu: Picture
menu (VGA), Picture menu (HDMI), Audio menu, OSD menu, Function menu (HDMI) and Geometry
menu (VGA).
Press the menu button to choose the submenus. The menu chosen will show a wireframe, and press
Down/Up button to move among the secondary menus of the submenu.
A B C D E
6
A. “Source” button
Press the button to display all the signal channel menus.
When Main Menu is displayed, acts as confirmation key during the OSD operation.
Press the button to exit OSD menu.
B. “Down” button
Press the button to scroll the cursor to desired function.
Press the button to decrease the value of selected function in sub OSD menu.
Press the button to display aspect ratio and quickly change the aspect ratio.
C. “Up” button
Press the button to scrolling the cursor to desired function.
Press the button to increase the value of selected function in sub OSD menu.
Press the button to quickly display volume and change volume.
D. “Menu” button
Press the button to show the OSD main menu.
Press the button to exit OSD menu.
E. “Power” button
Press the button to turn ON or turn OFF the monitor.
0E-20LED
Picture menu (VGA)
Picture menu can set contrast, brightness, color temp and scale. Press Down/Up buttons to adjust, press menu
button to exit.
7
Picture menu (HDMI)
Picture menu can set contrast, brightness, hue, saturation, sharpness, color temp, scale, overscan and picture
mode. Press Down/Up buttons to adjust, press menu button to exit.
8
Audio menu
Audio menu can set bass, treble, balance. Press Down/Up buttons to adjust, press menu button to
exit.
OSD menu
OSD menu can set language, H-position, V-position, duration, halftone, USB UPGRADE, reset
defaults and version. Press Down/Up buttons to adjust, press menu button to exit.
9
Function menu (HDMI)
Function menu can set DLC. Press Down/Up buttons to adjust, press menu button to exit.
Geometry menu (VGA)
Geometry menu can set H-position, V-position, clock, phase and auto adjust. Press Down/Up
buttons to adjust, press menu button to exit.
10
Channel selection
Power Cable
HDMI Cable
VGA Cable
Audio Cable
“Source” menu can select the input channel. The options include VGA, HDMI, BNC, or S-VIDEO.
Press Down/Up buttons to adjust, press menu button to select input channel.
Mounting Guide
Wall or Other Mounting with VESA Standard
CAUTION The wall mount must bear a minimum of five times the
monitor’s net weight. To mount your MONITOR to the wall or
another surface, you need to purchase a VESA wall mount. Use four
M4 x 8mm screws (the base attachment screws removed in step 1
below are M4 x 8mm) to attach the mount. The monitor mount
VESA hole pattern is 75mm x 75mm
Note: Metric (M4 x 8 mm) is the type screw that should be used (do not use longer screws or the
monitor may be damaged).
1. Before mounting the monitor, remove the base riser (vertical portion of the base) by removing
the four screws near the top with a screwdriver. Then the base and the riser can be removed.
In order to prevent losing these screws, we suggest replacing the screws in their original holes.
2. Attach the VESA mount (75mm x 75mm) plate to the rear of the monitor and follow all of the
instructions provided with the mount to complete the mounting process.
Accessories
11
Power Indicator / Modes of Operation
LED Indicator
LED is off when power is off; LED glows green when power is on. The power management feature of
the monitor is designed for security surveillance applications. When there is no video, the monitor
remains ON to be instantly ready to display video when the source is changed or if a PC changes
state from sleep/standby to active mode. A floating “No Signal” box moves slowly across the
screen until video is restored.
Care
1. Please wipe dust and other particles with clean dustless cloth.
2. If it is still not clean, please use a neutral cleaner along with the clean soft towel. Wipe dry
after cleaning it.
3. Rubbing or scrapping the housing with fingernails or other hard objects might scratch the
housing.
12
Dimensions
Model
0E-20LED
Screen diagonal dimension
19.5
(inches)
Viewable area W x H (inches)
17.08*9.3mm
Led Type
LED
Pixel Pitch (mm)
0.2712
Screen Maximum Resolution
1600*900
Display Resolutions
720x400;640x480;
800x600;1024x768;
1280x1024;1600x900
Specifications
13
Supported Input Resolutions
720x400; 640x480; 800x600; 1024x768; 1280x1024; 1600*900;
1920x1080 (scaled)
Refresh Rate
60, 70, 75 Hz depending on resolution
Color Depth
16.7M
Brightness
250 CD/m2
Auto Adjust
Yes
Monitor Aspect Ratio
16 : 9
Display Aspect Ratio
OSD selectable 16:9 or 4:3
Horizontal TV Lines
720
Contrast Ratio
1000:1
Response Time (ms)
5
View Angle H/V (degrees)
170/160
Digital Video Inputs
HDMI up to 1920x1080
Analog Video In/Out
VGA up to 1920x1080
Audio inputs (stereo)
1x 3.5mm mini-jack
Speakers
Two – built in 2”
Stand-by
<0.5watts
Power Consumption
<25W
Monitor Body Dimensions
19.99 x 12.35 x 2.03
(W x L x D)
Max Dimensions Monitor +
Stand
19.99 x 14.97 x 6.44
(inches)
Panel Surface
Front bezel, high glossy; back cover, matte finish; base high glossy
Case & Stand Material
Plastic
VESA Mounting Pattern
75x75;
Base/Stand included
Yes
14
Base Tilt Angle
+15°~-10°
Weight Cabinet only (lb.)
6
Weight Cabinet + Base Stand
6.3
(lb.)
Power Supply (internal)
AC 100-240V～50/60Hz 1.1A
Operating Temperature
0ºC ～ 50ºC
Storage Temperature
-20ºC ～ 50ºC
Operating Humidity
10 ~ 90%
Accessories
VGA cable/Audio cable/User manual/Power cable
Certifications
CE/FCC/ROHS/HDMI
Warranty
30 months
Limited Warranty
1. Limited Warranty
a. General
Subject to the terms and conditions of this Limited Warranty, from the date of sale through the
period of time for product categories specified in Section 1(b), ADI warrants its W Box Technologies
products to be free from defects in materials and workmanship under normal use and service,
normal wear and tear excepted. Except as required by law, this Limited Warranty is only made to
Buyer and may not be transferred to any third party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
(i) The product is improperly installed, applied or maintained;
(ii) The product is installed outside of stated operating parameters, altered, or improperly
services or repaired;
15
(iii) Damage is caused by outside natural occurrences, such as lightning, power surges, fire,
Product Categories
Warranty Period
Soundbars
12 months
Walk Through Metal Detectors
12 months
Intrusion Wireless Communication Accessories
12 months
Analog Cameras
24 months
Hand Held Metal Detectors
24 months
Televisions
24 months
CCTV Power Supplies
24 months
In Ceiling Speakers
24 months
Amplifiers
24 months
Magnetic Locks
24 months
Request to Exit Devices
24 months
Surge Protection
24 months
UPS (uninterruptible power supplies)
24 months
Volume Controls
24 months
HDMI Distribution
24 months
6 Outlet Surge Protection
24 Months
Intrusion Audio Devices
30 months
Monitors
30 months
floods, acts of nature, or the like.
(iv) Defects resulting from unauthorized modification, misuse, vandalism, or other causes
unrelated to defective materials or workmanship, or failures related to batteries of any type used
in connection with the products sold hereunder.
ADI only warrants those products branded as W Box Technologies products and sold by ADI. Any
other products branded by third parties are warranted by the third party manufacturer for a period
as defined by the third party manufacturer, and ADI assigns to Buyer those warranties and only
those warranties extended by such third party manufacturers or vendors for non-ADI branded
products. ADI does not itself warrant any non-ADI branded product and sells only on an as is basis
in accordance with ADI’s terms and conditions of sale.
b. Specific Warranties for product categories are as follows:
16
Power and Relays
30 months
Hold-up Buttons
30 months
Video Baluns
30 months
HD Analog Cameras
36 Months
HD Video Recorders
36 Months
Smoke Detectors
36 months
DVR's, NVR's
60 Months
IP Cameras
60 Months
Racks
60 months
TV Mounts
60 months
PIR’s
60 months
Analog Cables
Limited Lifetime
B Connectors
Limited Lifetime
Bus Terminals
Limited Lifetime
Extension Cords
Limited Lifetime
HDMI Cables
Limited Lifetime
Jacks, Cords and Intrusion Communication
Accessories
Limited Lifetime
Patch Cables
Limited Lifetime
Patch Panels
Limited Lifetime
Raceway Conduit
Limited Lifetime
Wire Ties
Limited Lifetime
Magnetic Contacts
Limited Lifetime
2. EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY
THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON
THE FACE HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE
TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES
ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND.OR FOR BREACH OF THIS OR ANY
17
OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY
WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND
EVEN IF ADI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product
description (whether in writing or made orally by ADI or ADI’s agents), specifications, samples,
models, bulletin, drawings, diagrams, engineering sheets, or similar materials used in connection
with the Buyer’s order are for the sole purpose of identifying ADI’s products and shall not be
construed as an express warranty or condition. Any suggestions by ADI or ADI’s agents regarding
use, applications or suitability of the products shall not be construed as an express warranty or
condition unless confirmed to be such in writing by ADI. ADI does not represent that the products
it sells may not be compromised or circumvented; that the products will prevent any personal
injury or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases
provide adequate warning or protection. Buyer understands and will cause its customer to
understand that a properly installed and maintained product is not insurance or guarantee that
such will not cause or lead to personal injury or property loss. CONSEQUENTLY ADI SHALL HAVE NO
LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT
ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING. However, if ADI is held
liable whether directly or indirectly for any loss or damage with respect to the products it sells,
regardless of cause or origin, its maximum liability shall not in any case exceed the purchase price
of the product, which shall be fixed as liquidated damages and not as a penalty and shall be the
complete and exclusive remedy against ADI.
3. Limitation on Liability to Buyer’s Customers.
Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer
acknowledges that ADI shall only be deemed to give consumers of its products such statutory
warranties as may be required by law and at no time shall Buyer represent to its customers and/or
users of ADI products that ADI provides any additional warranties. By accepting the products, to
the fullest extent permitted by law, Buyer assumes all liability for, and agrees to indemnity and
hold ADI harmless against and defend ADI from, any and all suits, claims, demands, causes of action
and judgments relating to damages, whether for personal injury or to personal property, suffered
by any person, firm, corporation or business association, including but not limited to, Buyer’s
customers and/or users of the products because of any failure of the products to detect and/or
warn of the danger for which the goods were designed or any other failure of the products whether
or not such damages are caused or contributed to by the sold or joint concurring negligence or
fault of ADI.
4. Returns
Subject to the terms and conditions listed below, during the applicable warranty period, ADI will
replace Product or provide a credit at purchase at its sole option free of charge any defective
products returned prepaid. Any obligations of ADI to replace Limited Lifetime warranty products
pursuant to this warranty which result from defect are limited to the availability of replacement
product. ADI reserves the right to replace any such products with the then currently available
products, or provide a credit in its sole discretion. In the event Buyer has a problem with any ADI
product, please call your local ADI branch for return instructions:
18
For US call 1-800-233-6261
For Canada call 877-234-7378
For Puerto Rico call 787-793-8830
Be sure to have the model number and the nature of the problem available. In the event of
replacement, the return product will be credited to Buyer’s account and a new invoice issued for
the replacement item. ADI reserves the right to issue a credit only in lieu of replacement.
If any W Box Technologies product is found to be in good working order or such product’s inability
to function properly is a result of user damage or abuse, the product will be returned to Buyer in
the same condition as received and Buyer shall be responsible for any return freight changes.
5. Governing Law
The laws of State of New York apply to this Limited Warranty.
6. Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but
the remainder of the Limited Warranty shall remain in full force and effect.
19
1. Garantie limitée
Catégories de produits
Période de la
garantie
Marcher à Travers les Détecteurs de
Métaux
12 mois
Accessoires de communication
d’intrusion sans fil
12 mois
Barres de son
12 mois
UPS (systèmes d’alimentation sans
24 mois
a. Généralités
Sous réserve des modalités de la présente garantie limitée, à compter de la date de vente et
pendant la période de garantie applicable aux catégories de produits précisée au paragraphe 1b),
ADI garantit que ses produits W Box Technologies sont libres de tout vice de matériaux et de
fabrication dans des conditions d’utilisation et d’entretien normales, sauf l’usure normale. Sauf si
les lois l’exigent, la présente garantie limitée est offerte uniquement à l’acheteur et ne peut être
transférée à un tiers.
ADI n’a aucune obligation aux termes de la présente garantie limitée ou autrement dans les
circonstances suivantes :
i. le produit est mal installé, appliqué ou entretenu;
ii. le produit est installé de manière non conforme aux paramètres d’exploitation indiqués,
modifié ou mal entretenu ou réparé;
iii. le produit est endommagé par des phénomènes naturels extérieurs comme la foudre, une
surcharge, un incendie, une inondation, une force majeure ou un phénomène similaire;
iv. les défectuosités du produit résultent d’une modification non autorisée, d’une mauvaise
utilisation, d’un acte de vandalisme ou d’autres causes non liés aux vices de matériaux
ou de fabrication, ou à une défaillance des piles de quelque type que ce soit utilisées
avec les produits vendus aux termes des présentes.
ADI ne garantit que les produits portant la marque W Box Technologies qu’elle vend. Les autres
produits portant une marque de tiers sont garantis par le fabricant tiers pendant une période
définie par ce dernier, et ADI cède à l’acheteur ces garanties et uniquement les garanties offertes
par ces fabricants tiers ou vendeurs à l’égard de produits ne portant pas ses marques. ADI ne
garantit pas de produits ne portant pas ses marques et vend ces produits tels quels, conformément
à ses modalités de vente.
b. Les garanties particulières applicables aux catégories de produits sont
les suivantes :
20
coupure)
Téléviseurs
24 mois
Caméras analogiques
24 mois
Blocs d’alimentation CCTV
24 mois
Contrôles du volume
24 mois
Protection contre les surcharges
24 mois
Haut-parleurs pour le plafond
24 mois
Modules de requête de sortie
24 mois
Mise à jour des serrures magnétiques
24 mois
Distributeurs HDMI
24 mois
Serrures magnétiques
24 mois
Amplificateurs
24 mois
Parasurtenseur 6 prises
24 mois
Écrans
30 mois
Source de courant, Relais
30 mois
Bouton Hold-up
30 mois
Balluns vidéo
30 mois
Système d’alarme anti-intrusion
30 mois
Caméras analogiques HD
36 mois
analogiques DVR HD
36 mois
Détecteurs de fumée
36 mois
Bâtis
60 mois
Supports de télévision
60 mois
Caméras IP
60 mois
DVRs, NVR's
60 mois
Détecteurs de mouvement infrarouge
60 mois
Attaches pour câbles
À vie limitée
Les panneaux de brassage
À vie limitée
Câbles analogiques
À vie limitée
Câbles de raccordement
À vie limitée
21
Bornes de bus
À vie limitée
Connecteurs B
À vie limitée
Cordes d’extension
À vie limitée
Contacts magnétiques
À vie limitée
Bloc modulaire, câbles et accessoires de
communication
À vie limitée
Conduits cache-fil
À vie limitée
Câbles HDMI
À vie limitée
2. EXCLUSION DE GARANTIES ET LIMITATION DE RESPONSABILITÉ
IL N’EXISTE AUCUNE GARANTIE OU CONDITION, EXPRESSE OU IMPLICITE, DE QUALITÉ MARCHANDE,
D’ADAPTATION À UNE FIN PARTICULIÈRE OU AUTRE QUI DÉPASSE LE CADRE DE LA DESCRIPTION
FOURNIE AU RECTO DES PRÉSENTES. DANS LA PLEINE MESURE PERMISE PAR LA LOI, ADI NE SAURAIT
EN AUCUN CAS ÊTRE TENUE RESPONSABLE ENVERS QUICONQUE DES DOMMAGES CONSÉCUTIFS,
INDIRECTS, SPÉCIAUX OU PUNITIFS DÉCOULANT DU PRODUIT OU LIÉS À CELUI-CI DE QUELQUE FAÇON
QUE CE SOIT ET/OU DU NON-RESPECT DE LA PRÉSENTE GARANTIE OU DE TOUTE AUTRE GARANTIE
OU CONDITION, EXPRESSE OU IMPLICITE, OU DE TOUTE AUTRE RÉCLAMATION FONDÉE SUR LA
RESPONSABILITÉ, MÊME SI LA PERTE OU LES DOMMAGES SONT CAUSÉS PAR LA NÉGLIGENCE OU LA
FAUTE D’ADI ET MÊME SI CETTE DERNIÈRE A ÉTÉ AVISÉE DE LA POSSIBILITÉ QUE DE TELLES PERTES
OU DE TELS DOMMAGES SURVIENNENT. Les descriptions de produits (fournies par écrit ou
verbalement par ADI ou ses mandataires), caractéristiques techniques, échantillons, modèles,
bulletins, dessins, diagrammes, esquisses techniques ou documents similaires utilisés par l’acheteur
pour passer une commande visent uniquement à décrire les produits d’ADI et ne doivent pas être
interprétés comme des garanties ou conditions expresses. Les suggestions faites par ADI ou ses
mandataires au sujet de l’utilisation, de l’application ou du caractère approprié des produits ne
doivent pas être interprétées comme des garanties ou conditions expresses, sauf si ADI confirme
par écrit qu’il s’agit de garanties ou de conditions expresses. ADI ne garantit pas qu’il n’y aura
aucune atteinte à l’intégrité des produits qu’elle vend ou que les produits qu’elle vend ne seront
pas contournés, qu’ils préviendront les blessures ou les pertes matérielles en cas de cambriolage,
de vol, d’incendie ou autrement ou qu’ils constitueront dans tous les cas une protection ou un
avertissement approprié. L’acheteur comprend qu’un produit dûment installé et entretenu permet
uniquement de réduire le risque de cambriolage, de vol ou d’incendie sans avertissement, mais
qu’il ne constitue pas une assurance ou une garantie qu’un tel événement ne se produira pas ou
qu’il n’entraînera pas des blessures ou des pertes matérielles. PAR CONSÉQUENT, ADI NE SAURAIT
ÊTRE TENUE RESPONSABLE DES BLESSURES, DES DOMMAGES MATÉRIELS OU D’AUTRES PERTES
FAISANT L’OBJET D’UNE RÉCLAMATION, Y COMPRIS UNE RÉCLAMATION SELON LAQUELLE LE
PRODUIT N’AURAIT PAS DONNÉ DE SIGNAL D’AVERTISSEMENT. Toutefois, si ADI est tenue
responsable, directement ou indirectement, de pertes ou de dommages à l’égard des produits
qu’elle vend, quelle qu’en soit la cause ou l’origine, sa responsabilité n’excédera en aucun cas le
22
prix d’achat du produit, dont le remboursement sera exigé à titre de dommages-intérêts
extrajudiciaires et non d’amende, et il s’agira du recours exclusif et intégral pouvant être exercé
contre ADI.
3. Limitation de la responsabilité envers les clients de l’acheteur.
L’acheteur s’engage à limiter la responsabilité envers ses clients dans la pleine mesure permise par
la loi. L’acheteur reconnaît qu’ADI ne sera réputée avoir fourni aux consommateurs de ses produits
que les garanties qui sont exigées par la loi. L’acheteur ne doit en aucun cas déclarer à ses clients
et/ou aux utilisateurs des produits d’ADI que cette dernière offre d’autres garanties. Par
l’acceptation des produits, l’acheteur assume, dans la pleine mesure permise par la loi, la pleine
responsabilité à l’égard de toutes les poursuites, réclamations, mises en demeure et causes
d’action et à l’égard de tous les jugements se rapportant à des dommages-intérêts, que ce soit
pour des préjudices personnels ou des dommages matériels, subis par une personne, une firme, une
société ou une association commerciale, y compris les clients de l’acheteur et/ou les utilisateurs
des produits, en raison de toute omission de la part des produits de déceler le danger pour la
détection duquel ils sont conçus et/ou de donner l’alerte de ce danger ou un avertissement de
toute autre défaillance des produits, que ces dommages aient été causés par la négligence dont
ADI est l’auteur ou le coauteur, et il tiendra ADI à couvert à cet égard et prendra fait et cause pour
lui.
4. Retours
Sous réserve des modalités énumérées ci-après, durant la période de garantie applicable, ADI
remplacera le produit ou donnera une note de crédit à l’achat, à son gré et sans frais, à l’égard de
tout produit défectueux qui lui est retourné. L’obligation qui incombe à ADI de remplacer le
produit visé par une garantie à vie limitée aux termes de la garantie en question si celui-ci est
défectueux se limite à la disponibilité d’un produit de remplacement. ADI se réserve le droit de
remplacer un produit défectueux par le produit qui est disponible à ce moment-là, ou de donner
une note de crédit, à son gré. Si l’acheteur a un problème avec un produit d’ADI, il doit appeler sa
succursale ADI locale pour connaître la marche à suivre pour retourner le produit.
Aux États-Unis, composer le 1 800 233-6261
Au Canada, composer le 877 234-7378
À Porto Rico, composer le 787 793-8830
L’acheteur doit avoir en main le numéro du modèle et décrire la nature du problème. En cas de
remplacement, le prix du produit retourné sera porté au crédit du compte de l’acheteur et une
nouvelle facture sera établie pour le produit de remplacement. ADI se réserve le droit de donner
une note de crédit plutôt que de remplacer le produit.
Si l’on établit que le produit W Box Technologies n’est pas défectueux ou que son mauvais
fonctionnement résulte d’une utilisation abusive ou de dommages causés par l’utilisateur, le
produit sera retourné à l’acheteur dans le même état que celui dans lequel il a été reçu et
l’acheteur devra acquitter les frais de transport.
23
5. Lois applicables
Les lois de l’État de New York s’appliquent à la présente garantie limitée.
6. Modalités diverses
Si une modalité de la présente garantie limitée est interdite par ces lois, elle sera nulle, mais le
reste de la présente garantie limitée demeurera pleinement en vigueur.
24
LED HD LCD COLOR MONITOR
19.5” Viewing Size; VGA,
HDMI Inputs; Includes Audio
and VGA cables
CAUTION: DO NOT EXCEED
MAXIMUM LISTED WEIGHT
CAPACITY, SERIOUS INJURY
OR PROPERTY DAMAGE MAY
OCCUR!
Loading...